lock AUDI A7 2014 Manual PDF

264 What do I do now?
What do I do now?
Emergency warning
triangle
App lies to vehicles: with emerge ncy warning triangle
The warning triangle is located on the inside
of the trunk lid .
-
"' M ~ 0 6
~ ~
Fig. 207 Tr unk lid: Warning triang le
.,. To open the cover , turn the locking mecha­
nism and pull the cover downward .
" m
.,. Remov e the warning triang le from its hold­
er.
The rear lid is only designed to hold the warn ­
ing triangle offered by the original accessories
program. If you would like to retrofit your ve­
hicle with a warning triangle, p lease contact
your authorized Audi dealer.
Vehicle tool kit
Vehicle tool kit and jack
The vehicle tool kit is located in the luggage
compartment under the cargo floor cover.
Fig. 208 Lu ggage compartme nt: cargo floor cover
folded upward/spa re t ire
Fig. 209 Trunk lid: Veh icle tool kit
.,. Fold the floor to the seatback with the help
of the handle .
.,. Turn the handwheel counter-clockwise
~ fig. 208 and remove the spare t ire to
reach the vehicle tool kit.
The onboard tool k it includes:
- Hooks to remove the wheel covers*
- Plastic hook to remove wheel bolt covers*
- Wheel bolt wrench
-Alignment pin for changing wheels
- Screwdriver with reversible blade
- Towing loop
-Jack
Before storing the jack, make sure it is wound
back down as far as it will go.
A WARNING
Improper use of the vehicle jack can cause
serious pe rsonal injuries.
- Never use the screw driver hex head to
tighten wheel bolts, since the bolts can­
not attain the necessary tighten ing tor­
que if you use the hex head, potentially
causing an accident .
- The factory-supplied jack is intended on­
ly for your vehicle model. Under no cir­
cumstances sho uld it be used to
lift
heavy veh icles or other loads; you risk in­
juring yo urself.
- Never start the engine when the vehicle
is raised, which could cause an accident.
- Support the vehicle securely with appro­
p riate stands if work is to be performed
underneath the vehicle; otherwise, there
is a potential risk for injury. .,.

-Never use the jack s upplied with your
Audi on another vehicle, particularly on a
heavier one. The jack is only suitable for
use on the vehicle it came w ith.
@ Tips
- Some of the on board items listed above
are provided on certain mode ls only or
are optional extras.
- Before you can raise your vehicle using
the jack, you must activate the jack ing
mode
c:> page 268.
Space-saving spare tire (compact spare
tire)
The spare tire/wheel is located in the luggage
compartment under the cargo floor cover . It
is intended for short-term use only.
Taking out the sp are tire
... Fold the floor to the seatback with the help
of the handle.
... Turn the large screw~
page 264, fig . 208
counter-clockw ise .
.,. Take out the spare tire .
.,. Always store the vehicle too l kit, the jack*
and the replaced tire in the l uggage com­
partment
c::> page 136 .
Using the spare tire (compact spare tir e)
The compact spare tire is only intended for
emergenc ies until you can reach a repair shop.
Replace it as quick ly as poss ible with a stand­
ard wheel and t ire.
There are some restrict ions on the use of the
compact spare t ire. The compact spare t ire
h as been des igned specifically for you r type of
veh icle. It must not be swapped wi th a com­
pact spare tire from another type of vehicle .
Snow chains
For technica l reasons, the use of snow chains
on the compact spare tire is
not p ermitt ed .
If you do have to dr ive with snow chains and a
front tire fails, mount the spare wheel w ith
tire instead of a rear t ire . Install the snow
What do I do now? 265
chains on the rear tire and use it to rep lace
the defective front tire .
A WARNING
-Never use the spare t ire if it is damaged
or if it is worn down to the tread wear in­
dicators.
- If the spare tire is more than 6 years old,
use it only in an emergency and with ex­
treme caution and careful driv ing.
- The spare tire is intended only for tem­
porary and short-term use . It should be
replaced as soon as poss ible with the
normal wheel and tire .
- After mounting the compact spare t ire,
the t ire pressure must be checked as
soon as possible . The tire pressure of the
compact spare t ire must be 4. 2 bar; oth­
erwise, you risk having an a ccident.
- Do not dr ive faster than SO mph (80 km/
h). You ris k having an accident .
- Avoid full-throttle acceleration, heavy
brak ing, and fast cornering. You risk hav­
ing an accident .
