infotainment AUDI Q2 2021 Owner´s Manual

Telephone
Using contacts from another mobile phone
Applies to: vehicles with Audi connect (infotainment) and
Audi phone box
If your own mini SIM card is inserted in the SIM
card reader and is used for telephone calls, you
can
access
the directory on another mobile
phone.
Important: A mini SIM card must be inserted in
the SIM card reader.

•
Refer to
opage
258, Directory.
- When the MMI system has downloaded the
directory from the mobile phone, the
con­

tacts from the SIM card will no longer be
shown in the MMI directory.
- When you switch the ignition on again after
switching it off and leaving the car, the MMI
system will load the mobile phone's directo­
ry if the phone is within range and Blue­
tooth is activated both on the phone and on
the MMI system. If this is not the case, the
MMI system
wiLl
show the contacts from the
mini SIM card in the SIM card reader.
Searching for a contact
Applies to: vehicles with telephone

•
Select:
IMENU|
button
>
Telephone > left
con­

trol button > Directory.

•
To Limit the search, enter the initials of the
con­

tact you are looking for individually in the entry

field,
separating them with a space. Enter
addi­

tional Letters if necessary.

•
Select and confirm a contact in the directory.
The telephone numbers for the contact you
have selected will appear.

•
SeLect and confirm a phone number to start the

call.

scrolling speed depends on the number of
entries in the List.
- For more information on the search func­

tion,
please refer to
^page
160.
Show contact details*
Applies to: vehicles with telephone

You
may
be
able to have contact details dis­
played, depending on the equipment in your
ve­

hicle.
John Smith

m

,n
0049841123456
£

B
001701239873

BE
Berlin

m
[email protected]

m
'

1

Fig.
167 Show contact details

(i)
Note
- You can scroll rapidly through long lists by
turning the rotary pushbutton quickly. The

•
SeLect:
|MENU|
button
>
Telephone
>
left
con­

trol button.

•
Select and confirm Directory
>
a contact from
the directory.

•
SeLect: right control button > Show contact de­

tails.

-
Call:
Select and confirm the desired telephone
number.
- Navigation: To start navigating, select and
con­

firm the desired address. SeLect and confirm
Start route guidance.
Press the right control button to
caLl
up further
options for the contact details.
Add navigation destination
To start navigating, select and confirm the de­
sired address. Select and confirm Start route
guidance.
Read
contact1}

The MMI system automatically creates a name
tag for each contact in the directory, which you
can have the system read to you.

x)
Not available in all languages.
186

Telephone

CO

rN
IN
rN
•-H

00
Store as favourite
Refer to
^>page
181, Favourites.
Send text message*
You can send the selected contact a text message

tapage
182.
Delete contact
You can delete a contact you have selected.
© Note
You can only edit/delete the contacts in the
local MMI memory.
Importing/exporting contacts
Applies to: vehicles with telephone

You
can import or export contacts in the vCard
format
(.vcf)
into or from the directory.
Important: An SD card must be inserted in one of
the SD card readers *
^>page
235, a USB mass
storage device must be connected to the Audi
music interface*
Opage
240, or the require­
ments for Audi connect infotainment services*
must be fulfilled
^>page
191.

*•
Select:
|MENU|
button
>
Telephone
>
left
con­

troL button > Directory.

•
Select: right control button > Directory set­

tings.

- To import contacts from a storage device: Se­
lect and confirm Import contacts
>
SD card 1/
SD card 2 or USB device
1/USB
device 2
>
de­
sired contacts
>
Start import.
- To export contacts to a storage device: Select
and confirm Export contacts
>
SD card
1/SD

card 2 or USB device 1/USB device 2
>
desired
contacts
>
Start export.
- To select all contacts at once for import/ex­
port: Select and confirm Import contacts/Ex­
port contacts > SD card 1/SD card 2 or USB de­
vice 1/USB device 2
>
All
>
Start import/Start
export.
- Please always note the information in the
chapter
^>page
204, General notes on Audi
connect (infotainment).
- For more information on the myAudi ac­
count, please refer to my.audi.com.
- The imported contacts are stored in the lo­
cal memory of the directory you are using.
- You can import up to 1000 contacts. You
can call up the memory capacity of the di­
rectory any time
^page
189.
- Never store important data on SD cards or
USB mass storage devices. Audi shall not ac­
cept any liability whatsoever for the Loss of
data or media.
- It is not possible to export contacts which
have been downloaded from a mobile

phone.

