brake pads AUDI Q7 2012 Owner´s Manual

Instrument s and warnin g/indic ator ligh ts 19
See your authorized Audi dealer as soon as
poss ibl e.
A WARNING
- I f the m (USA mode ls)/ 11] (Canada
mode ls) warning light does not go out,
or if it comes on while driving , the ABS
system is not working properly . The vehi ­
cle can then be stopped only with the
standard brakes (without ABS). You will
not have the protection ABS provides .
Contact your authorized Aud i dea ler as
soon as possible .
-USA models: If the - warning light
and
the m warning l ight come on to­
ge ther, the rear wheels could lock up
first under hard braking . Rear wheel lock­
up can cause loss of vehicle control and
an accident. Have your vehicle repaired
immediately by your authorized Audi
dealer or a qualified workshop. Dr ive
slowly and avoid sudden, hard brake ap­
plicat ions .
-Canada models: If the brake warn ing
light . and the ABS wa rning light
II]
come on together, the rear wheels could
lock up first under ha rd b rak ing . Rea r
wheel loc k-u p can cause loss of veh icle
control and an accident . Have your vehi­
cle repaired immediately by your a uthor­
ized Audi dea ler or a qualified workshop .
Drive slowly and avo id sudden, hard
brake applicat ions .
::J.:.I(®) Parking brake
The indicator light monitors the parking
brake.
-
When the pa rking brake is applied and the ig­
n ition is switched on, the. (USA mode ls)
I
• (Canada models) indicator lig ht comes o n.
T he indicator light must go out when the
parking b rake i s re leased.
BRAKE/((])) Brake system
T he warning/indicator light flashes if brake
fluid level is low, if there is an ABS system
malfunction or a parking brake malfunction .
The - (USA models)/ . (Can ada models)
l ight illum inate s when the ignition is turned
o n. It goes out after the eng ine has been
started . This ind icates that the bra ke warning
li gh t is func tioning properly.
If th e brak e warning light do es not light up
w hen the engin e is cran king, ther e may be a
malfunction in the electrical s yste m . In this
case, c onta ct your Audi dealer .
If the brake system warn ing/indicator light
flashes , there is a brake system malfunction .
By pressing the
! CH ECK I button , you can bring
up a d river message which expla ins the ma l­
f unct ion in mo re det ail
~page 32.
If the ABS fails, the ABS warn ing/indicator
li ght
m (USA models)/ ll] (Canada models)
flashes togethe r wi th the brake system warn ­
ing/ indica tor light ¢
A.
(USA mode ls): If the warn ing light - and
the war ning light
El illuminate toget her, im­
med iate ly contact yo ur autho rized Aud i dea le r
o r q ualified wor kshop to have all brake pads
inspec ted
~ page 36 .
When the light comes on , an aud ible warning
s ignal is also g iven .
A WARNING
-USA models: If the - warning light
and them warning light come on to ­
gether, the rear wheels could lock up
f ir st under hard bra king . Rear wheel lock­
up can ca use loss of vehicle control and
an accident . Have yo ur vehicle repaired
immed iate ly by your authorized Aud i
deale r or a qua lified workshop . Drive
slowly and avo id sudden, hard brake ap­
plications.
- Canada models: If the brake warning
light . and the ABS warn ing light
II]
come on togethe r, the rear whee ls could
.

