warning AUDI A8 2018 Owner's Guide

Lights and Vision
,.. Switch the windshield wipers off (position@
~page 50, fig. 56).
,.. Select: the ICARI function button > Car systems
control button > Service & control> Wiper
change position. > On.
Removing the wiper blade
,.. Fold the windshield wiper arm away from the
windshield.
,.. Press the locking knob@ c:> fig. 57 on the wiper
blade . Hold the wiper blade firmly.
,.. Remove the wiper blade in the direction of the
arrow.
Installing the wiper blade
,.. Insert the new wiper blade into the mount on
the wiper arm @until it clicks into place.
,.. Place the wiper arm back on the windshield.
,.. Turn the service position off.
.,&. WARNING
For safety reasons, the windshield wiper
blades should be replaced once or twice each
year.
@ Note
- The windshield wiper blades must only be
folded away when in the service position! Otherwise, you risk damaging the paint on
the hood or the windshield wiper motor.
- You should not move your vehicle or press
the windshield wiper lever when the wiper
arms are folded away from the windshield.
The windshield wipers would move back in­
to their original position and could damage
the hood and windshield.
- You can also use the service position, for ex­
ample, if you want to protect the windshield
from icing by using a cover.
- You cannot activate the service position
when the hood is open.
52
Digital compass
Switching the compass on and off
Applies to: vehicles with digital compass
Fig. 58 Rearview mirror : d ig ital compass activated
,.. To turn the compass in the mirror on or off,
press the button @ until the compass display
in the mirror appears or disappears.
The digital compass only works when the ignition is turned on. The directions are indicated with ab­
breviations:
N (north), NE (northeast), E (east),
SE (southeast), S (south), SW (southwest), W
(west),
NW (northwest) .
(D Tips
To prevent inaccurate compass readings, do
not bring any remote controls, electrical devi­
ces or metallic objects near the mirror.

lL t:0 ....
"' ......
"' .... 0 0 :c ' Adjusting the magnetic zone
Applies to: vehicles with digital compass
The magnetic zone must be adjusted correctly
for the compass to read accurately .
®
Fig . 59 Nort h Amer ica : ma gnet ic zo ne map
... Press and hold the button @i=> fig. 59 unt il the
number of the selected magnetic zone appears
i n the rearv iew mirror .
... Press the button @repeatedly to select the
correct magnetic zone . The select io n mode
tu rns off afte r a few se co nds.
Calibrating the compass
Applies to: vehicles with dig ital compass
You must recalibrate the compass if it does not
display the correct direction .
... Press and hold the button @ i:> page 52, fig. 58
un til a C appears in t he i nterio r re ar view mirro r .
.,. Drive in a c ircle at about 6 mph ( 10 km/h) unt il
a d irec tion is disp layed i n the rea rview mir ror.
_& WARNING
- T o red uce the risk to yo ursel f and ot he r driv­
ers, calibrate the compass i n an area where
there is no traffic.
Lights and V ision
- Always pay attention to the traffic and the
area around your vehicle if you are reading
the compass while dr iv ing .
53

Seats and stor age
Seats and storage
General information
A WARNING
Refer to ¢ page 208, Driving safety for im­
portant information, tips, suggestions and
warnings that you should read and follow for
your own safety and the safety of your pas­
sengers.
Front seats
Controls
Seat forward/back adjustment, seat height, backrest and seat cushion angle.
F ig. 60 Fr ont seat: adjusting the seat
@ -Moving the seat forward/back: press the but ­
ton forward/back .
@-Moving the seat up/down: press the button
up/down. To adjust the front seat cush ion, press
the front button up/down . To adjust the rear seat
cushion, press the rear button up/down .
®-Switching the massage function* on/off. Se­
lect the type of massage with the multifunction
button ¢ page 54.
©-adjusting the backrest angle: press the but­
ton forward/back.
© -Comfort head restraint* ¢ page 58
CD-Mu ltifunction button* ¢ page 54.
A WARNING
-The power front seats can also be adjusted
when the ignition is switched off. For this
54
reason, children should never be left unat­
tended in the vehicle because they could be
injured.
- Only adjust the front seat when the vehicle
is stationary. Otherwise, this increases the
risk of an accident
- Exe rcise caution when adjusting the seat
height. Unsupervised or careless seat ad­
justment can pinch fingers or hands causing
injuries .
- The front seat backrests must not be re­
clined too far back when driving, because
this impairs the effect iveness of the safety
be lts and airbag system, which increases
the r isk of injury.
Multifunction button
App lies to: vehicl es wi th memo ry func tion
You can adjust the massage function, upper sec ­
tion of the backrest, lumbar support, side bol­
sters, upper thigh support and safety belt height
using the multifunction button.
Fig. 61 Infotainment system: seat settings
Operating
.. If you turn the multifunction button CD
¢ page 54, fig. 60 to the left or to the right,
the possible seat settings @are shown in the
Infotainment system
¢ fig. 61.
.. To select a seat setting, turn the multifunction
button
CD in the corresponding direction until
the desired seat setting is outlined in red .
.. The arrows @ represent the possible adjust­
ments. To lower the lumbar support, for exam­
ple, press the mult ifunct ion button
CD down-
wa rd. The corresponding arrow © lights up.
..,.