- There should be no files or directories on
the storage medium other than the contacts
you wish to import.
Other settings
Telephone settings
Applies to: vehicles with telephone

•
Select:
|MENU|
button
>
Telephone
>
right
con­

trol button
>
Telephone settings.
Call options*
Call forward: Forwarding of incoming calls to
your mailbox or to another phone number can be
switched on/off. You can use Check status to
check whether this function is activated or deacti­

vated.

Call waiting: If this option is activated
Fvf,
you
will be informed of incoming calls when you are
on the phone. You can use Check status to check
whether this function is activated or deactivated.
Transmit caller ID: Sending your telephone num­
ber in outgoing calls can be activated/deactiva­

ted.
With the Network-dependent option, the
setting agreed in your mobile network service
contract will be used. The settings apply only to
the Telephone menu in the MMI system. When
the Bluetooth connection has been terminated,
187

Telephone
the settings of your mobile phone apply. You can
use Check status to check whether this function
is activated or deactivated.
Telephone mode*
On vehicles with a car telephone kit, you can
choose between three different telephone modes
to optimise the mobile network response:
- Automatic: The car telephone automatically
switches between the GSM (2G), UMTS (3G)
and LTE networks. This depends on the mobile
network's availability and reception, and on the
position of the vehicle. In this mode, there
might be restrictions when using Google Earth
or Wi-Fi.
- Telephony optimised: The car telephone kit
registers with the GSM network (2G). In this

mode,
the reception is prioritised for making
and receiving calls. There may be restrictions
when using Google Earth or Wi-Fi.
- Data service optimised: The car telephone
reg­

isters with the GSM (2G), UMTS (3G) or LTE net­
work. This depends on the mobile network, its

reception,
and the position of the vehicle. In
this mode, the reception is prioritised for the
use of data services. There may be restrictions
when making and receiving calls.
Ring tone and volume
settings1'

You can use the Mute telephone function to
switch ring tone playback via the MMI loudspeak­
ers on/off. Ring tones are played when you select
the function Ring tone. Select an entry from the
list and confirm it. For the settings Ring tone
volume/Message volume, see
^>page
261. You
can adjust the Microphone input level during an
active phone call using the rotary pushbutton.
Network settings*
Refer to
^>page
259.
Serial number
(IMEI)*

The serial number of the telephone module in­
stalled in the MMI system is displayed.
Switch on telephone/Switch off telephone
Applies to: vehicles with car telephone kit
The car telephone will be turned "on" automati­
cally when the ignition is switched on, as long as
it was nor switched off separately the last time it
was used.
- You can bond several mobile phones to the
MMI system; however only two connections
are active at a time.
-All bonded Bluetooth devices can be deleted
by resetting the Bluetooth function to the
factory settings
^page
256.
- If you select the telephone mode Automatic
or Telephony optimised, there may be net­
work restrictions if you try to use Audi
con­

nect infotainment services* and make tele­
phone calls at the same time.
Further options

•
Select:
[MENU|
button > Telephone > right
con­

trol button.
Connection manager
Refer to
^>page
257.
Bluetooth settings*
Refer to
opage
258.
Online settings*
Refer to
^page
258.
Wi-Fi settings*
Refer to
^>page
201, Wi-Fi hotspot.
Data connection settings*
Refer to
^>page
203, Configuring the data con­
nection.

11
Depends on the connected mobile phone
188

Audi connect (infotainment)

CO

<
O
rN
IN
rN
,—1

Audi connect
(infotainment)
Introduction
Applies to: vehicles with Audi connect (infotainment)
Audi connect infotainment services allow online
information to be transmitted directly and inte­
grated into the vehicle.
Depending on the equipment in your vehicle,
Audi connect infotainment services are available
using the options given below.
Only use Audi connect infotainment services
when the traffic conditions allow you to do so
safely - risk of accident! Please always ob­
serve
<^>page
152, Notes on traffic safety.
Refer to
^>page
204, General notes on Audi
connect (infotainment) before using.
Option 1: Using the
embedded SIM card
Applies to: vehicles with an embedded SIM card
The data connection for the Audi connect info­
tainment services is established via an embedded
SIM card
(eSIM
card) fitted in the vehicLe. You
can use Audi connect infotainment services right
away.
© CAUTION
- The data connection costs for Audi connect
infotainment services are included in the
price of Audi connect (infotainment). This
does not include services which use the Wi-
Fi hotspot, such as online media