- Never drive using more than one spare
wheel and ti re. You r is k having an acci­
dent.
- Normal summer or winter t ires must not
be mounted on the compact spare wheel
rim.
- For technical reasons, the use of tire
chains on the spa re tire is not permitted .
If i t is necessary to d rive with t ire chains,
the spare wheel must be mounted on the
front ax le in the event of a flat in a rear
tire. The newly available front whee l
must then be insta lled in place of the
rear wheel w ith the flat tire. Installing
the t ire cha in before mounting the whee l
and tire is recommended .
- Loose items in the passenger compart­
ment can cause serious personal injury
during hard brak ing or in an accident.
Never store the inflatable spare tire or
jack and tools in the passenger compart­ ment. •
•

266 What do I do now?
Changing a wheel
Before changing a wheel
Observe the following precautions for your
own and your passenger's safety when chang ­
ing a wheel .
... After you experience a tire failure, pull the
car well away from moving traffic and try to
reach
level ground before you stop o ,&.
... All passengers should leave the car and
move to a safe location (for instance, behind
the guardrail)
o A-
.. Engage the parking brake to prevent your
vehicle from rolling unintentionally
o ,&.
... Move selector lever to position Po ,& .
• If you are towing a trailer, unhitch the trailer
from your vehicle .
... Take the
jack and the spare tire out of the
luggage compartment
o page 264,
o page265.
A WARNING
You or your passengers could be injured
while changing a wheel if you do not fol­
low these safety precautions:
- If you have a flat tire,
move a safe dis­
tance off the road. Turn off the engine,
turn the emergency flashers on and use
other warning devices to alert other mo­
torists.
- Make sure that passengers wait in a safe
place away from the vehicle and well
away from the road and traffic.
- To help prevent the vehicle from moving
sudden ly and possibly slipping off the
jack, always fully set the parking brake
and block the wheel diagonally opposite
the wheel being changed . When one
front wheel is lifted off the ground, plac­
ing the Automatic Transmission in P
(Park) will
not prevent the vehicle from
moving.
- Before you change a wheel, be sure the
ground is level and firm.
If necessary,
use a sturdy board under the jack.
-
-Always store the vehicle tool kit, the jack
and the replaced tire in the luggage com­
partment
opage 136.
@ Tips
Before changing the whee l, you must acti­
vate the jacking mode, so that the auto­
matic controls for the Adaptive Air Sus­
pension* do not make it more difficult to
lift the vehicle with the jack
o page 268 .
Changing a wheel
When you change a wheel, follow these­
quence described below step-by-step and in
exactly that order.
l. Activate the vehicle jack mode*
opage 268 .
2. Remove the decorative wheel cover* . For
more details see also
o page 267, Deco­
rative wheel covers
or o page 267,
Wheels with wheel bolt caps.
3. Loosen the wheel bolts o page 268.
4. Locate the proper mounting point for the
jack and align the jack below that point
opage 268.
5. Raise the car with the jack o page 268.
6. Remove the wheel with the flat tire and
then install
the spare opage 270.
7. Tighten all wheel bolts lightly .
8.
Lower the vehicle with the jack .
9 . Use the wheel bolt w rench and
firmly
tighten all wheel bolts o page 268.
10. Replace the decorative wheel cover*.
11. Deactivate the vehicle jack mode * in the
MMI:
I CARI function button > (Ca r)* sys­
tems
control button > Servicing & checks
> Air susp.: jack mode > Off.
The vehicle jack mode* switches off automati­
ca lly at speeds above 6 mph (10 km/h) .
A WARNING ,-
Always read and follow all WARNINGS and
in format ion
o .&. in Raising the vehicle on
page 269
and opage 271.

268 What do I do now ?
loosening and tightening the wheel
bolts
The wheel bolts must be loosened before rais­
ing the vehicle.
Fig. 212 Changing a wheel: loosening the whee l bo lts
loosening
.. Slide the
w heel wr ench onto the wheel bolt
as far as it will go .
.. Take tight hold of the
end of the wrench
handle and turn the wheel bolts co unte r­
clock w ise about one single turn in the direc­
t ion of arrow
c:> fig. 212 .
Tighten ing
.. Slide the wheel wrench onto the wheel bolt
as far as it will go.
.. Take tight hold of the
end of the wrench
handle and turn each wheel bolt
clock wise
until it is seated.
