Light AUDI Q2 2021 Owner´s Manual

Audi smartphone interface

CO

rN
IV
rN
t-H
o <
Audi smartphone
interface
Setting
upx)

Applies to: vehicles with Audi smartphone interface

You
can connect your smartphone to the MMI
system via the Audi smartphone interface. Some
of the content
on
your smartphone is displayed
in an optimised
screen
format on the infotain­
ment display and can be operated via the MMI
control console.
Important
The vehicle must be stationary, and the ignition
must be switched on.
iPhone 5 or later with Lightning connector and
operating system iOS 7.1.2 or higher or:
Smartphone with Android Auto app and operat­
ing system Android 5.0 Lollipop or later.
• Connect your smartphone to the Audi music in­
terface
opage
241 via a USB adapter

^> page
240, Fig. 196.

•
Select and confirm Activate Apple CarPlay or
Activate Android Auto now.

•
Follow the instructions given by the system.
• Please note any system queries on your smart­

phone.

If
you
decline the use of Apple CarPlay or Android
Auto the first time you connect your smartphone,
you can start the Audi smartphone interface at a
later time via the connection manager.

•
SeLect:
|MENU|
button
>
Audi smartphone in­
terface > Switch to connection manager.

•
Connect your smartphone to the Audi music in­
terface via a USB adapter
^>page
240, Fig. 196.

*•
Select and confirm Audi smartphone in Con­
nection manager
<3>page
257. You can select
your smartphone from the list of devices al­
ready connected
^page
258.

•
Follow the instructions given by the system.
© CAUTION
Please always observe the information
=>®
in
Wi-Fi hotspot on page 202.
- The functions you can use depend on a num­
ber of factors including:
-The brand of your smartphone
-The operating system version of your
smartphone
- The software version of the app in use
- The USB adapter/cable and the correct
connection
- Your mobile network/service provider
- The individual settings on your smart­
phone
- One or several of the factors listed above
can result in your smartphone being incom­
patible with the Audi smartphone interface.
We regret that it is not possible to guaran­
tee compatibility for all types of smart­

phone.
For further information and support,
please refer to the operating manual of your
smartphone or contact its manufacturer.
- If the smartphone you have connected has a
voice controL feature, you can control your
smartphone using the external speech
con­

trol system
^>page
170.
-The menu language displayed on the MMI is
based on the setting on your smartphone.
- The time displayed on the MMI is based on
the setting on your smartphone.
- Some of the MMI functions are not available
while an Apple CarPlay or Android Auto
con­

nection is active.
- You cannot use mobile devices via Bluetooth
when an Apple CarPlay connection is active.
- If
you
have inserted your own mini SIM card
in the SIM card reader* for making phone

calls,
the SIM card will be used exclusively
for
a
data connection when the Audi smart­
phone interface and the car phone function*

^page
172 are active.

x)
Not available in all markets.
253

Safe driving
Safe driving
General notes
Safety is the first priority
The safety features in your vehicle are harmon­
ised to provide you and your passengers with the
best possible protection in accident situations.
However, they can only be effective if you and
your passengers sit in the correct position and
adjust and use the safety equipment properly.
For these reasons, this chapter explains why
these safety features are so important, how they
can protect you, what you need to remember
when using them, and
how
you and your passen­
gers can gain the most benefit from them. There
are also a number of important safety warnings
which you and your passengers should always ob­
serve in order to minimise the risk of injury.
WARNING
- The information in this chapter is important
for the driver of the vehicle and all passen­

gers.
The other chapters in this manual

(and,
where applicable, in the other litera­
ture supplied with the vehicle) contain fur­
ther important notes which you should read
and observe for your own safety and that of
your passengers.
- Ensure that the complete vehicle wallet is
always in the vehicle. This is especially im­
portant when you lend or sell the vehicle to
others.

CO

<
O
rN
iv
rN
i—i
o < 00
Before every trip
The driver is responsible for the safety of the
passengers and the safe operation of the vehicle
at all times.

For
your own safety and the safety of your pas­
sengers, always note the following points before
every trip:

•
Make sure that all lights and turn signals are
working properly.

•
Check the tyre pressures.

•
Make sure that all windows are clean and give
good visibility to the outside.

•
Secure all luggage and other items carefully

•=>
page 272.
• Make sure that no objects can interfere with
the pedals.