<=>page
239. These services require
addi­

tional paid data plans
^>page
197. For
more information on prices and purchasing,
please visit my.audi.com.
- Depending on the configuration of the Wi-Fi
device you are using (refer to the operating
manual of your Wi-Fi device for more de­

tails),
the SIM card of the device may be
used in certain cases to provide the data
connection for Internet-supported apps and
services which use the MMI Wi-Fi hotspot.
Depending on your network provider, you
may be charged for this service, especially if
you are using the system abroad. We there­
fore strongly recommend that you use an
unlimited data
plan.
For more information,
contact your service provider. Some exam­
ple cases are described below:
- Data plan expired/used up
- Data plan not valid abroad
- SIM card in the card reader* is not
a
data
SIM card
- SIM card in the card reader* is defective/
not valid
- Network is switched automatically due to
a low signal strength/data rate of the Wi-
Fi hotspot, the eSIM* or the SIM card in
the card reader*
- Connection to Wi-Fi hotspot interrupted
- To make phone calls, you can connect
a
mo­
bile phone via the Bluetooth remote SIM Ac­
cess Profile*
^>page
193 or the Bluetooth

handsfree
profile
^>page
173.
- A data connection for Audi connect infotain­
ment services is pre-configured at the facto­
ry. However, if configuration is necessary,
you can change the data connection settings
at any time
^>page
203.
Option 2: Using your
own SIM card
Introduction
Applies to: vehicles with Audi connect (infotainment)
Your own SIM card will be used for all data
con­

nections.
You have the following options for using your
own SIM
card:

- Using the SIM card reader*
^>page
192
191

Audi connect (infotainment)
- Connecting an
rSAP-enabled15
mobile phone to
the MMI via Bluetooth
^>page
193
- Using a mobiLe device (e.g. a smartphone) as a
personal Wi-Fi
hotspot2^
for the MMI

cépage
195
©
©
1
CAUTION
- The connection via the eSIM card

^page
191 is disconnected when you use
your own SIM
card.
All data connections for
all Audi connect infotainment services will
use your SIM
card.
Depending on your net­
work provider, you may be charged
for
this
service, especially if
you
are using the sys­
tem abroad. We therefore strongly recom­
mend
that
you use an unlimited data
plan.

For more information, contact your service
provider.
- Depending on the configuration of the Wi-Fi
device you are using (refer to the operating
manual of your Wi-Fi device for more de­

tails),
the SIM card of the device may be
used in certain cases to provide the data
connection for Internet-supported apps and
services which use the MMI Wi-Fi hotspot.
Depending on your network provider, you
may be charged for this service, especially if
you are using the system abroad. We there­
fore strongly recommend
that
you use an
unlimited data
plan.
For more information,
contact your service provider. Some exam­
ple cases are described below:
- Data plan expired/used up
- Data plan not valid abroad
- SIM card in the card reader* is not
a
data
SIM card
- SIM card in the card reader* is defective/
not valid
- Network is switched automatically due to
a low signal strength/data rate of the Wi-
Fi hotspot, the eSIM* or the SIM card in
the card reader*
- Connection to Wi-Fi hotspot interrupted

y
Note
A data connection for Audi connect infotain­
ment services is pre-configured at the factory.
However, if configuration is necessary, you
can change the data connection settings at
any time
^>page
203.
Option 2.1: Using the SIM card reader

Applies
to: vehicles with Audi connect (infotainment)

a

Fig.
168 Mini SIM card (actual size)
Important
The vehicLe must be stationary, and the ignition
must be switched on.
A data-enabled mini SIM card must be inserted in
the
MMI's
SIM card reader.
A data connection for Audi connect infotainment
services must be configured.
Inserting a mini SIM card

•
Press the |MENU| button
>
Audi connect.

•
Select and confirm Activate data connection. •

1'
Not available in all markets. Applies to mobile phones

with
Bluetooth remote SIM Access Profile on vehicles with

Audi
connect (infotainment) and Audi phone box*.

2)
Not available for all countries and models
192

Audi connect (infotainment)

CO

<
O
rN
IN
rN
i—i

§
00

•
The missing corner of the mini SIM card should
be at the front left. Slide the mini SIM card into
the slot in the SIM card reader
^>Fig.
168 until
you feel it engage.