A WARNING
- Do not use force or hurry when changing
a whee l - you can cause the vehicle to slip
off the jack a nd cause serious persona l
injuries.
- Do not loosen the wheel bolts more than
one turn
before you raise the veh icle with
the jack. - You risk an injury.
@ Tips
- Never use the hexagonal socket in the
handle of the screwdriver to loosen o r
tighten the wheel bo lts.
- If a wheel bolt is very tight, you may fi nd
i t easier to loosen by ca refully p ushi ng
down on the end of the wheel bolt
wrench with
one foot only . As you do so, hold on to the car to keep your balance
and take care not to slip.
Raising the vehicle
The vehicle must be lifted with the jack first
before the wheel can be removed.
Fig. 213 Sill panels: markings
Fig. 2 14 Sill: pos ition ing t he ve hicle jack
.. Activate the vehicle jack mode* in the MMI:
!CARI function button> (Car) * syst ems con­
trol button>
Serv icing & ch eck s> Air su sp .:
ja ck mode > On .
.,. Engage the parki ng brake to prevent your
veh icle from rolling unintentionally .
.,. Move the
sele cto r lever to p osition P .
.. Find the mark ing (imprint) on the sill tha t is
nearest the whee l that will be changed
c:>fig. 213. Be hind the marking, there is a
lifting point on the sill for the vehicle jack.
.. Ve hicles with a si ll: remove the cover from
the sill before lift ing the veh icle w ith a vehi­
cle jack c:>
page 269 .
.,. Turn the ve hicl e ja ck located under the lift­
ing point on the sill to ra ise the jack until its
arm @c:>
fig. 214 is located under the des­
ignated plastic moun t c:>
£ c:> (D .
.. Align the jack so that its arm @c:>
fig. 214
engages in the designated lifting point in
the door sill and the movable base @ lies
IJJ>

2 70 What do I do now ?
Taking the wheel off/installing the spare
Follow these instructions step-by-step for
changing the wheel.
Fig. 216 Changing a whee l: u sing the screwdriver han­
dle (w ith th e blade removed} to turn the bolts
Fig. 2 17 Changing a w hee l: a lignm en t pi n ins ide t he
top hole
Afte r you have loosened a ll wheel bolts and
r a ised the veh icle off the ground, remove a nd
replace the wheel as follows:
Removing the wheel
.. Use the hexagonal soc ket in th e screwdriv­
er handl e
to complete ly remove the top­
most wheel bo lt and set it as ide on a
clean
s ur face qfig. 216 .
.. Screw the threaded end o f the alignment
pin
from the tool k it hand -tight into the
empty bolt hole
q fig. 217.
.. Then remove the other wheel bo lts as de­
scribed above .
.. Take off the wheel leav ing the alignment pin
in the bolt hole
c:> (D .
Putting on the spare whe el
.. Lift the spare wheel and ca refully slide it
over the a lignment pin to guide it in place
c:> Q).
.. Use the hexagonal socket in the screwdriver
handle to screw in and tighten all whee l
bolts
slightly.
.. Remove the a lignment pi n and insert and
tighten the remaining wheel bolt slightly
like the rest .
.. Tu rn the jack hand le counter-clockwise to
lower the veh icle until the jack is fully re­
leased .
.. Use the wheel bo lt wrench to tighten all
wheel bo lts f irm ly
q page 268 . Tighten
them
crosswise, from one bolt to the (ap ­
proximately) opposite one, to keep the
wheel centered.
(D Note
When remov ing or installing the whee l,
the rim cou ld hit the b rake roto r and dam­
age the roto r. Work carefu lly and have a
second person help you .
(D Tips
Never use the hexagonal socket in the han­
d le of the screwdriver to loosen or tighten
the wheel bolts.
- Pull the reversible blade from the screw ­
dr iver before you use the hexagonal
socket in the hand le to turn the w heel
bolts .
- When mount ing tires w ith
unidirectional
tread design
make sure the tread pat­
t er n is po inted t he righ t way
~page 271.
-The wheel bolts shou ld be clean and easy
t o t urn . Check for dirt an d co rrosion on
the mat ing surfaces of both the w heel
an d t he hub . Remove all d irt from these
s urfa ce s be for e remou nting the whee l.