lL t:0 ....
"' " "' .... 0 0 :c ' .,. To fo ld t he leg suppo rt out/ in, press and ho ld
the left/right button @ unti l the leg support
reaches the desired position.
.,. To angle the leg support so that it is more up­
right/more recl ined or to move it forward/back,
adjusting the front passenger's seat according ­
ly .
Adjust ing the f ront pa ssenge r's seat
.,. Make s ure that the front passenger's seat ad­
justment is switched on in the Infotainment system
c:> page 58.
.,. To activate the front passenger's seat adjust­
ment, press the button ®·
.,. To adjust the front passenger's seat forward/
back, press the butto n© forward/back.
.,. To move the front p assenger's seat up/down,
press the button © upward/downwa rd.
.,. To adjust the front passenger's seat back rest so
that is more upright/more reclined, press the
button ®forward/back.
.,. Applies to vehicles with reclining seat*: to ad­
just the reclining/standard seat position, press and hold the button
@ /(D until the front pas ­
senger's seat reaches its end posit ion .
,&. WARNING
-The power seats can also be adjusted w hen
the igni tion is switched
o ff. For this reason,
children should never be left unattended in
the vehicle beca use they cou ld be injured.
-Be careful whe n adj usting the sea t. Unsu­
pervised or c areless seat adjustment can
pinch fingers or hands ca using injur ies .
-Applies to vehicles with reclining seat* :
-Do not use the front passenger's seat for
seating when it is in the recl ining posit ion.
This inc reases the risk of ser ious injury or
death.
-Never adjust the reclining position when
the front passenger's seat is occupied .
This inc reases the risk of injury.
-Do not tilt the display if the driver's v iew
of the right exterio r mirror w ill be ob­
s tructed .
-Make sure the area between the leg sup­
port and the front passenger's seat back-
S eats and storag e
rest is clear before fo ld ing the leg support
in so that you are not p inched.
(D Tips
-T he massage function switches off auto­
matically after approximate ly 10 minutes .
-If you cannot adjust the reclining seat* or
the front passenger's seat from the rear, it
is possib le that:
-the front passenger's seat memory func­
tion is switched
off c:> page 59, or
-the child safety lock is switched on (the ~
button c:> page 3 7 or the r ight t button
c:> page 37 is tu rned on in the d river's
door), or
-the front passenger seat adj ustment is
switched
off in the Infota inment system
c:>page 58 .
Massage function remote control
Appl ies to: vehicles wit h reclinin g seat an d massa ge function
Fig . 66 Remote control: recli ning seat massage funct ions
T he remote controls are located in the rear cen­
te r console
c:> page 62, fig. 72 . The massage
func tion is only ava ilable when the igni tion is
swi tched on.
.,. To open the remote co ntro l compartment,
press the left b utton and fold the center arm­
rest upwa rd.
.,. To adjus t the massage type, press the app ropr i­
ate
button @-@ . The LED in the button turns
on.
.,. To adjust the speed/i ntens ity, tu rn the thumb ­
wheel@I® . The LEDs indicate the speed/in­
tensity.
.,. Press the selected massage type again to
sw itch the massage function
off .
57

