fold seats AUDI Q7 2011 Owner´s Manual

Seats and storage
time. When the vehicle is unlocked , the settings stored on the
remote con trol key are res to red .
If your veh icle is d riven by other persons using yo ur remote cont rol
key, you should save your individ ua l seat position on o ne of the
me mory buttons. Yo u can rec all you r setting s again sim ply and
conveniently by press ing the co rresponding memory button . When
t he vehi cle i s loc ked , the se se ttings a re a utom atic a lly re-assig ned to
the remo te control key and s tored .
& WARNING
• For safety reasons , the seat setting can only be recalled when
the vehicle is stationary -otherwi se you risk having an accident .
• In an emergency , the recall operation can be stopped by
pressing the [
ON/OFF] button or by briefly pre ssing any given
memory button. •
Appli es to vehicles: w ith seat memo ry
Activating remote control key memory
To be able to re ca ll the store d set tings wi th t he rem ote
c ontr ol key, the func tio n has to be activat ed in th e MMI.
- Sele ct : Fu nct ion button I C AR] > Systems*> Seat
adjustment
> Driver's seat > Key mem. profile > On. •
Rear seats
General information
Safe tran sportatio n of p asse nge rs on the re ar sea ts
r e q uir es pr op er safe ty pre caution s.
All passengers on the rear seats must be seated in compliance with
t he s afety gui deli nes e xplained in =>
page 201 and => page 211. The correct seating position is c
rit ica l for the safe ty of fro nt
and rear seat
p assenge rs alik e=>
page 194 .
& WARNING
• Occupants in the front and rear seat s must always be properly
restrained .
• Do not let anyone ride in the vehicle without the head
restraints provided. Head restraints help to reduce injuries .
• Loose items inside the passenger compartment, can fly
fo rward in a crash or sudden maneuver and injure occupants.
Always store articles in the luggage compartment and use the
fastening eyes, especially when the rear seatbacks ha ve been
folded down.
• Read and heed all WARNINGS =>
page 194, "Proper seating
positions for passengers in rear seats ".•
Adjusting seat (second row seating)
Th e fo re-and-aft adjustment * of the seat cushion and the
se atba ck angle c an be adjus ted .
Fig. 80 Ad jus ting
s eatback angle

....
~....-'""-~_3-:>--.....,__~~ :
······--... __ ;::::.:_ :::--~
Adjusting seatback angle
Fig . 81 Fore -and -af t
adju stme nt
- Pull the leve r up a nd pus h the seatback toward the rear to
t h e desired position~ fig. 80 . R elease th e leve r.
- Pull t he lever up so that t he seatback pivots forward.
Release t he lever and push the seatback to the rear to
retur n the sea tback to the nor mal pos ition.
Fore-and-aft adjustment*
- P ull the handle up and push the sea t forward or back
~ page 91, fig. 81.
- Releas e the handle and cont inue to p ush the seat u ntil the
sea t latc h engages.
& WARNING
• For safety rea son s, the seat mu st only be adju sted when the
vehicle is stationary · danger of accident!
• Exerci se caution when adjusting the seat . Adju sting the seat
without checking o r paying attention c an pinch finge rs or limbs·
danger of injury! •
Con trol s and equ ip­
m ent Vehicle
OP-eration
Seats and storage
Applies to ve hicles : with e ntry assist
Entry assist (second row seating)
The entry assist makes it easier for occupants to reach
the third row seating*.
Fig . 82 Sea tback
s e co nd r ow sea ting :
S eat back lat ch
Pushing second row of seats forward
- Lift the lever~ fig. 82.
- Tilt the s eatback forward .
- P ush the seat forward.
Pushing second row of seats back
-Push the seatbac k.
- Fo ld the s eat back up until i t latches.
To make entry to and exit from the rear of the ve hicle easier, the sea t­
backs for the second row seating can be folded fo rwa rd. At the same
time, the seats ca n be pushed forwa rd and to the rear. •
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
Applies to veh icles : w ith third row seat ing
Folding seatback up and down (third row
seating)
The third row seating is suitable for persons up to 1. 6
meters
(5 ft 3 in) in height.
•
Raising seatback
Fig. 83 Third row of
seats: Folding seat·
back up
Fig. 84 Third row of
seats: Folding seat­
back down
- Lift the Lever -Arrow- ~ page 92, fig. 83 and raise the
seatback until it Locks.
- Raise the head restraint until it locks.
Folding seatback down
- Lift the lever-Arrow- ~ fig . 84 and fold the seatback down
completely until it locks.
- The head restraint is automatically tipped down .
& WARNING
• Only persons up to a height of 5 feet 3 inches (1.6 m) may be
carried on the seats in the third row.
• Exercise caution when folding the seatbacks up and down.
Inattentiveness or carelessness when folding the seatback up and
down can pinch fingers or hands.
• Always check whether the latch is fully engaged by pulling the
seatback forward. •
Head restraints
Front head restraints
Fig. 85 Front seats
head restraints:
adjusting the height
The head restraints on the front seats can be adjusted to
provide safe support to head and neck at the optimum
height. When optimally adjusted , the top of the restraint