•
Adjust the front seat, head restraint and mir­
rors correctly.
• Applies to: adjustable head restraints: Make
sure that the front passenger's head restraint is
adjusted to the correct position.
• Applies to: adjustable head restraints: Make
sure that the head restraints for the rear pas­
sengers are in the fully raised position.

•
Make sure that children are protected with suit­
able safety seats and properly worn seat belts

•=>
page 267.

•
Sit in the correct position in your seat. Make
sure
that
your passengers are sitting in the cor­
rect positions
^>page
58.

•
Fasten your seat belt correctly. Make sure that
your passengers do the same
^page
275.
What factors can impair your safety?
Safety on the road is directly related to
how
you
drive, and can also be affected by the passengers
in the vehicle.
• The driver is responsible for the safety of the
vehicle and all its occupants. If your ability to
drive is impaired in any way, you endanger
yourself and other road users
,=>^.
Therefore:
• Do not let yourself be distracted by passengers
or by using a mobile phone, etc.

•
Never drive when your driving ability is im­
paired (by medication, alcohol, drugs, etc.).
• Obey all traffic regulations and speed limits
and always maintain a safe distance to the
vehi­

cle in front.

•
Always adjust your speed to suit the
road,
traf­
fic and weather conditions.

•
Take frequent breaks on long trips. Do not drive
for more than two hours without a stop.

•
If possible, avoid driving when you are tired or

stressed.
•
263

Safe driving

CO
<
O
rN
iv
rN
•-i

00
Correct sitting positions
Correct driving position

The
correct driving position is important for safe
driving.
25cm

Fig.
208 Adjust seat and sit in correct position
For your own safety, and to reduce the risk of in­
jury in the event of an accident, we recommend
the following driving position.

•
Adjust the driver's seat and steering wheel so
there is a distance of at least 25 cm between
your breastbone and the centre of the steering

wheel
o>F/g.
208.

•
Adjust the height and fore/aft position of the
driver's seat so that you are able to press the
pedals to the floor without fully straightening
your legs
oA.

•
Adjust the backrest to an upright position so
that your back remains in contact with the up­
holstery.

*•
Adjust the longitudinal position of the steering
wheel so that your arms are slightly bent and
you can read the dials and instruments easily.

•
Make sure that you can comfortably reach the
top of the steering wheel.

•
AppLies to adjustable head restraints: Adjust
the head restraint so that the top of the head
restraint is
level
with the top of your head. If
this is not possible, try to adjust the head re­
straint as near as possible to this position.

•
Fasten your seat belt correctly
^>page
275.

•
Keep both feet in the footwell so that you are in
full controL of the vehicle at all times.
For detailed information on how to adjust the
driver's seat, see
^>page
58, Front seats.
A WARNING
A driver who is not sitting in the correct
posi­

tion or who is not wearing a seat belt can be
fatally injured
if
the airbag is triggered.
- Adjust the driver's seat and steering wheel
so there is a distance of at least 25 cm be­
tween your breastbone and the centre of the
steering wheel
^>Fig.
208.
-While driving, always hold the steering
wheel with both hands on the outside of the
rim at about the 9 o'clock and 3 o'clock
posi­

tion.
This reduces the risk of injury if the
driver's airbag inflates.
- Never hold the steering wheel at the 12
o'clock position, or with your hands inside
the rim or on the steering wheel hub. This
could result in serious injuries to the arms,
hands and head if the driver's airbag in­

flates.

- To reduce any risk of injury to the driver dur­
ing a sudden brake application or in an
acci­

dent, never drive with the backrest tilted
too far back. The airbag system and seat
belts can only provide proper protection
when the backrest is in an upright position
and the driver is wearing the seat belt in the
correct position. The further the backrest is
tilted back, the greater the risk of injury due
to incorrect positioning of the belt webbing
or an incorrect sitting position.
- Adjust the head restraint properly so that it
can give maximum protection.
Correct position for the front passenger

The
front seat passenger must sit at least 25 cm
away from the dash panel so that the airbag has
enough room to inflate and give maximum pro­
tection in an accident.
For your own safety and to reduce the risk of in­
jury in the event of
an
accident, we recommend
adjusting the front passenger's seat as follows:

•
Adjust the backrest to an upright position so
that your back remains in contact with the up­
holstery.

•
Adjust the head restraint so that the top of the
head restraint is level with the top of your
265

Safe driving

•
Distribute the load evenly in the luggage com­
partment.