II
Low fuel level
¢page 35
fi.fl1::jfl1-j Kefill Ad Blue*
¢page255
-Ad Blue,/'
•
•
•
••NI@
AdBlue ma lfunction*
¢poge255
Battery voltage
¢poge36
Worn brake pads
¢poge36
Dy namic headlight range
control defective
¢poge36
Check eng ine oil level
¢poge36
Engine oil sensor malfunc­
tion
¢poge36
Engine speed limitat ion*
¢poge36
Diesel particulate filter *
clogged
¢poge37
A dapt ive lig ht* defec tive
¢poge37
-Ignition lock malfunction
¢poge37
W indshield wiper defective
¢poge37
Tire pressure monitoring
sys tem
Loss of air pressure
¢poge293
T ire pressure monitoring
system
System not availab le
¢poge293
Dri ver information di spla y 35
Battery in remote control
key
¢poge39
A utomat ic transm iss ion
malfunction
¢ page 141
...?c, Key not in vehicle
Applies to vehicles: with Convenience key
!!I Key not in vehicle
This reminder appears along with the !!I sym ­
bol if the master key is removed from the
ve­
hicle with the engine runn ing. It is intended
to rem ind you (e .g. whe n cha ng ing dr ive rs)
not to cont inue the journey without the mas­
te r k ey.
If the master key is no longer in the ve hicle ,
you cannot swi tch off t he ig nit io n after stop­
ping the engine an d you also cannot start the
engine aga in. What is mo re, you cannot lo ck
t he ve hicl e from the o utsi de.
@. D Light/rain sensor defective
fll Automatic headlights/ automatic wipers
defective
If t he symbol illumina tes, the l ight se nsor has
f ailed. For safe ty rea sons the low beams are
tu rned on permanently with t he switc h in
AU­
TO. However , yo u can cont inue to tu rn the
li g hts on and off using the light switch . In the
case of a defect in the rain sensor, t he wind ­
shield wiper lever functions are still availab le.
Have the light/rain senso r ch ecked as soon as
poss ible by an author ized Audi dealer .
6 Windshield washer fluid level too low
~ Please refill washer fluid
If the symbol illuminates, add w indshie ld
washe r fl ui d to the washer system and also to
t h e headlight washer system
¢ page 2 73 .
Bl Fuel supply too low
II Please refuel

36 Driver in formation d isplay
When this symbo l (I illuminates for the f irst
time, the fuel reserve in your vehicle is sti ll
between 2 .6 and 3 .2 gallons (10- 12 liters) .
Refue l as soon as possib le
¢ page 252.
If the symbol lights up, even when there is
ample fuel in the tank, and the text
T a nk sys ­
tem malfunct ion! Cont act wor kshop
appears
in the display, there is a fault in the system.
Contact a qualified workshop to have the fau lt
rectified.
t::l Battery voltage
If the battery's state of charge is not in the
optimal range, the
f• ) symbol is shown in the
d isplay and the dr iver message
Low battery
c harge : battery will be charg ed while driving
appears.
Wh ile this dr iver not ificat io n is displayed, you
have to be p repared for lim ited start ing capa­
b ili ty.
Driv er m essage appears and goes out
again
I f t his driver message appears after the igni ­
tion is turned o n or wh ile driving and it goes
out again after a while, the battery has been
adequately recharged .
Driver message app ears and does not go
out again
If th is driver notification appears after the ig ­
nition is turned on or while driving and does
not go out again, the battery's state of charge
is not in the opt imal range. Starting capability
is restricted. Have the battery checked by an
author ized Audi dealer as soon as poss ible .
{0 : Worn brake pads
El Brake pads !
If the warn ing light illum inates, immediately
contact your authorized Audi dealer or quali­
fied workshop to have all brake pads inspect­
ed . On USA models the wa rning light
El
l ) - : USA mod els only
comes on together with the warning light
- · Both sets of bra ke pads on an ax le
must a lways be rep laced at the same time.
A WARNING
=
Driving w it h bad brakes can cause a colli-
sion and ser ious personal in jury.
- If the warn ing light
El and the warning
light
11111> with the message Brake
pads!
comes o n in the inst rument cluster
d isp lay, immediately contact your au­
thor ized Audi dealer or qualified wo rk­
shop to have all b rake pads checked or
re placed if ne cessa ry.
~(i) Headlight range control
II He adlight range control defective !
-
If the symbol illuminates, the dynamic head­
li ght rang e control is no longer work ing prop­
erly. Have the system checked and repa ired at
yo ur aut horized Aud i dea le r.
~ -Engine oil level
l!I Plea se check oil level
When the symbol illuminates, check the en­
gine o il leve l as soon as possible
¢ page 263.
T op off t he oil at your ear liest opportu nity
¢ page 264 .
't::r.~ Engine oil sensor defective
II Oil level ! Sensor defective
If the symbol illum ina tes, contact yo ur au ­
thorized Aud i dea le r and have the oil sensor
inspected. Unti l yo u have this done, check t he
oi l level each time you refue l just to be on the
safe s ide
¢ page 263.
!?) Engine speed limitation
Applies to vehicles: wit h engine speed limitatio n
II! Do not e xceed ma x. engine speed of X XXX
rpm .,,.