should be level with the top of the head. If that is not
possible, try to adjust the head restraint so that it is as close
to this position as possible~
page 194, "Proper adjustment
of head restraints".
To move the head restraint up, hold it at the sides with
both hands and slide it upward.
- To move the head restraint down, press the button and
slide the head restraint downward ::::> fig. 85 .
Refer to~ page 194, "Proper adjustment of head restraints" for
guidelines on how to adjust the height of the front head restraints to
suit the occupant's body size .
& WARNING
• Driving without head restraints or with head restraints that are
not properly adjusted increases the risk of serious or fatal neck
injury dramatically.
• Read and heed all WARNINGS ~
page 194.
[ i] Tips
Correctly adjusted head restraints and safety belts are an extremely
effective combination of safety features. •
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Rear head restraints Seats and storage
Fig. 86 Rear
seat:
outer head restraint
Fig. 87 Rear seat:
center head restraint
If there are passengers in the rear seat, fold the head
restraints up on the occupied seats or slide the center head
restraint upward at least to the next notch.
Adjusting the outer head restraints
- To fold the head restraint out, pull on the tab::::> fig . 86.
- To fold the head restraint up, tilt it upward until you feel
it click into place.
~
Vehicle care Do-it-yourselt service iTechnical data

Seats and storage
Adjusting the center head restraint
- To move t he head rest rai nt up, hold it at the sides with
both ha nds and slide it u pwa rd un til yo u feel it click into
p lace => fig. 87 .
- To move the head restraint down, press the button -arrow-
and slide the head restraint downward.
Removing the center head restraint
- Move the head restra int upwa rd as far as it can go .
- Press th e butt on -arrow- and pull the head rest raint out of
the backres t=> & .
Installing the center head restraint
-Slide the posts on the head restraint down into the gu ides
unti l you feel the posts click into place .
- Press the button -arrow- and slide the hea d res traint all
the way down . You shou ld not be able to pull t he head
restra int out of the bac krest.
& WARNING
• Only remove the rea r seat head restraint when necessar y in
order to in stall a child seat . In stall the head restraint again imme ­
diately once the chi ld seat is removed. Driving w ithout head
restraint s or with head restraints that are not properly adjusted
increases the risk of serious or fatal neck injury dramatically .
• The h ead res traints for the outer seats
in th e s econd row mu st
be folded up whe n persons a re being carried in the third row
seating* -danger of injury!
• Read and heed all WARNINGS~
page 194 •
Appli es to veh icles : wi th conven ience center a rmrest
Armrest
The armrest contains a storage compartment and two
cup holders.
Fig. 88 Arm re st
b etw een driver's a nd
pa ssenge r's se at
-Push on the re lease lever=> fig. 88 to ope n the storage
compar tment.
A max imum of two beverages can be accommodated in the armrest.
T he second c up holde r is lo cated un de r a cover.
& WARNING
Sp illed hot liquid can cau se an accident and per sonal injury.
• Never c arry any beverage container s with h ot liquid s, such a s
hot coffee or hot tea, in the vehicle while it i s moving . In ca se of
an accident , sudden braking or other vehicle mo vement, hot liquid
could spill, causing scalding burns. Spilled hot liquid can al so
cause an accident and pe rsonal injury.
• Use only soft cups in the cupholder . Hard cup s and glas se s can
c ause injury in an accident . .,_

