mmi AUDI Q2 2021 Owner´s Manual

Multi Media Interface
emergency vehicles) clearly - failure to do so
could result in an accident.

CO

<
o
rN
iv
rN
t-H
o
< 00

©
Note
If the engine is switched off and the vehicle
battery charge level is low, the MMI system
will be switched off automatically.
Infotainment display
Switching on/off
- To switch on/off manually: Press the
^
but­
ton
@ tapage
10, Fig. 2.
You can operate certain functions using the MMI
ON/OFF button with joystick function when the
MMI is switched on but the display is switched
off
o
page 152.
Notes on the illustrations of the displays

The
display type depends on the equipment
fit­

ted in your vehicle.
87.6 MHz

88./
MHz
90.0 MHz
96.6 MHz

Fig.
142 Display
type
A
87.6 MHz
88.7 MHz

ij
90.0 MHz

r
90.5 MHz
91.5 MHz
96.6 MHz

1

©^

1

FM

L 1

3
i
i

Fig.
143 Display type B
Additional content (e.g. album covers, maps)
may be shown on display type
B®
oF/'g.
143. As
the other content is almost identical for both dis­
play types, the illustrations in this Owner's
Man­

ual primarily show display type A, depending on
the topic.
How to use the MMI
Selecting and confirming a function
87.6 MHz
88.7 MHz
90.0 MHz
90.5 MHz
91.5 MHz
96.6 MHz

Fig.
144 How to use the rotary pushbutton
Selecting and confirming a function in a
menu/list
• To select a function: Turn the rotary pushbut­
ton®
^>Fig.
144 to the desired function (e.g.
setting a frequency).

•
To confirm the selection: Press the rotary
pushbutton
(T)
OFig.
144.
Returning to the previous function level

•
Press the
I
BACK
|
button
® *>page
152,
Fig. 140.
Calling up the main menu/menu

^w
J
x,.
•'.w
•^£j: •

V."

.
F

Fig.
145
Illustrât

E/Car

(TM
Sound

^%
\
* VlKadiol •
*
M
J
Q
Mfedia

II
Telephone

on:
Main menu
• •

.

153

Multi Media Interface
Calling up the main menu

•
Press the button marked
[MENU
|(g)
tapage
152, Fig. 140. The MMI menus (e.g. Ra­
dio) will be displayed
of/g.
145. You can then
use the rotary pushbutton to select and
con­

firm a function.
Calling up a menu directly

•
Press the corresponding button to call up me­
nus
directly (§) ^>page
152, Fig. 140 in the di­
rection of the menu you require (e.g.
I
RADIO
|),

You can then use the rotary pushbutton to se­
lect and confirm a function.
Options menu: You can use the options menu to
select and confirm specific functions for individu­
al menu items (e.g. Radio) and to make changes
to settings.
Important: The symbol for the options menu
L±|

must be shown on the infotainment display

^>Fig.
146. You can then use the rotary pushbut­
ton to select and confirm a function.
To call up/close the options menu: Press the
right control button
^>Fig.
146. You can then use
the rotary pushbutton to select and confirm a

function.

Calling up the selection/options menu with
the control buttons
90.5 MHz

91.5
MHz
96.6 MHz
r

Fig.
146 Control buttons on MMI control console
Selection menu: You can use the selection menu
to call up further functions for individual menu
items (e.g. Radio).
Important: The symbol for the selection menu
must be shown on the infotainment display

ï>Fig.
146.
To call up/close the selection menu: Press the
left control button
^>Fig.
146. You can then use
the rotary pushbutton to select and confirm a

function.

Notes on path descriptions

The
path descriptions in this manual
show
you at
a glance how to call up the menu you require
along with its settings and functions.
Example of a path description

•
Select:
I
RADIO|
button > left control button >

FM.

Using a path description
• Press the
I
RADIO
I
button.

•
Press the left control button.

•
Turn the rotary pushbutton to FM in the menu.

•
Press the rotary pushbutton to confirm FM.

•
The function you have selected and confirmed
is now set. In this example, the FM waveband is

selected.

154

Multi Media Interface
MMI touch
MMI touch pad
Applies to: vehicles with MMI touch

You
can enter data on the MMI touch pad with
the help of handwriting recognition.