•
Place heavy items as far forward as possible in
the luggage compartment and secure them
properly
<^>Fig.
214.

•
Secure the load with the stretch net* or with
non-elastic straps secured to the fastening
rings
^>page
62.
© CAUTION
A WARNING
- Loose items in the luggage compartment
are a safety hazard: they can move suddenly
and impair the handling of the vehicLe as a
result of the change in weight distribution.
- In an accident or a sudden manoeuvre, loose
objects in the passenger compartment can
be flung forward - risk of injury! Always
stow objects safely in the luggage compart­
ment and secure them on the fastening

rings.
Use suitable securing straps, particu­
larly when transporting heavy objects.
- Transporting heavy objects may affect the
vehicle's handling by shifting the centre of
gravity - this could cause an accident. Take
extra care when driving and adjust your
speed accordingly.
- Never exceed the maximum axle loads or
the maximum gross weight for the vehicLe

^>page
342. Exceeding the permitted axle
loads or gross weight Limit can affect the ve­
hicle's handling characteristics, and increase
the risk of accidents, personal injuries or
damage to the vehicle.
- Never leave your vehicLe unattended when
the boot lid is open. Children could climb in­
to the boot and close the boot lid from the

inside.
In this case the child would be un­
able to get out of the vehicle without help.
This could have fatal consequences.
- Never allow children to play in or around the
vehicle. Always close and lock the boot lid
and all the doors when you leave the
vehi­

cle.

- Never let passengers ride in the luggage
compartment. All occupants must be prop­
erly restrained by the seat belts at all times

•=>
page
27'5.

Make sure that no hard objects chafe against
the wires of the heating element in the rear
window and damage them.
©
Note

- The tyre pressure must be adjusted accord­
ing to the load the vehicle is carrying

<^>page
307.
- Air circulation in the vehicle helps reduce
fogging of the windows. Used air escapes
through ventilation slots in the rear of the
vehicle. Make sure that these ventilation
slots are not obstructed.
- Suitable belts for securing loads to the fas­
tening rings* are commercially available.
Fastening rings
Unsecured loads are a hazard to all vehicle occu­
pants.
There are fastening rings in the luggage com­
partment which can be used to secure luggage
and other objects
^>page
62.

•
Use the fastening rings to secure items safely
in the luggage compartment
<=> A.

During a collision or an accident, even small and
light objects can possess so much energy that
they can cause very severe injuries. The amount
of this "kinetic energy" depends on the speed of
the vehicLe and the weight of the object. The
most significant factor, however, is the speed of
the vehicLe.
For example: an object weighing 4.5 kg is lying
unsecured in the vehicle. During a frontal
colli­

sion at a speed of 50 km/h, this object generates
a force corresponding to 20 times its weight.
That means that the effective weight of the ob­
ject increases to about 90 kg. You can imagine
the severity of the injuries which might be sus­
tained if this "projectile" strikes an occupant as it
flies through the passenger compartment. •
00
273

Seat belts

CO

<
O
rN
iv
rN
•-i

00
A WARNING
During pregnancy, women should especially
make sure to wear the lap portion of the seat
belt as low as possible across the hips so that
there is no pressure on the stomach.
Seat belt height adjustment
Applies to: vehicles with seat belt height adjustment
Seat belt height adjusters can be used to adjust
the height of the shoulder portion of the seat

belt.

V:

Fig.
224 Belt height adjustment - top guide fitting
The shoulder section of the belt should be fitted
across the centre of the collar bone close to the
body
^^
in Adjusting the seat belts on
page 278.

*•
Take hold of the guide fitting and slide it up­
wards
@,
or

•
Compress the adjuster
(T)
and slide the guide
fitting downwards
@.

•
After adjusting, pull the shoulder belt sharply
to check that the catch on the guide fitting is
engaged securely.

(J)
Nol

- It is also possible to adjust the height of the
front seats to obtain the best position for
the front seat belts.
-The shoulder section of the belt should be
fitted across the centre of the collar bone
close to the body. The lap belt must be worn
tightly over the hips. It must not be
posi­

tioned over the stomach. Pull the belt tight
if necessary to take up any slack.
Taking off the seat belts

The
red button releases the belt from the buckle.

Fig.
225 The latch plate of the belt springs out of the
buckle

•
Press the red button in the seat belt buckle.
The latch plate will spring out of the buckle.