274 Fu ses and bulb s
No. Equ ipment Amps
8
Headlight range adjustment/
5/7,S
adaptive lighting system
10 Left headlight
(headlight with
7,5
adaptive light)
11 Supplementary heater
s
F
u se p ane l@ (b ro wn)
No . Equipmen t Amps
1 Climate control
10
2 Climate control system blower 40
3 Diagnostic interface
10
4 E lectrical ignition lock
s
s
Power steering column adjust-
s ment
6 Steering column switch module
10
7 Power
steering column adjust-
ment 25
8 Light switch
s
Luggage compartment fuse assignment
Fig
. 22 1 Luggage compartment: fuse panel with plas­
tic bracket
Fuse p anel @ (b la ck )
No. Equipment Amps
4 E lectromechanical parking brake 30
s Electromechanical parking brake
30
6 Front door
(front passenger's
30
s ide)
7 Rear exter ior lighting
30
Rear sun shade, closing aid, lug-
8 gage compartment
lock, con-
20
venience key, START ENGINE
STOP, fuel filler door
No. Equipment Amps
9 Power seat adjustment
15
10 Parking system
s
11 Rear seat
heating
30
Fuse pan el@ (r e d )
No . Equipment Amps
l Left belt tensioner
25
2 Right belt tensioner 25
3 Socket/cigarette
lighter
20
4 Socket 20
5 Electromechanical
parking brake
5
6 adaptive ai r suspension 15
7 Rear door
(front passenger's
30
side)
8 Rear exterior lighting 30
9 Luggage compartment
lid con-
30
t rol module
10 Telephone 5
11 Sound amplifier 30
12 Rear
spoiler (Sportback)
20
Fuse p anel© (brown)
No . Equipment Amps
1 Radio receiver,
Sound amplifier/
30/20
MMI unit/drives
2 Tank leak detection system
s
4 AEM
control module/battery
10/15
module
6 Battery fan 35
7 Rad
io receiver 7,5
8 Rear Seat Entertainment 7,5
9 Automatic dimming interior
5/15
rearview mirror/battery module
10 Parking system 5
Fuse pan el@ (gre en)
No . Equipment Amps
1 pre sense 5
2 Electromechanical parking brake
s
3 adaptive
air suspension
5
4 Automatic transmission 7,5

2 78 Emergency situations
-When connecting jumper cables, make
sure that they cannot get caught in any
moving parts in the engine compart­
ment.
- Before you check anything in the engine
compartment, always read and heed all
WARNINGS
<=) page 227.
(D Note
Improper hook-up of jumper cables can ru­
in the generator.
- Always connect POSITIVE( +) to POSI­
TIVE(+), and NEGATIVE(-) to NEGATIVE
( - ) ground post of the battery manager
control unit.
- Check that all screw plugs on the battery
cells are screwed in firmly . If not, tighten
plugs prior to connecting clamp on nega­
tive battery terminal.
- Please note that the procedure for con­
necting a jumper cable as described
above applies specifically to the case of
your vehicle being jump started. When
you are giving a jump start to another ve­
hicle , do
not connect the negat ive( -) ca­
ble to the negative( -) terminal on the
discharged battery@<=)
fig. 223. In­
stead, securely connect the negative( -)
cable to either a solid metal component
that is firmly bolted to the engine block
or to the engine block itself. If the bat­
tery that is being charged does not vent
to the outside, escaping battery gas
could ignite and explode!
Emergency towing
with commercial tow
truck
General hints
Your Audi requires special handling for tow­
tng.
The following information is to be used by
commercia l tow truck operators who know
how to operate their equipment safely.
-Never tow your Audi. Towing will cause
damage to the engine and transmission .
- Never wrap the safety chains or winch ca­
bles around the brake lines.
- To prevent unne cessary damage , your Audi
must be transported with a flat bed truck.
- To load the vehicle on to the flat bed, use
the towing loop found in the vehicle tools
and attach to the front or rear anchorage
<=)page 278 and ¢page 279.
.&_ WARNING
=
A vehicle being towed is not safe for pas-
sengers. Never allow anyone to ride in a
vehicle be ing towed, for any reason.
Front towing loop
Only install the front towing loop when it is
needed.
Fig. 224 Front bumper: cover
Fig. 225 Front bumper : in stalling the towing loop
-
The towing loop fits into the threaded hole lo ­
cated on the right side of the front bumper
and covered by a smal l cover when not in use.
.,. Remove the towing loop from the vehicle
tool kit.

heavy components such as the engi ne
b lock or transmiss ion are removed.
