cooling AUDI A8 1999 D2 / 1.G ATQ Engine Check DTC Memory And Erase DTC Memory Workshop Manual

01-40

DTC
DTC text
Corrective action
SAE
VAG


P1250 17658
Fuel level too low
4)
Repair Manual, Electrical Equipment, Repair Group 01, On Board Diagnostic
(OBD) of instrument cluster; Read Measuring Value Block
- Fill fuel tank with fuel
- Check wire connection between Engine Control Module (ECM) and instrument
cluster according to wiring diagram
- Check signal from sender for fuel gauge and fuel gauge
P1296 17704 Malfunction in cooling
system
1)
Repair Manual, Engine Mechanical, Repair Group 19; Cooling system
components, removing and installing - Check coolant temperature sensor Page 28
-23
- Check coolant regulator
1) For these malfunctions, ECM does not switch on the Malfunction Indicator Lamp (MIL) unless malfunction is recognized
again after another engine start. Meaning of Malfunction Indicator Lamp (MIL) Page 01
-3 .
4) The DTC "Fuel Level Too Low" is stored when there is/was too little fuel in fuel tank. The DTC is stored as a static
malfunction and is not switched to sporadic even if fuel tank has been filled with fuel (e.g. by the customer) in the meantime.
In this way, it can be determined that subsequent malfunctions were caused by lack of fuel, e.g. combustion misfires or
oxygen control related malfunctions.
Pa
ge 31 of 52 Check DTC Memor
y (function 02
) and Erase DTC Memor
y (function 05
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.2