•
Guide the belt back by hand so that it is taken
up by the retractor.
Belt tensioners

Reversible
belt tensioners*
The following functions are available when seat
belts with reversible belt tensioners are buckled:
- The seat belts can be tensioned reversibly in
certain situations
^>page
120.
- The seat belts can be also be tensioned reversi­
bly in light collisions.
Pyrotechnic belt tensioners*
Seat belts with pyrotechnic belt tensioners are
tensioned automatically in severe collisions, de­
pending on the circumstances. This helps to re­
duce the forward motion of the occupants.

A,
WARNING
- False activation of the
belttensioner
is pos­

sible.

- Any work on the tensioner system or remov­
al and installation of system components
for other repairs must be performed by a
qualified workshop.
- The pyrotechnic system can only be activa­
ted once. If the pyrotechnic belt tensioners
have been activated at any time, the system
must be replaced.
279

Airbag system
lead to faults in the system. Repairs or any
other work on the front doors must there­
fore always be carried out by
a
qualified
workshop.
- The built-in coat hooks* should only be used
for lightweight clothing. Do not leave any
heavy or sharp-edged objects in the pockets.
- Do not apply excessive force to the sides of
the backrests (such as hard knocks or kicks),
as this could damage parts of the system.
The side airbags could then fail to operate
when required.
- If
you
intend to fit protective covers over
the seats, these must be of the specific type
approved for use on Audi seats with side air-

bags.
Conventional seat covers would ob­
struct the side airbag when it inflates out of
the backrest, and seriously reduce the air-
bag's effectiveness.
- Any damage to the original seat upholstery
or around the seams of the side airbag units
must be repaired immediately by a qualified
workshop.
- Any work involving the side airbag system or
removal and installation of the airbag com­
ponents for other repairs (such as repairs to
the seats) must always be performed by a
qualified workshop. Otherwise the airbag
system may fail to work properly.
© Note
All the other airbags in the car will remain
functional if the front passenger's airbag has
been deactivated.
Head-protection airbags
Description of head-protection airbags



Fig.
234 Location of head-protection airbags above the
doors (example)
The head-protection airbags are located above
the doors on the left and right sides of the
vehi­

cle.
The locations of the airbags are marked with
the word "AIRBAG".
In conjunction with the three-point seat belts
and side airbags, the head-protection airbags
give the occupants additional protection against
head and neck injuries in a severe side collision

•=>
A in Important safety notes on the head-pro­
tection airbags on page 287.
Together with other design features (including
cross-braces in the seats and the overall strength
of the body structure), the head-protection and
side airbag system offers an effective further im­
provement to occupant protection in side im­

pacts.

How the head-protection airbags work
When fully inflated, the airbags reduce the risk
of head or chest injury in a side collision.

jfW

Fig.
235 Head-protection airbags in inflated condition (ex­
ample) •
286

Airbag system

CO

< o rN
iv
rN
•-i

•H
00
The head-protection airbag system is triggered in
certain types of side collision
^>Fig.
235. Further
airbag systems may also be triggered, depending
on the circumstances.
When the system is triggered, the airbag fills
with a propellant gas and covers the entire area
in front of the side windows, including the door
pillars. The head-protection airbag inflates to
soften the impact if an occupant strikes parts of
the interior or objects outside the vehicLe with
their head. By reducing the head impact and re­
straining uncontrolled movement of the head,
the airbag also reduces the forces acting on the
neck.
In order to provide the desired extra protection in
an accident, the airbags have to inflate extremely
rapidly (within fractions of
a
second).
Important safety notes on the head-
protection airbags

There
are a number of safety points concerning
the airbag system which you should remember.
This will help to reduce the risk of injury in an ac­
cident.
A WARNING
- It is important to ensure that the area
around the openings for the head-protec­
tion airbags remains unobstructed at all

times,
so that the airbags can infLate prop­
erly if needed.
- The built-in coat hooks should only be used
for lightweight clothing. Do not leave any
heavy or sharp-edged objects in the pockets.
When using the coat hooks, do not hang the
clothes on coat hangers.
- The space between the passengers and the
head-protection airbags must never be oc­
cupied by children, other passengers or