•
Select and confirm Enter PIN. Enter the PIN for
your mini SIM card in the MMI.

•
Select and confirm OK.

•
To allow the MMI to connect automatically in
the future, select and confirm Yes.
After connecting successfully
After connecting successfully, the signal strength
and type of connection will appear in the status
line of the infotainment display ©/©

^>page
161.

•
Select the desired type of connection for tele­
phone calls: Telephone installed in vehicle
(SIM card) or Personal mobile phone (Blue­
tooth)
•=>
page 173.

*-
Confirm the system query of whether an Inter­
net connection should be established with Yes,
always connect if necessary.
You can now use Audi connect infotainment serv­

ices.

Removing a mini SIM card
• Briefly press the mini SIM
card.
The mini SIM
card will then be ejected from the slot and can
be removed.
CAUTION
- The connection via the eSIM card

^>page
191 is disconnected when you use
your own mini SIM
card.
All data connec­
tions for all Audi connect infotainment serv­
ices will use your SIM
card.
Depending on
your network provider, you may be charged

for
this service, especially if you are using
the system abroad. We therefore strongly
recommend
that
you use an unlimited data

plan.
For more information, contact your
service provider.
-To avoid damaging the SIM card reader, on­
ly use mini SIM cards (25 mm x 15 mm)

^>Fig.
168. Please contact your service pro­
vider for more information on mini SIM

cards.

- Should you have inserted a different SIM
card size in the SIM card reader, do not un­
der any circumstances attempt to remove it
yourself as this may damage the SIM card
reader. Please contact a qualified workshop.
- If you use SIM card adapters, the vibrations
caused
by
the movement of the vehicle may
cause the SIM card to become detached
from the adapter - risk of damage to the
SIM card reader.
- You can connect a mobile phone via Blue­
tooth (Handsfree) to make phone calls

^>page
173.
- You can determine when the MMI system
establishes an Internet connection

o
page 203.
- The mini SIM card must not be removed
from the SIM card reader while Audi
con­

nect infotainment services are being used.
- In order to use your own mini SIM card for
Audi connect infotainment services, you will
need a mini SIM card with a data option; to
use LTE*, the SIM card will also need to
have an LTE data option.
Option 2.2: Connecting an rSAP enabled
mobile phone via Bluetooth
Applies to: vehicles with Audi connect (infotainment) and
Audi phone box

Fig.
169 Is your mobile phone rSAP enabled? This QR code
takes you directly to the mobile device database (data
con­

nection costs vary according to your mobile phone
con­

tract).
•
193

Audi connect (infotainment)

Important1'

Your mobile phone must support the Bluetooth
remote SIM Access Profile (Bluetooth rSAP).
For information regarding which Bluetooth
con­

nections and functions your mobile phone sup­

ports,
contact your mobile network service pro­
vider or consult the mobile device database at
www.audi.com/bluetooth
oF/g.
169.

The vehicle must be stationary, and the ignition
must be switched on.
The Bluetooth function and the discoverability
option of the MMI system
•=>page
202 and the
mobile phone must be activated.
The mobile phone you would like to connect must
not be connected activeLy to any other Bluetooth
device. The MMI must not be connected to a mo­
bile phone.
Access to your SIM card (SIM
Access)
must be ac­
tivated on your mobile phone.
Connecting a mobile phone

•
Select:
|MENU|
button
>
Audi connect.

•
SeLect and confirm Activate data connection.

•
Select and confirm Connect mobile phone >
Continue.

•
Select and confirm the desired mobile phone
from the list of Bluetooth devices shown. Or:
Search for the MMI system via the Bluetooth
device search function on your mobile phone.

•
Enter the PIN to establish a connection on your
mobile phone. If the PIN is already being dis­
played on your mobile phone, confirm it on the
phone and the MMI. You have about 30 sec­
onds to enter the PIN.
Please note any additional system queries on
your mobile phone, e.g. whether the phone
should connect automatically in the future. On
some mobiLe phones, you may aLso need to
download the directory separately.

•
You can now enter the PIN code for your SIM
card on the MMI.
Not available in all markets. Applies to mobile phones
with Bluetooth remote SIM Access Profile on vehicles with
Audi connect (infotainment) and Audi phone box*.

•
To allow the MMI to connect automatically in
the future, select and confirm Yes.
After connecting successfully
After the connection has been established suc­
cessfully, you will be shown a short message
con­

taining information on the profiles used to estab­
lish the connection. You can make changes to the
profiles via
|MENU|
>
Settings > left control but­
ton > MMI settings > Connection manager

ï>page
258. This can also be done at
a
later

time.