Seats and storage
Luggage compartment
Expanding Luggage compartment
To expand the luggage compartment, the seatbacks can
be folded forward separately or together.
Folding the seatback forward
Fig. 90 Release lever
forouterseatback
Fig. 91 Release lever
forcenterseatback
- Pull the lever up=> fig . 90. The seatback pivots forward.
- Allow the seatback to latch in the lowermost position .
Raising the seatback
- Pull the lever up=> page 96, fi~. 90 and raise the seatback
until it is securely latched=>& .
Folding center seatback down
-Press the release button=> page 96, fig. 91. The red mark
on the release lever is visible.
- Tilt the seatback forward.
Raising center seatback
-Raise the seatback until it is securely latched=>& . It is
securely latched when the red mark on the release button
is no longer visible .
The center seatback can be folded forward separately. Using this
loading option , long objects (e.g. skis) can be carried in the interior.
& WARNING
• The backrest must always be securely latched so that the safety
belt of the center seating position can work properly to help
protect the occupant.
• The backrest must be securely latched in position so that no
items contained in the luggage compartment can slide forward
upon sudden braking.
• Always check whether the latch is fully engaged by pulling the
seatback forward.
• On vehicles with third row seating*, the center seatback must
be in the upright position and securely latched when persons are
being carried in the third row seats· danger injury!
• Never allow safety belts to become damaged by being caught
in door or seat hardware.
• Torn or frayed safety belts can tear and damaged belt hardware
can break in a crash. Inspect the belts periodically. Belts showing •

& WARNING (cont inued )
damage to webbing, bindings , buckles, or retractors must be
replaced.
& WARNING
Always read and heed WARNINGS=> & in "Loading the luggage
compartment " on
page 197.
0 Note
• When fo lding the backrest back i nto place, ma ke sure the safety
bel t does no t ge t ca ugh t, b ec ause i t can be damaged .
A damaged bel t
can fail to provide safe rest raint.
• Th e heating wires in th e rear w indow ca n be damaged by abrasive
objects on t he parcel s he lf . •
Tie-down rings
Th er e a re f our tie-d own rings in the lu ggage com part­
m en t for s ecuring lugg age items.
Fig . 92 Loca tion of
the tie-down rings in
the lug gag e c ompa rt ·
ment
- Sec ure the c argo to the tie-dow n rings => fig. 9 2.
- O bserve the safety notes=:> p age 19 8.
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
In a co llision, the laws of physics mean that eve n smaller items that
a re lo ose in the vehicle w ill turn in to heavy mis siles th at can c ause
ser ious injury. Items in the vehicle pick up kinet ic en ergy w hich varies
with the ve hicle an d th e we ight of the item. Vehi cle speed is the most
signif ica nt factor .
For example, in a frontal collis ion at a speed of 30 mph (48 km/ h),
t he force s acti ng on a 10- lb
(4 .5 kg) object a re a bout 20 times the
normal weight of t he item. T his means that t he weight of t he item
wou ld su ddenly be t he e quiva le nt of abou t 200 lbs (9 0 k g). One can
easily imagine the injur ies that an item of that weight flying freely
t hroug h the passenger com par tment can cause in a collis ion at a
speed considered relative ly low .
& WARNING
Weak , damaged or improper straps used to secure items to tie­
downs can fail during hard braking or in a collision and cause
serious personal injury.
• Always use suitable r etaining straps and properly secure items
to the tie -downs
in the luggage compartment to help prevent
items from shifting or flying forward .
• When the rear seat backrest is folded down, always use suit·
able retaining straps and properly secure items to the tie-downs in
the luggage compartment to help prevent items from flying
forward into the passenger compartment.
• Never attach a child safety seat tether strap to a tie-down .•
Vehicle care Do-it-yourselt service iTechnical data

-Hook t he ends of the rod in t he openings in the left and
r ight side trim panels==> fig. 94
@ .
Rolling up front Luggage compartment cover
- Pull the ends of the cover out of the attachi ng eyes in the
seatback .
- Allow the cover to ro ll up slow ly.
Rolling up rear Luggage compartment cover
- Pull t he rod out o f the op enings in t he side trim panels.
- Allow the cover to ro ll up slow ly .
Removing the Luggage compartment cover
- Pull the lever in the direc tion of the arrow==> fig. 95 and at
the same time lift the cover up and out .
Installing the Luggage compartment cover
-Lay the cover i n the left retaine r in the side trim and then
press it into the right reta iner until i t latches.
& WARNING
Whenever driving, nev er place any hard or he avy objects on the
luggage compartment or allow pets to sit on the luggage
compa rtment cover . They could become a hazard to v ehicle occu­
pants in the e vent of sudden b raking o r in an accident.
0 Note
• Make sure th at the heating wires in the rear lid do not get
damaged by objects scraping agai nst them .
Contro ls a nd e quip ­
m en t Vehicle
OP-eration
Seats and storage
• The two inner attach ing eyes on the left and right in the seatback
~ fig . 94 (Dare not sui table for ty ing down ca rgo -ris k of dam age.
Only t he luggage compa rtment cover s hou ld be attac hed here.
(I] Tips
• You can use the luggage compartment cover to store light we ight
clothing or articles but do not leave any heavy or sharp objects in the
pockets of the clothing .
• Remember that p lac ing clothing or articles on the luggage
compartment cover can block the driver's vision in the rear v iew
mirror . This also applies especially when you have to transport large
objects.
• So that stale ai r can escape from the vehicle be sure not to cover
the ventilatio n slot between the rear lid and the luggage compart ­
ment cover .•
Protective liner
Dirty or wet objects can be transported under the cargo
floor in a protective troy.
Fig . 9 6 Ca rgo flo or:
fold ed upr ight ...
Vehicle care Do-it-yourselt service iTechnical data