pets.
Passengers should never lean out or
put
a
hand
or
arm out of the window while
the vehicle is in motion.
- Do not move the sun visors out to cover the
side windows if there is anything attached
to them (such as pens or
a
garage door
opener). These objects could cause injury if
the head-protection airbag is triggered.
The sensors for the airbags are Located in
the front doors. You must therefore not
make any modifications to the doors or door
trim (e.g. retrofitting loudspeakers),
as
this
could impair the function of the side air-

bags.
Any damage to the front doors could
Lead to faults in the system. Repairs or any
other work on the front doors must there­
fore always be carried out by
a
qualified
workshop.
Sun blinds fitted on the rear doors must not
obstruct or impair the airbags in any way.
If unsuitable accessories are installed near
the head-protection airbag, the protection
afforded by the airbag can be seriously im­
paired if the system is triggered. When the
head-protection airbag opens, parts of
these accessories could be thrown into the
vehicle and injure passengers
^>page
340.
Any work involving the head-protection air-

bags,
or removal and installation of the air-
bag components for other repairs (such as
repairs to the roof liner), must always be
performed by
a
qualified workshop. Other­
wise the airbag system may fail to work
properly.
287

Airbag system
Deactivating the front
passenger's airbag
Applies to: vehicles with key-operated switch for front pas­
senger's airbag
If
an
airbag has been deactivated, it should be
reactivated as soon as possible so that it can
continue to give the required protection.
••

-,
CG

^

Fig.
236 Glove box: Key-operated switch for deactivating
front passenger's airbag

r
;•••;

:
m

^
hu
ON®

Fig.
237 Headliner: Warning lamp lights up when pas­
senger's airbag is deactivated
If
you
have no alternative but to install
a
rear­

ward-facing child seat on the front passenger's
seat you must deactivate the front passenger's
airbag beforehand.
We recommend that child seats should be fitted
on the rear seat so that the front passenger's air-
bag can remain functional and provide protection
in an accident
^>page
267.

•
To deactivate the front passenger's airbag, use
the key to turn the key-operated switch to OFF

=*
Fig.
236.

•
The front passenger's airbag can be reactivated
by turning the key to position ON.
Monitoring of airbag system
The indicator Lamp
Q ^>page
31 will light up for
a few seconds every time the ignition is switched

on.

If the front passenger's airbag has been deactiva­

ted,
the indicator Lamp "PASSENGER AIR BAG
OFF ft" or
"9K
AIR BAG
OFF ^"
will light up
constantly as a reminder
^>Fig.
237.

A WARNING

- If
you
have no alternative but to install a
rearward-facing child seat on the front pas­
senger's seat, the front passenger's airbag
must be deactivated beforehand. Potential­
ly fatal injuries to the child can result if the
front passenger's airbag is not deactivated

•=>
page 267
- If
you
have deactivated the front passeng­
er's airbag, reactivate it as soon as the child
seat is no longer needed so that the airbag
can continue to give the required protec­

tion.

- It is the driver's responsibility to ensure that
the key-operated switch is set to the correct

position.

288

Checking and topping up fluids

CO

<
O
rN
iv
rN
t-H
o < 00
Checking and topping up
fluids
Fuel
Petrol grade
Applies to: vehicles with petrol engine

The
correct grade of petrol is listed inside the
fuel tank flap.
The vehicle is equipped with a catalytic converter
and must only be run on unleaded petrol. Petrol
must be sulphur-free and must comply with the
EN 228 standard. You can fuel your vehicle with
fuels containing a maximum of 10%
ethanol

(E10). The petrol grades have different octane
ratings (RON).
The following headings relate to the sticker on
the inside of your vehicle's tank flap:
Unleaded fuel only RON/ROZ
95
Super,
Premium or
min.
RON/ROZ 91 Normal
The use of premium petrol (95 RON) is recom­

mended.
If
that
type of fuel is not available,
reg­

ular petrol (RON 91) can be used with a slight
loss of power.
Unleaded fuel only, min. RON/ROZ
95

Super, Premium
Premium petrol (at least 95 RON) must be used.
If premium petrol is not available, the engine can
be run on regular petrol with 91 RON as an
emer­

gency measure. In this case only use moderate
engine speeds and a light throttle. Fill up with
premium or Super Plus petrol as soon as possi­

ble.