The signal strength symbol ©, connection type

symbol®
and Bluetooth
symbol
© will appear
in the status line of the infotainment dispLay
when the mobiLe phone has been connected suc­
cessfully
^>page
161.

•
Confirm the system query of whether an Inter­
net connection should be established with Yes,
always connect if necessary.
You can now use Audi connect infotainment serv­

ices.

(7) CAUTION
- The connection via the eSIM card

^>page
191 is disconnected when you use
your own SIM
card.
All data connections for
all Audi connect infotainment services will
use your SIM
card.
Depending on your net­
work provider, you may be charged for this
service, especially if
you
are using the sys­
tem abroad. We therefore strongly recom­
mend
that
you use an unlimited data
plan.

For more information, contact your service
provider.
- In order to use Audi connect infotainment
services via the remote SIM Access Profile,
you will need a SIM card with a data option;
to use LTE*, the SIM card will also need to
have an LTE data option. •
194

Audi connect (infotainment)

CO

<
O
rN
IN
rN
t-H
o < 00
- It is only possible to connect a mobile
phone via the remote SIM Access Profile on
vehicles with the Audi phone box.
- Bluetooth devices only have to be bonded

once.
Depending on the mobile phone you
are using, any devices that have already
been bonded to the MMI system are connec­
ted automatically when they are within
range and the ignition is on. You can bond
several mobile phones to the MMI system;
however only one connection is active at a

time.

- You receive the SIM PIN and the PUK from
your mobile network service provider to­
gether with the SIM
card.
If
you
enter the
SIM PIN code incorrectly three
times1)
in a
row, the SIM card will be be blocked. A PUK
(personal unblocking key) must be entered
in order to reactivate the SIM
card.

-The Bluetooth connection between the sys­
tem and the mobile phone is automatically
terminated when you leave the car.
- For further information regarding your mo­
bile phone, contact your mobile network
service provider or refer to the operating in­
structions for your mobile phone. For infor­
mation on using a phone in your car, please
go online (e.g. www.audi.com/bluetooth)
or ask an Audi dealer.
Option 2.3: Using a personal Wi-Fi hotspot
Applies to: vehicles with Audi connect (infotainment) and per­
sonal Wi-Fi hotspot
Important
The vehicle must be stationary, and the ignition
must be switched on.
Your mobile device and mobile network provider
must support the mobile Wi-Fi hotspot function.
The personal Wi-Fi hotspot on your mobiLe device
must be activated.
Other devices must be permitted to access the
mobiLe hotspot.
Connecting the MMI to a personal hotspot

•
Select:
|MENU|
button
>
Telephone
>
right
con­

trol button
>
Wi-Fi settings
>
Wi-Fi
>
on.

•
Then select and confirm Network search. The
devices found will be shown on the infotain­
ment display.
• Select and confirm your personal Wi-Fi hotspot
from the List.

•
You may need to enter the password specified
by your mobile device.
• Select and confirm OK.
A
WARNINf

Mobile devices, tablet and Laptop computers
and devices of
a
similar weight can only be
operated safely when the vehicLe is stationary.
Like any loose object, they can be catapulted
through the vehicle in an accident and cause
serious injuries. Always make sure that such
devices are securely stowed while you are

driving.

(T)
CAUTION
I

The connection via the eSIM card
^>page
191
is disconnected when you use your own SIM

card.
All data connections for all Audi connect
infotainment services will use your SIM
card.

Depending on your network provider, you may
be charged for this service, especially if you
are using the system abroad. We therefore
strongly recommend
that
you use an unlimi­
ted data
plan.
For more information, contact
your service provider.
- The Connection to personal hotspot option

cépage
202 will be switched on
([vf)
auto­
matically during the network search.
- Please contact your mobile network service
provider to find out which functions your
mobiLe device supports.

x)
The number of possible attempts depends on the SIM

card.

195

Audi connect (infotainment)
- Whether other devices can use the mobile
Wi-Fi hotspot depends on your data
plan.