- W hen removing heavy components like
these, ancho r vehicle to hoist o r add cor­
respond ing weig hts to ma inta in the cen ­
ter of g ravity . Otherwise, the vehicle
m ight tilt o r sli p off the hoist, causi ng
ser ious p erso na l in ju ry.
([) Note
-Be awa re of the fo llowing points befo re
li fting t he vehicle:
- The vehicle should never be lifted or
jacked up from underneath the engine oil pan, the transmission housing, the
front or rear axle or the body side
members. This could lead to serious
damage.
- To avoid damage to the underbody or
chassis frame , a rubber pad must be
i nserted between the floor jack and
the lift points.
- Before driving over a workshop hoist,
check that the veh icle weight does not
exceed the permissible lifting capacity
of the hoist.
- Before driving over a workshop hoist,
ensure that there is sufficient clear­
ance between the hoist and low parts
of the vehicle.
Emergency situations 281
•
•

28 6 Con sum er Inf ormation
comp lexity of today's automobi les, have
steadi ly reduced the scope of maintenance
and repairs which can be carried out by vehicle
owners.
Also, s afety an d e nvir onm ent al con­
cerns place very strict limits on the nature of repairs and adjustments to engine and trans ­
miss ion pa rts which an owner can perform .
Maintenance, adjustments and repa irs usua lly
require special tools, testing devices and oth­
er equipment avai lab le to specially trained
workshop personnel in order to assure proper
performance, reliab ility and safety of the vehi­
cle and its many systems .
Improper ma intenance, adjustments and re ­
pa irs can impair the operation and reliab ility
of your vehicle and even void your vehicle war­ ranty. Therefo re , proof of servici ng in accord­
ance w it h the ma intenance sched ule may be a
condition for upholding a possible warranty
claim made within the warran ty period.
Above all, operational safety can be adve rsely
affected, c reating unnecessary risks for you
and your passengers.
If in doubt about any serv icing, have it done
by your author ized Audi dealer or any other
p roperly equipped and qualified workshop .
We strong ly urge you to give your authorized
Audi dealer the opportunity to perform all
schedu led maintenance and necessary repairs .
Your dea ler has the facilities, or iginal parts
and tra ined spec ialists to keep your vehicle
running properly .
Performing lim it e d m aint en anc e y ourself
The fo llowing pages describe a limited num­
ber of procedures which can be performed on
you r vehicle with ordinary too ls, shou ld the
need arise and trained personnel be unavaila­
ble. Before performing any of these proce­
dures, always thoroughly read all of the app li­
cable text and ca refully follow the instruc­
tions given. Always rigorously obse rve the
WARNINGS p rovided .
Before you ch eck anything in th e engin e
compartme nt, alway s read an d heed all WARNINGS
¢ & a
nd ¢ & in Working in the
engine comportment on page
22 7 .
A WARNING
--Serious personal in jury may occur as a re-
sult of improperly performed mainte­ nance, adjustments or repa irs.
- Always be extremely careful when work­
ing on the vehicle. Always follow com­
monly accepted safety pract ices and gen­
eral common sense. Never r isk personal
in jur y.
- Do not attempt any of the maintenance,
checks or repairs descr ibed o n the fol­
lowing pages if you are not fu lly fam iliar
with these or other procedures with re­ spect to the ve hicl e, or are uncerta in how
to proceed .
- Do not do any work withou t the proper
too ls and equipment . Have the necessary
work done by your authorized A udi deal ­
er or anothe r properly equipped and
qualified workshop.
- The engine compar tment o f any motor
vehicle is a potentially hazardous area. Never reach into the area around or
touch the rad iator fan. It is temperature
control led and can sw itch on suddenly -
even when the engine is off . The radiator
fan switches on automatically when the
coo lant reaches a ce rtain temperature
and will cont inue to ru n until the coo lant
tempera ture drops.
- Always sw itch off the ignition before any­
one gets under the vehicle.
- Always support your veh icle with safety
s tands if it is necessary to work under­
neath the vehicle. The j ack s upp lied with
the vehicle is not adequate for this pur­
pose and cou ld co llapse causing serio us
pe rsonal injury .
- If you must work underneath the vehicle
wit h the wheels on the ground, a lways
make sure the vehicle is on leve l ground,
that the wheels are a lways secure ly
blocked and that t he engine cannot be
started .