(•/-wrmgolstadt,
Mùhlhausen,
85049

(•)
(D)
Miinchsmiinster,
85126

® (D)
Petershausen,
Muhldorf, 85238

Fig.
147 Entering a navigation destination via the MMI
touch pad
The MMI touch pad is located between the
con­

troL buttons
^>Fig.
147.
Entering letters, numbers and characters
Applies to: vehicles with MMI touch

The
MMI touch pad enables information to be
entered with the help of handwriting recogni­
tion.
Important: A function requiring text or number
input must be active and the
symbol (T)

oF/g.
148 must be shown on the display.
- Basic principle: Use your finger to write an
indi­

vidual letter (capital or small letters) or num­
bers/symbols on the MMI touch pad. If the sys­
tem positively identifies a character, it will be
shown on the infotainment display
(Î)
^>page
155, Fig. 147 and may be confirmed
acoustically. It will then be shown in the entry

field.

- To enter a space: Move your finger from left to
right across the MMI touch pad.
- To delete a character: Move your finger from
right to left across the MMI touch pad.
- To use the suggestion: Press the rotary push­

button.

- To switch directly to the results list: Turn the
rotary pushbutton to the right.
- To enter Cyrillic characters: Press the right
con­

trol button. Select and confirm Switch to Cyril­
lic characters.
- To open the speller: Select the right control
button > Open speller. Text and numbers can
be entered via the speller
^>page
159.
Telephone: call list

K%
Who would you like to call?
•
e.g
"John Smith"

^
Mailbox

B"
Smith, John
•"i 0049841123456

CO
<
O rN IV rN
i-H

00

Fig.
148 Display when MMI touch is active
155

Multi Media Interface
Moving the crosshairs
Applies to: vehicles with MMI touch
Moving the map
Applies to: vehicles with MMI touch

Strausberg
Potsdam-UJ3
/
101
9l

kenfelde-Mahlow
Fiirstenw

Fig.
149 Moving the crosshairs
Important: A map must be displayed

•=>
page 219.
- To bring up/hide the crosshairs: Press the ro­
tary pushbutton to bring up the crosshairs
(Î)

*>Fig.
149. Or: Press the MMI touch pad. To
hide the crosshairs, press the
JBACK|
button
(J)
^>page
152, Fig. 140.
- To move the crosshairs on the map: Move your
finger in the desired direction on the MMI
touch pad while the crosshairs are displayed

^Fig.
149.
To move the crosshairs quickly: Move your finger
quickly in the desired direction on the MMI touch
pad while the crosshairs are displayed
(Î)

^Fig.
149. The crosshairs will only stop moving
again after
a
few seconds.
Briesela Strausberg

avel
PotsHam-na

Furstenw
Blankenfe Ide-Mahlow

L
•J

Fig.
150 Moving the map
Important: A map must be displayed

•=>
page 219.
- To bring up/hide the crosshairs: Press the ro­
tary pushbutton to bring up the crosshairs
(T)

•=>F/g.
150. To hide the crosshairs, press the
|BACK| button
® ^>page
152, Fig. 140.
- To move the standard map/Google Earth map:
Move two fingers in the desired direction on the
MMI touch pad while the crosshairs are dis­
played
^>Fig.
150.
- To move the map: Move two fingers in the de­
sired direction on the MMI touch pad while the
crosshairs are displayed
^>Fig.
150.
- To move the map quickly: Move two fingers in
the desired direction on the MMI touch pad
quickly while the crosshairs are displayed. The
map will only stop moving again after
a
few
seconds.
156

Multi Media Interface
Zooming in/out on map

Applies
to: vehicles with MMI touch

CO

rN
IV
rN
•-i

00

Fig.
151 Zooming in/out on the map
Important: A map must be displayed

^>page
219.
- To zoom in/out on the map: Press the rotary
pushbutton to bring up the crosshairs. Place
two fingers on the MMI touch pad and move
them apart/together
^>Fig.
151.
To hide the crosshairs, press the
I
BACK] button

Q)*>pagel52,
Fig. 140.
Adjusting the sound focus

Applies
to: vehicles with MMI touch
Important: The
Balance/fader*
option must be
selected
•=>page
260.
- To move the crosshairs of the sound focus:
Move your finger in the desired direction on the
MMI touch pad.
-
To
store the location of the crosshairs: Press
the rotary pushbutton twice. Or: Press the

I
BACK|
button
® t>page
152, Fig. 140.
Operating the DVD main menu

Applies
to: vehicles with MMI touch
Important: A video DVD must be playing

o
page 243.
- To select a menu option: Move your finger up/
down
or to
the
Left/right
on the MMI touch

pad.