- Audi recommends that you set
a
password
to protect mobile wireless networks from
unauthorised access.
- In order to use Audi connect infotainment
services via a personal Wi-Fi hotspot, you
will need a SIM card with a data option; to
use LTE*, the SIM card will also need to
have an LTE data option.
Configuring using
myAudi
Configuring Audi connect (infotainment)
Applies to: vehicles with Audi connect (infotainment)
Before you first use certain Audi connect infotain­
ment services, it is necessary to configure them
via your personal myAudi account:
- If
you
do
not
yet have a personal myAudi ac­
count, please register on the Internet at
my.audi.com.
- Add your vehicle to your myAudi account.
- Activate/configure the Audi connect infotain­
ment services you require for your vehicle in
your myAudi account.
- When you call up certain Audi connect infotain­
ment services on the MMI, it may be necessary
to also enter your myAudi user
data/PIN
in or­
der to connect the vehicLe to myAudi.
Detailed information on configuration can be
found on the Internet at my.audi.com.
Logging into myAudi in the vehicle
Applies to: vehicles with Audi connect (infotainment)
Before you
use
some Audi connect infotainment
services (e.g. Twitter*), you will need to connect
your vehicle
to
your myAudi account to use the
personal settings stored there.
Please log in using your
myAudi login details:
User name
Login
Co to alternative myAudi PIN entry

Fig.
170 Logging in to myAudi

•
Select:
1MENU|
button
>
Audi connect
>
right
control button > Login.

•
Enter your myAudi user data. Or: Enter your
eight-character myAudi PIN.

•
Confirm the entry with OK.
You can then call up the personal settings from
your myAudi account in the vehicLe.
You will receive your myAudi PIN after setting
up a myAudi account. For more information,
please refer to my.audi.com.
Calling up Audi connect
(infotainment)
Applies to: vehicles with Audi connect (infotainment)

•
London
^
100% i 0,8 mm
•• WISkm/h
5°C-7°C

fH
Online destinations
ff Online traffic information

Fig.
171 Audi connect (infotainment): Home
Important: The requirements for Audi connect in­
fotainment services must be met
^>page
191.

• Select:
|MENU|
button
>
Audi connect.
196

Audi connect (infotainment)

•
If necessary, confirm the message shown by se­
lecting Accept.
The Audi connect infotainment services available
will be listed on the infotainment display

^Fig.
171.
You can also filter the Audi connect infotainment
services by category:

•
Select: 1MENU| button
>
Audi connect
>
left
control button > e.g. Navigation for the Audi
connect infotainment services in the navigation
menu
•=>page
200.
Audi connect
infotainment services
Basic functions
Applies to: vehicles with Audi connect (infotainment)
Specific functions for individual Audi connect in­
fotainment services may be available in the serv­
ice's selection menu
<=s>page
154. Basic functions
can be accessed in the relevant options menu:

•
Select: |MENU| button
>
Audi connect
>
desired
Audi connect infotainment
service
> right
con­

trol button.
Depending on the Audi connect infotainment
service you wish to use, the following basic func­
tions may be available:
Save as a preview*
You can save every Audi connect (infotainment)
service as a preview and have it displayed on the
Audi connect infotainment homepage
(Î)
opage
196, Fig. 171.
Show on map
You can have selected content displayed on the
map and use
it
for route guidance.
Login
Refer to
^>page
196, Logging into myAudi in the
vehicle.

Read"

You can have the MMI read out some types of
content.
Call*
If
a
telephone number has been stored for an en­
try, you can call the number
and,
for example, re­
serve tickets.
Start route guidance
If
an
entry contains a location, e.g. in City

events,
this can be used as a navigation destina­

tion.
The route guidance function will be started
immediately.
Change search area
The search area selected can be changed at any

time.
For more information on search areas,
please refer to
^>page
211.
Closing an Audi connect infotainment service
You can close an Audi connect infotainment serv­
ice at any time and go back to the homepage

^>page
196, Fig. 171, regardless of which func­
tion you were using.
Data plans
Applies to: vehicles with an embedded SIM card
In connection with the eSIM for Audi connect in­
fotainment
services
which use the Wi-Fi hotspot
(e.g. online media), you can purchase data plans
directly in the vehicle from a selected mobile
network provider.
Important:
You must be registered as the eSIM card owner
(SIM owner)
Opage
191 in the mobile network
provider's customer portal and have purchased a
data
plan.
Further information can be found on
the Internet at my.audi.com.
You must have activated the in-car data plan pur­
chases function in the network provider's cus­
tomer
portal.
•

CO

rN
IN
rN
t-H
o
<
x)
Not available in all languages.
197