29 0 Index
A
Accessories . ...... ..... ... .. .. .... . 28 7
Active lane ass ist ... ... .. .. .. .. .. .. .. 95
Activating and deactivating . . . . . . . . . . . 96
C leaning the camera area .. .. .. .. .. . 214
Descr ipt ion ... ........... .. .. .... .. 95
I nstrument cluster indicator light . . . . . 96
Messages . . . . . . . . . . . . . . . . . . . . . . . . . 96
Notes on instrument cluster display . . . . 96
Setting the steering wheel vibrat ion . . . . 97
AC (automatic cl imate control) . .. .. .. .. 72
AC (climate control) . . . . . . . . . . . . . . . . . . 70
Adaptive air suspension/sport . ... .. .. . 102
Adapt ive cruise control . . . . . . . . . . . . . . . . 86
C leaning the senso r ....... .. .. .... . 214
Messages ............... .. .. .. .. .. 93
Request for driver intervention . . . . . . . . 91
Stop-and-go traffic . . . . . . . . . . . . . . . . . 90
Adapt ive Lig ht (defective) ... .. .. .... .. 23
AdBlue .. .. .. .. . .......... .. .. .... . 223
F illing . .. .. ............... .. .... . 225
Messages in the instrument cluster dis-
play ... .. .. ... .... .... .. .. .. .. .. . 224
Adding Eng ine coolant ........... .. .. .. .. . 235
Eng ine oil ................. .. .... . 232
W indshield washer fluid . ...... .. .. . 241
Additives Eng ine oi l ............... .. .. .... . 232
Adj usting
A ir dist ribution (au tomatic climate con-
trol) .. ... ... .. .. ..... ... .. .. .... .. 73
ai r distribution (climate control) ... .. . . 70
Front seats . . . . . . . . . . . . . . . . . . . . . . . . 53
Instrument illum inat ion ..... .. .... .. 47
Steer ing column e lectrically .. .. .... .. 75
Steer ing column manually ... .. .. .. . . 75
Temperature (automat ic climate co ntrol) 73
Temperature (climate control) .... .. .. 70
A irbag system . . . . . . . . . . . . . . . . . 149, 170
Advanced Airbag System ... .. .. .... . 153
Advanced Airbag System components . 157
Care ..... .. ................ ... ... 165
C hi ldren ... ... .... ...... .. .. .. .. . 177
C hil d restra ints ........... .. .. .. .. . 177
Componen ts (front airbags) .. .. .. .. . 157 Danger of fitting a ch
ild seat on the front
passenger seat ... .. ... ..... ... .. .. 151
Disposa l .. .. .. .. ... .. ..... ... .. .. 165
Front a irbags . . . . . . . . . . . . . . . . 153, 155
How do the front airbags work? .. .... 159
How many a irbags does my vehicle
have? ...... .. .. .. ... ... ... .. .. .. 157
How the Advanced Airbag System com-
ponents work togethe r ......... .. .. 159
Important safe ty instru ct ions on the
knee airbag system .. .. ..... ... .. .. 168
Important things to know .. ... ... . .. 149
Knee airbags ..... .. ... ..... ... .. .. 166
Monitoring .... .. ............. .... 161
PASSENGER AIR BAG OFF light ... .... 162
Repairs ... .... .. ............. .... 165
Safety instructions ................. 164
S ide a irbags ... .. ... .. .. ... ..... .. 169
S ide curtain airbags ... ...... ... .. .. 172
Warning/ind icator lights ........ .. .. . 19
Warning/Indicato r lights ....... .. .. 161
When must the system be inspected? 161
Aircraft Transporting your vehicle
Alcantara 280
Cleaning .. .... .. ............. .... 216
All -wheel drive .... .. ... ..... ... .. .. 201
Winter tires ..... ... .. ..... ... .. .. 258
Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Amb ience lighting .............. .... . 47
Anti-freeze
refer to Engine coolant . ..... ... .. .. 234
Anti- lock b rak ing system ............ . 196
Wa rning/ind icator lights . . . . . . . . . 19, 20
Anti-slip regulation ............. .. .. 196
Warning/ind icator lights .. ... ..... .. . 19
Anti-theft systems Electronic immobi lizer .. ..... ... .. .. . 33
Asht ray .... .... ................... . 59
Audi braking guard
refer to brak ing guard ............. .. 86
Audi drive select
refer to drive select ............ .... 102
A udi Serv ice Repair Manuals and Litera-
tu re ... .. .. .. .. .. .. .... . ..... ... .. 285