u. co .... N
" N .... 0 0 :c ' ~ To move t he head restraint up, ho ld it at the
sides with both hands and slide it upward unti l
you fee l it click into place.
~ To move the head restraint down, press the
button (small
arrow)¢ fig. 68 and slide the
head restraint downward.
A WARNING
Always read and follow the applicab le wa rn­
ings
¢page 211.
Memory function
Description
Applies to: vehicles with memory function
-
Using the memory function, you can quickly and
eas ily store a personal seat profile for the driver
and front passenger as well as for the outer rear
seats* and recall the settings. The memory func­
tion is controlled us ing the remote control key
and the memory buttons in the drive r's/front
passenger's door and in the rea r doo rs*.
The driver's seat profile is stored again and as­
signed to the remote control key each time the
ve hicle is locked. When you open the door, the
seat profi le is automat ica lly reca lled. If two pea-
Remote control
key
Driver
Seat X
Hea d rest raint X
Steering wheel* X
Sa fety belt* X
Both exterior mirrors* X
Remote control key
Applies to: vehicles with memory function
The functio n must be switched on so that the
d river's seat p rofile will be assig ned to t he re ­
mote cont rol key w hen locking the vehicle .
~ Select: the ICARI function button > Car systems
contro l bu tton > Vehicl e setting s > Driver' s
s eat > Remo te control ke y > On.
Seat s and sto rag e
(D Tips
To prevent the head restraints from running
i nto the headline, they are automatically
moved forward or upward when the seat is
adjusted.
ple use the vehicle, it is recommended that each
person always uses the ir "own" remote control
key.
T wo seat profiles can be stored using the memo ­
ry buttons in the driver's/front passenger's door
respectively, and one seat profile can be stored in
each of the rear doors*. Once they are stored,
these seat profiles can be selected at any time.
The following sett ings are stored:
Memory button
Driver Front passenger Outer rear seats*
X X X
X X
X X X
X
(D Tips
If yo u do not wish to have t he seat profi le for
another dr iver assigned to the remote cont rol
key, sw itch the memory function
off in the In­
fotai nment system or using the
!O FF ! button
¢page 60.
59

Seats and storage
Memory buttons
Applies to: vehicles with memory funct ion
F ig. 69 Drive r's door : mem ory fu nctio n bu ttons
The memory buttons are located in the driver's
door, front passenger 's door and in the rear
doors* .
Switching the memory function on/off
• Press the IOFFI button to switch the memory
funct ion on/off . The LED in the button turns on
when the memory function is off . Seat profiles
are neither stored nor recalled.
Storing a seat profile
• Press the ISETI button . When the word SET
lights up, the memory is ready to store set­
tings.
• Now press a memory button briefly. A tone
confirms that the sett ings were stored .
Accessing a seat profile
• If the driver's door is open and the ignit ion is
switched off, press the memory button .
• If the driver's door is closed or the ignit ion is
switched on, press and hold the memory but­
ton until the seat adjustment is complete .
A WARNING
-For safety reasons, the seat setting can only
be recalled when the vehicle is stationary,
otherwise there is a risk of an accident.
- If necessary , you can stop the recall process
by pressing the
!OF FI button or any memory
button.
60
Adjusting the front passenger's seat in the Infotainment system
Applies to: vehicles with memory function
The driver con move the front passenger 's seat
into various positions.
Adjusting the front passenger's seat from
the driver's seat
• Select: the ICARI function button> Car systems
control button > Vehicle settings > Seats >
Front passenger's seat> Adjust seat position .
• You can now adjust the front passenger's seat
using the driver's seat buttons
~ page 54,
fig. 60.
Align with driver's seat
• To transfer the settings from the driver's seat
to the front passenger's seat, select: the
!CAR I
function button > Car systems control button >
Vehicle settings > Seats > Front passenger 's
seat > Align with driver's seat.
• Press and hold the control knob until the ad­
justing process is complete.
(D Tips
The lumbar support and upper thigh support
settings are not transferred when aligning
the front passenger's seat with the driver's
seat.