- To confirm your selection: Press the rotary
pushbutton.

\J
Note
-You can set the volume of the MMI touch
spoken cues according to your own prefer­
ences
^>
page 262.
- Please note the direction of writing if the
menu language is set to Arabic.
Rotary pushbutton with
joystick function
Using

Applies
to: vehicles with joystick function

Fig.
152

function

m[

How
to

#
#

use
the rotary pushbuttc

in
m
op
i <
cc

0

n
with joystick
You can push the rotary pushbutton up/down
(T)

^>Fig.
152
or
to the
Left/right©.

Calling up the entertainment drawer

Applies
to: vehicles with MMI touch
To call up the entertainment drawer: Press the
rotary pushbutton downwards to open the enter­
tainment drawer®
^>page
161, Fig. 156. You
can then select and confirm a function.
To close the entertainment drawer: Press the ro­
tary pushbutton upwards to close the entertain­
ment drawer. Or: Press the |BACK| button
@

opage
152, Fig. 140.
Further functions

Applies
to: vehicles with joystick function
Displaying the entry field/switching to the
speller
Push the rotary pushbutton upwards
^>page
157,
Fig. 152 to access the entry field or the begin­
ning of
a
list in the central area. If the entry field •
157

Multi Media Interface
is already open, you can switch directly to entry
via the speller by pushing the rotary pushbutton
upwards again
opage
159.
On the map
Important: A map must be displayed

^>page
219.
- To display the entry
field:
Push the rotary
pushbutton upwards.
- To display the route: If route guidance is ac­

tive,
you can have the route displayed by push­
ing the rotary pushbutton upwards

^>page
213, Fig. 176.
- To zoom in/out of the map: Turn the rotary
pushbutton to the
left/right
to make the map
scale larger or smaller.
- Further options for the map: Refer to

•=>
page 220.

Applies
to: vehicles without MMI touch with joystick function
- To bring up/hide the crosshairs: Press the ro­
tary pushbutton. The crosshairs will appear on
the map. To hide the crosshairs, press the

I
BACK| button.
- To move the crosshairs: With the crosshairs

displayed,
turn the rotary pushbutton in the di­
rection you would like to move the crosshairs.
Press and hold the rotary pushbutton until the
crosshairs are at the desired position on the

map.

Adjusting the sound focus

Applies
to: vehicles without MMI touch with joystick function
Important: The balance/fader option must be se­
lected
^>
page 260.
- To adjust the sound focus using the cross­

hairs:
The crosshairs can be moved horizontal­
ly. Turn the rotary pushbutton to the left or
right. To move the crosshairs vertically, press
the rotary pushbutton. Turn the rotary push­
button to the left or right. Press the rotary
pushbutton again to save the setting.
Operating the DVD main menu
Important: A video DVD must be playing

^>page
243.
- To select a menu option: Move the rotary push­
button with joystick function up or down, or to
the
Left
or right.
- To confirm your selection: Press the rotary
pushbutton.
Calling up the selection/options menu with
the rotary pushbutton

Applies
to: vehicles with joystick function
90.5 MHz
91.5 MHz
96.6 MHz

Applies
to: MMI control console with rotary pushbutton and

joystick
function

Fig.
153 Calling up the selection/options menu with the

rotary
pushbutton
Important: The symbol for the selection menu
must be shown on the infotainment display

*Fig.
153.
To call up/close the selection menu: Press the
rotary pushbutton to the Left
^Fig.
153
to call
up the selection menu. You can then use the ro­
tary pushbutton to select and confirm a function.
Press the |BACK| button
© ^>page
152, Fig. 140
to return to the previous function.
To call up/close the options menu: Press the ro­
tary pushbutton to the right
^>Fig.
153 to call up
the options menu. You can then use the rotary
pushbutton to select and confirm a function.
158

Multi Media Interface
Press the
|BACK|
button (7)
ipage
152, Fig. 140
to return to the previous function.
Speller for
letters/numbers