n,.,___S_ e _ a_t _s_ a_n_ d_ s_ t_o _r _a _,g:.- e ______________________________________________ _
Setting up the cargo floor
- Open the rear lid.
Fig. 97 Removing the
c arg o floor
- Set up cargo floor with the help of the handle @=:> fig. 96
and adjust the outside edges in the recesse s@ .
- Lay the i tems in the protective tray.
Folding the cargo floor up
-Open the rear lid.
- Fold the cargo floor up to the seatback with the help of the
handle @.
Removing the cargo floor , installing
- Open the rear lid.
- Fold the cargo floor up to the seatback with the help of the
handle @.
- To remove, pull the en tire cargo floor out of the guides
-arrow-=> fig. 97 in the direction of the rear of the vehicle .
- To install the cargo floor, set the front of it into the guides
and push it in the direction of the seatback until it
engages.
You can also store small items under the cargo floor.
The storage room in the protective tray can be enlarged by folding the
cargo floor forward or removing it .
The protective tray can be removed upward by the grip.
On vehicles with
6 or 7 seats* the cargo floor cannot be folded up,
only raised .
If the cargo floor is removed, the hooks must be pushed
into the guides under the third row seating w hen the cargo floor is re­
installed .
& WARNING
When the cargo floor is folded upright, the items being trans­
ported mu st not exceed the maximum cargo height, 2/3 of the
cargo floor space with the floor folded forward, or a weight of
about 33 lb. (15 kg).
[I] Tips
We recommend that you use a tie-down strap to secure objects to the
tie-down eyelets on the right and left sides of the vehicle. •

_______________________________________________ S_ e_ a_t _s_ a_n_ d_ s_ t_ o _ r_a """g::;. e _ __._
App lies to veh icles : w ith ski sac k
Ski sack
The ski sack allows a maximum of 4 pairs of skis or 2
snowboards to be carried inside the vehicle.
Loading
Fig. 98 Securing the
ski sack at the center
rear seat belt buckle
- Fold the center seatback forward==> page 96.
- Remove the sack from the luggage compartment and
unfold it.
- Place the empty sack over the lowered seatback so that the end with the zip fastener is in the luggage compart­
ment .
- Load objects from the luggage compartment into the ski
sack ==>& .
Securing
- Insert the ski sack strap©==> fig. 98 into the center seat
belt buckle @.
- Pull the securing strap tight by the free end of the belt ©.
Con tro ls a nd e quip ­
m en t Vehicle
OP-eration
-Vehicles with 6 seats*: The ski sack has two straps with
hooks on the underside. Hang the hooks into the luggage
compartment by the rear fastening eyes and pull the
securing strap tight by the free end ©-
Storage
- Release the securing strap for the sack.
- Pull the sack to the rear over the folded down seatback.
- Raise the seatback until it is securely latched .
- F old up the empty sack.
- Stow the ski sack in the luggage compartment so that it
cannot slide around .
& WARNING
• The ski sack is intended only for the transportation of skis,
snowboards and other light objects. To reduce the risk of serious
personal injury never transport heavy or pointed objects in the ski
sack.
• When braking rapidly or during an accident the load could be
displaced and cause injury to occupants.
• Sharp edges on the load must be covered for protection.
Always fasten the belt tightly around the sack and its contents
:::} page 101, fig. 98.
(I] Tips
Never stow the ski sack away if it's wet or damp (for example, snow
melting from skis). Let it dry completely be fore you stow it away. •
Vehicle care Do-it-yourselt service iTechnical data