lL t:0 ....
"' ......
"' .... 0 0 :c ' 12 volt sockets
Applies to: veh icles with sockets
Fig . 70 Side compartment in luggag e compartment: 12
volt socket•
Fig. 71 Example of a rear center console: 12 volt socket
The 12-volt sockets can be used for electrical ac­
cessories. The power consumption at the outlet
must not exceed 120 watts.
There is an additional 12 volt socket in the center
console
¢page 63, fig . 75.
_&, WARNING
The sockets and the electrical accessories con­
nected to them only funct ion when the igni­
tion is switched on. Incorrect usage can lead
to ser ious injuries or burns. To reduce the risk
of injuries, never leave children unattended i n
the vehicle with the vehicle key.
(D Note
- Never connect any accessories that provide
power (such as solar panels or battery
charger for the vehicle battery) to the ciga­
rette lighter. They can damage the vehicle
electrical system .
- To reduce the risk of damage to the sockets,
on ly use plugs that fit correct ly .
Seats and storage
115 volt socket
Applies to: vehicles with 115 volt socket
T he 115 volt socket can be used when the igni­
tion is switched on
¢ .&. . When you push the con­
nector all the way into the socket, the child safe­
ty mechanism re leases and current flows through
the socket.
Connectable devices
Electrica l devices can be connected to the 115
volt socket in the vehicle. The device connected
to the socket must not use more than 150 watts
of power (300 watts peak power). Check the
power usage of the connected device on the type
label.
LED on the socket
-The socket is ready for use when the LED is
green.
- There is a malfunction if the LED is blinking red.
The socket will switch off automatically due to
overcurrent or overheating. The socket will
switch on again automatically after a cool­
down period. Any devices that are connected
and sw itched on w ill act ivate aga in automati­
cally¢ .&.
_&, WARNING
- The sockets and the electrical accessories
connec ted to them only f unction when the
ignit ion is switched on. Incorrect usage can
lead to serious injuries o r burns. To reduce
the risk of injuries, never leave children un­
attended in the vehicle with the vehicle key.
- If devices or connectors that are heavy (for
example a power supply unit) are attached
d ire ctly to the socket, the holder can be­
come damaged, wh ich increases the risk of
injury.
-To reduce the risk of fatal injury, store all
connected devices securely when driving so
that they do not
move around inside the ve­
h icle when braking or if involved a crash.
- To reduce the risk of fatal injury, do not spill
any fluids on the socket. Should any mo is-
ture enter the socket, make sure that it has
~
61

lL t:0 ....
"' ......
"' .... 0 0 :c ' Folding table in the center console
Applies to: ve hicles with fold ing tab le in the center console
The folding table is stored in the front area of
the center console.
Fi g. 73 Rea r center console : ope ning the folding tab le
F ig. 74 Rea r ce nter console : fold ing tab le in clined pos ition
Opening
"" Pull the handle @towa rd the rear r=;, fig. 73.
The folding table extends out partially by i tself
¢ &, .
... Pull the folding table up until it locks into place
® ·
... Fold the tabletop back and down ©-
Storing
... Release the tabletop @to fold it back .
... You can now move the folding table vertica lly
back into its original position.
.&_ WARNING
- Do not open the folding table wh ile driving.
Open ing the folding table wh ile driving in­
creases the risk of injury in the event of a
co llision or sudden brak ing.
- To reduce the risk of pinch ing, open and
close the fo ld ing table carefully and in a
contro lled manner.
S eats and storag e
Storage
Cup holders
Fig. 75 Cente r conso le : front cup holders
F ig. 76 Section o f the rear bench seat: cup hol der in rear
center console
Front cup holders
"" Tap on the cove r to open the cup holders
r=;, fig. 75.
Cup holde rs in the rear center console
.. Tap on the front strip to open the cup holders.
• Set your beve rage in the holder .
• To close the cup holder , fo ld the cover back un-
til it clicks into place .
In veh icles with a full-length center console in
the rear, the cup holder is located at @
¢page 62, fig. 72 .
.&_ WARNING
-
-Do not put any hot beverages in the cup
holder while t he vehi cle is moving . Hot bev ­
erages could spill, which can cause injury.
- Do not use any breakab le beverage contain­
ers (for example, made out of g lass or por­
celain). Yo u could be injured by them in the
event of an accident .
...,
63