Esnni
33!
ABC DE
FCHI
J
K

•
Schmidt,
area
700 m (D) Ingolstadt,
8504S AUFDERSCHANZ
<=•
700 m (D) Ingolstadt,
85049

CO

rN
IV
rN
•-i

00

Fig.
154 Illustration: Speller for letters/numbers
You can use the speller to enter letters, numbers
and symbols on the MMI. This option is available
while the entry field
(f)
is active
^>Fig.
154.
- To call up/close the speller for letters/num­

bers:
Push the rotary pushbutton upwards/
downwards while the entry field is active. Or:
Select the right control button > Open speller/
Close speller.
- To enter a letter/number: With the selection
line activated, turn the rotary pushbutton
@

^>Fig.
154
to select the desired Letter/number.
Press the rotary pushbutton to confirm the let­
ter/number. Your entry will appear in the entry
field (2). When you have entered all characters,
select and confirm button (1) to switch to the
results list. Or: Push the rotary pushbutton
downwards.
- To enter diacritics (e.g. â, ç, n, ô)*: With the
selection line activated, turn the rotary push­
button to select a letter
@
^>Fig.
154. To open
the corresponding set of diacritics, press and
hold the rotary pushbutton. Turn the rotary
pushbutton to select a diacritic while in the
character selection line
@^>Fig.
154. Press the
rotary pushbutton to apply the diacritic. To
close the set of diacritics without selecting a
character, press and hold the rotary pushbut­
ton again. Or: Select and confirm |âôû|(7)

^>Fig.
154. Select and confirm a diacritic.
- To delete a character: Use the rotary pushbut­
ton to turn the pointer to
OFig.
154, and
then press the rotary pushbutton. To delete all
characters in the entry
field,
select
and
press and hold the rotary pushbutton until all
characters have been deleted.
- To enter a special character: Select and confirm

\M\®*Fig.
154.
flâûl
(7) or
|T23l
(§).
Use the
speller for numbers to select and confirm the
special character desired (such as a hyphen or
full stop).
- Input help: In some cases (such as in the
navi­

gation system*), the system will suggest a

word*
to complete your entry while you are still
making
it@
^Fig.
154. You can confirm the
word by pushing the rotary pushbutton up­
wards.
- Results list: In some cases (such as in the direc­

tory),
the system will switch to the results List
(D
^>Fig.
154 automatically. Select and confirm
a suggestion from the List.
Requirement: The entry field (2)
^>Fig.
154 must
be active.
- To switch between the speller and the MMI
touch
pad*:
The handwriting recognition fea­
ture is automatically activated for the MMI
touch
pad*,
which means you can simply start

writing.

159

Multi Media Interface
Overview of the symbols in the speller
The symbols of the speller for
Letters/numbers

are explained in the following table:


©
®

0

©
©
©
©
©
©
©
©

Symbol / marking

|LlST|orM

Entry field
Results list

•

É

[T&?1

àôû

|123|/|ABC|

.

Character selection
•


Description
To switch to the results list.
The current entry is displayed.
Menu language Arabic: A vertical Line on the
left/right
side of the
cursor indicates where the next character will be inserted.
A list of suggestions for the letters already entered is displayed.
To switch from lower case to upper case letters and vice versa.
Menu language Arabic: To show additional Arabic characters.
To open further speller options, e.g. Close speller, Clear entry field
or Switch to Cyrillic characters
Punctuation and special characters
To display diacritics (e.g. â, ç, n,
ô)
or the Cyrillic alphabet.
Menu language Arabic: To switch between Arabic and Latin charac­

ters.

To switch the speller from letters to numbers and vice versa
To enter a space in the entry
field.

The character selected will be highlighted.
The suggested word* can be accepted by pushing the rotary push­
button upwards.
To delete the character to the left of the cursor.
Menu language Arabic: Note the direction of writing.
Diacritics are not available for every letter.
Search function
Applies to: vehicles with search function

You
can enter
search
terms in any order using
the search function.
The search function is available in the Car*, Ra­

dio*,
Media*, Telephone*, Navigation* and Audi
connect* menus.
Calling up the search function

m
Il

ALW

i

@

Fig-

men

•
Albert, Simon

•
A.binson,
Mary
•
Albom,
Michael

•
Allen, Susan

f
Allen, Toby
155 Illustration:

j

Search function in the

1
1

i

ê

telephone
•
a
m
'
m
•
co

§

•
SeLect:
1MENU|
button
>
desired menu item

(e.g.
Telephone).