Unleaded fuel only RON/ROZ 98 Super Plus
or min. RON/ROZ 95 Super, Premium
The use of Super Plus petrol (98 RON) is recom­

mended.
If
that
type of fuel is not available, pre­
mium petrol (RON 95) can be used with a slight
loss of power.
If premium petrol is not available, the engine can
be run on regular petrol with 91 RON as an
emer­

gency measure. In this case only use moderate
engine speeds and a light throttle. Fill up with
premium or Super Plus petrol as soon as possi­

ble.

© CAUTION
- Do
NOT fuel
your vehicle with
high-ethanol

fuel blends (e.g. E50 or E85). This will dam­
age the fuel system.
- just one tank of leaded fuel or fuel with
metallic additives will permanently impair
the efficiency of the catalytic converter.
- You should use only petrol additives which
have been approved by Audi. Additives with
so-called octane boosters or antiknock
addi­

tives can contain metallic additives that
cause significant damage to the engine and
the catalytic converter. Do not use such ad­
ditives.
- Metal-based fuels, which can be identified
from the marking on the fuel dispenser,
must not be used. LRP fuel (lead replace­
ment petrol) also contains high concentra­
tions of metallic additive. Risk of engine
damage!
- High engine speed and full throttle can
damage the engine when using petrol with
an octane rating lower than the correct
grade for the engine.
- You can use higher octane fuel than your en­
gine requires.
- In countries where sulphur-free fuel is not
available, you may use low-sulphur fuel in­

stead.

Diesel fuel
Applies to: vehicles with diesel engine
Please note the information on the inside of the
fuel tank flap.
The use of sulphur-free diesel complying with
the EN 590 standard is recommended.
Diesel can thicken at very low temperatures,
which can result in problems starting the engine
or prevent the engine from running smoothly.
For this reason, filling stations in some countries
offer winter-grade diesel fuel during the cold
289

Checking and topping up fluids
Refilling AdBlue from a canister
Applies to: vehicles with selective catalytic reduction

#

Fig.
242 Canister with screw-on hose
• Take the cap off the refill canister
o^/n
Prep­
arations on page 293,
<=>(T)
in Preparations on
page 293.

•
Screw the end of the hose (î) clockwise onto
the opening on the canister®.

•
Remove the cap
@
from the other end of the
hose®.

•
Fit the end of the hose (2) onto the filler neck
on the vehicle and turn clockwise as far as the
stop to secure.
• Lift the canister and then tilt it. Keep it tilted
until empty or until no more fluid runs into the
tank.

•
Remove the canister and screw the tank cap
back on
^>page
294, After refilling.
CAUTIO
Use only refill canisters of the correct type ap­
proved for your vehicle. AdBlue may Leak out
if
you
use another system.
© Note
- Your qualified workshop can tell you which
refill canisters are approved
for
your
vehi­

cle.

- Approved refill canisters contain about 5 li­
tres of AdBlue.
Refilling AdBlue from a bottle
Applies to: vehicles with selective catalytic reduction

•
Take the cap off the refill bottle
<=>^
in Prepa­
rations on page 293,
•=>(?)
in Preparations on
page 293.

•
Screw the bottle clockwise onto the filler neck
as far as it will go.

•
To empty the bottle, lightly press the bottom
of the bottle. Keep pressing the bottom of the
bottle until the bottle is empty, or until no
more fluid runs into the tank.

•
Remove the bottle and screw the tank cap back
on
<=>page
294, After refilling.
(J) CAUTION
Use only refill bottles of the correct type ap­
proved for your vehicle. AdBlue may leak out
if
you
use another system.
- Refill bottles are available from qualified
workshops.
- Approved refill bottles contain about 1.9 Li­
tres of AdBlue.
After refilling
Applies to: vehicles with selective catalytic reduction
Closing the filler neck

•
Screw the AdBlue cap clockwise onto the filler
neck until the AdBlue cap clicks audibly
•=> /\
in
Preparations on page 293,
^>(T)in
Prepara­
tions on page 293.

•
Press the left side of the flap to close it (you
should hear it click into place).
After refilling
The vehicle must be driven so that the system
can detect the AdBlue which has been added.
This process can take several minutes.
• If the AdBlue tank had run dry and a range of
0 km was shown on the display, switch on the
ignition for approx. 30 seconds before starting
the engine.
© Note
AdBlue can freeze in the tank at very Low
tem­

peratures. In this case, the system will not
detect AdBlue when you refill and will contin­
ue to indicate a Low
AdBLue
Level. The mes­
sage will disappear as soon as the tank has

thawed.

294