Seats and storage
(D Note
Beverage containers in the cup holders should
always have a lid. If not, beverages could spill
and cause damage to vehicle equipment, such
electronics or seat covers.
Cooled glove compartment
The cooled glove compartment only functions
when the A/C system is switched on.
Fig. 77 Glove compar tment: switching cooling mode on/
off
.. Turn the knob @counter-clockwise to switch
the cooling on. The symbols on the knob indi­
cate the correct position.
.. Turn the knob @clockwise to switch the cool-
ing off .
The glove compartment cooling mode only func­
tions when the vehicle A/C system is switched on.
If the heating is switched on, switching the glove
compartment cooling mode off is recommended.
A WARNING
-
Always leave the lid on the glove compart­
ment cover closed while driving to reduce the
risk of injury.
(D Tips
The glove compartment can be locked using
the mechanical key.
Additional storage compartments
You will find a range of storage compartments
and hold ers at different locations in the vehicle.
- Compartments in the doors
64
- Net in the front passenger footwell
- Glasses holder in the headliner (near the rear-
view mirror)
- Storage compartments under the center arm­
rest
- Compartments* on the backrests of the front
seats
- Garment hooks above the rear doors
- Compartment behind the rear center armrest
(on vehicles without a pass-through* or refrig­
erator*)
- Cell phone holder* in the right rear door
- Bag hooks* in the luggage compartment
A WARNING
-When driving, do not leave any hard objects
on the rear window shelf or allow your pet
to sit on the shelf. They could become a haz­
ard for vehicle occupants in the event of
sudden braking or a crash.
- Any articles of clothing that you have hung
up must not interfere with the driver's view .
The coat hooks are designed only for light­
weight clothing. Never hang any clothing
with hard, pointed or heavy objects in the
pockets on the coat hooks. During sudden
braking or in an accident
-especially if the
airbag is deployed
-these objects could in­
jure any passengers inside the vehicle .
- To reduce the risk of personal injury in an
accident or sudden stop, always keep the
glove compartment closed while driving.
- Read and follow all WARNINGS
~ page 245, Important safety instructions
on the side airbag system.
- Hang clothes in such a way that they do not
impair the driver's vision.
- The coat hooks must only be used for light­
weight clothing. Do not leave any heavy or
sharp edged objects in the pockets which
may interfere with the side curtain airbag
deployment and can cause personal injury in
a crash.
- Do not use coat hangers for hanging cloth­
ing on the coat hooks as this can interfere
with proper deployment of the side curtain
airbags in an accident.

lL t:0 ....
"" ......
"" .... 0 0 :c ' -Do not hang heavy objects on the coat
hooks, as they could cause personal injury in
a sudden stop.
CD Note
Objects on the rear shelf that rub against the
rear window can damage the rear window de­
fogger wires.
@ Tips
- A vent slot is located between the shelf and
the rear window. Do not b lock the vent with
any items you may place on the rear window
shelf.
- Do not p lace bulky items on the rear window
shelf as they could restr ict or block the driv­
er's vision in the rear view mirror.
Roof rack
A ppl ies to: ve hicles with roof rac k
Fig . 78 Attachment po ints for the roof rack
If luggage or cargo is to be carried on the roof,
you must observe the following:
- Only a specially designed roof rack may be used
on your veh icle . These roof racks are the basis
for a complete roof rack system. Additional at­
tachments/carrier systems are necessary to
transport luggage and sports equipment . We
recommend roof racks and attachments from
the Audi Genu ine Accessor ies program .
- When installing the roof rack, make sure that it
is mounted only at the designated points on
the roof
c::> fig . 78 .
-The permissible roof load for your vehicle is
220 lbs (100 kg) . The roof load is the total of
the weight of the roof rack, the attachments and the cargo you are carrying. However, you
S eats and storag e
must also note the pe rmitted load of the carri ­
er system being used . For the permitted axle
load and the permitted tota l vehicle weight,
see
Q page 333.
A WARNING
-Follow the installation instruct ions provided
wit h the roof rack system . If you do not se­
cure the roof rack system and objects on the
roof correctly, they could come loose from
the vehicle and ca use a n accident.
- Using a roof rack system increases the r isk
of an acc iden t, because it changes the d riv­
ing characte risti cs by shifting the center of
g ravi ty and/or the increasing the sur face
area exposed to wind. Adapt your driving
and speed to the current cond itions.
CD Note
Make su re that the open luggage compart­
ment lid and the tilt ing/slid ing sun roof * do
not come into contact with objects on the
roof.
@ For the sake of the environment
Your vehicle will use more fue l due to the in­
creased wind resistance. So remove the roof rack after using it .
Luggage compartment
General information
WARNING
Read and fo llow the important safety preca u­
tions in
Q page 213, Storing cargo correctly .
65