•
Turn the rotary pushbutton to the Left until the
entry field
(i)
^>Fig.
155 for the search func­
tion is displayed. Or: Push the rotary pushbut­
ton upwards to call up the entry field
(Î).

The handwriting recognition feature is automati­
cally activated for the MMI touch
pad*,
which
means you can simply start writing.
Searching for an entry

•
Enter one or more search terms in the entry
field in any order. The individual search terms
must be separated by spaces. •
160

Multi Media Interface
The system may make suggestions to complete
your entry* (f)
oFig.
155 depending on
what
you
have entered. Further entries containing the
search terms entered will be displayed in the list
of
results
(2).
If the desired term is not yet displayed, continue
entering Letters until it appears.
The first few letters of the search terms will of­
ten be sufficient to bring up a list of results. In
the Telephone* menu, for example, write the
ini­

tials of the contact you are looking for, separat­
ing them with a space.
Confirming an autocomplete suggestion
Important: An autocomplete suggestion* (J)

•=>F/g.
155
must be displayed.
Menus and symbols

•
When using MMI touch*: Press the rotary
pushbutton.
Using an entry from the results list
Important: At least one entry must be displayed
in the results List (2)
^>Fig.
155.

*•
When using MMI touch*: Turn the rotary push­
button to the right. SeLect an entry from the
list and confirm it.

•
When using the speller: SeLect and confirm

I
LIST
I Qo page
159, Fig. 154. Or: Push the ro­
tary pushbutton downwards. Select an entry
from the list and confirm it.

0
19
Telephone: Call list
Detailed station information Who would you like to call? Preferred image
e.g.
John Smith

•
Mailbox

th,
John 049841123456

®
®l@

Fig.
156 Illustration: Menus and symbols

CO
<
O
rN
IN
rN
t-H
o <
®
©
©

0

©
©
©

Symbol/
marking
Selected option
TMC
Entertainment drawer
Jukebox* import process
Repeat track
Random playback
Arrow
Description
Selected function
Reception of TMC/TMCpro/online traffic information
^>page
225
Information on the media source currently selected or an event

(e.g.
a call) is displayed. Depending on the vehicle's equipment, you
may be able to operate functions (e.g. tuning to a radio station, an­
swering a call) via the open entertainment drawer
^>page
157
Copying audio/video files to the jukebox
•=>page
236
The track currently playing will be repeated
Opage
247
All tracks in the playlist will be played in random order

Opage
247, Random playback
Information can be called up by pressing the rotary pushbutton
when text is highlighted
161

Multi Media Interface
©
©

©

©
©
©
©
©
©

@
@

©

©
©
©
©

Symbol/
marking
Signal strength bars for
telephone
Exclamation mark on the
telephone
Signal strength bars for
data connection*
2C/3C/LTE*
Mute function
Roaming
Import procedure
Options menu*

Bluetooth*

Scrolling bar
Entry field
MMI touch*
Rotary control
Checkbox
Selection list
Battery*
Description
Reception strength for the telephone
Indicates missed calls
Reception strength of the active connection, or

PIN:
Enter
the
SIM PIN code
PUK:
Enter
the PUK code

SIM:
Insert
the
SIM card
Network coverage of the active connection
^>page
203

2G:
GSM
network

3G:
UMTS network

LTE*:
LTE network
Audio source muted
^>page
261
Connected mobile
phone/SIM
card inserted in SIM card reader* or
embedded SIM card has left its mobile network
Import/update of contacts in the directory/call list
Select and confirm specific functions for individual menu items and
make changes to settings.
Bluetooth device connected
•=>page 2371'•=>page
173
Signifies a long list.
You can move within lists by turning the rotary pushbutton
Entries that can be changed using the speller for letters/numbers

^page
159 or the MMI touch
pad*
^page
155
Can be used via the MMI touch pad
Settings for the selected function can be made by turning the rotary
pushbutton
You can switch certain functions on
(vf
or off
•
by pressing the ro­
tary pushbutton.
Settings for the selected function that can be called up by pressing
the rotary pushbutton
Battery charge level of the connected mobile phone during wireless
charging
162