that must have a certain size. The system re­
sponds only after the distance measurement has been made. If a measurement is not pos­
sible, the system cannot respond and w ill not
react to a vehicle or someth ing else up ahead.
Open road
When the road is clear, the adaptive cruise
contro l works like cr uise control. It maintains
a constant target speed specified by the driv­
er.
Driving in traff ic
If a slowe r vehicle driving ahead is detec ted,
the adaptive cruise contro l decelerates (within
the limits of the system)
¢ page 124, Driver
intervention prompt
and c:> page 125, System
limitations
to its speed and after adjust ing,
tr ies to maintain the set distance from the ve­
h icle ahead. The vehicle may temporarily drive
slower than the set speed while adjust ing
¢ & in Description on page 113 .
If the vehicle in front accelerates, adaptive
cruise control also accelerates up to the speed
that you have set.
If the vehicle ahead slows to a stop, ACC will
slow your vehicle down and to a complete
stop if this is possible w ith in the system's lim ­
its and capabilities . ACC will not make an
emergency stop. The text message
ACC off :
manual c ontrol!
appears in the instr ument
cluster display . Once the veh icle stops, you
must depress the brake pedal to prevent the
vehicle from moving forward or "creeping". Depressing the brake pedal turns
off ACC.
When the veh icle ahead accelerates you can
reactivate ACC
¢ page 118, as soon as your
ve hicle has reached a speed of 1 mph (2 km/
h) .
Situ ation s re quiring dri ver int ervention
In some s ituations you w ill have to use the
footbrake to s low the vehicle down in order to
keep a safe distance from vehicle in front of
you or to avo id a rear-end coll is ion. In this sit­
uation, a symbol appears and a warning tone
sounds
¢ page 124.
Ada pti ve crui se control 115
Passing another vehicle
If you move in to the passing lane and no ve hi­
cle is detected ahead, the adaptive cr uise con­
trol acce le rates to the speed you have set and
maintains it.
Overr iding ACC
You can in cr ease yo ur speed at a ny time by
stepping on the accelera tor ped al. A fter you
release the accelerator peda l, the system ad­
justs back down to the speed you prev ious ly
set .
Reducing stopp ing distance
If the radar sensor detects that the d istance
to the vehicle a head is less than de fined m ini­
mum distance, the brakes are automatically
prepared fo r emergency braking by the driver .
The brake pads are moved very close to the brake d iscs without actually braking the vehi­
cle. This brake assistant feature reacts more
quick ly to the dr ive r's brak ing, and also works
when adapt ive cruise control is off . The stop­
ping distance is reduced as a result of th is ad­
vance brake p reparation . Th is fun ction does
not perform any emergency b rak ing mane u­
vers by itse lf; the dr iver mus t always apply the
brakes.
A WARNING
If ACC initiates a braking maneuver, the brake pedal w ill be retracted. Inter ference
with the brake peda l can prevent ACC from
slowing the veh icle down and cause a
crash and serious personal injury.
- Never put anything in the driver's foot­
well or let anyth ing fall into it. An object
in the driver's footwe ll can interfe re with
the peda ls and prevent the acce le rator
from being used to override ACC or pre­
vent ACC from being switched off when
the brake pedal is depressed and also
prevent the vehicle from being slowed
down or stopped .
- On ly use floor mats that keep the area
around the peda ls free and that can be
securely fastened to the footwell .
-

222 Intelligent technology
To ensure that the ASR works properly, all
four wheels must be fitted with identical
tires. Any differences in rolling rad ius of
the t ires can cause the system to reduce
engine power when this is not desired. See
also¢
page 285, New tires and replacing
tires and wheels.
Braking
General information
What affects braking efficiency?
Operating conditions and driving habits
The brakes on today's automob iles are st ill
subject to wea r, depending la rgely on operat­
ing cond itions and dr iv ing habits
Q ,& . On ve­
hicles that are eithe r driven mostly in stop­
and -go city traffic or are driven hard, the
brake pads should be checked by your author­
ized Audi dealer more often than specified in
the
Warranty & Maintenance booklet . Failure
to have your brake pads inspected can result
in reduced brake performance .
On steep slopes, you shou ld use the braking
effect of the engine. This way, you prevent un­
necessary wear on the brake system. If you
must use your brakes, do not hold the brakes
down continuously . Pump the brakes at inter­
va ls.
Noises may occur when braking depending on
the speed, braking force and outside condi­
tions such as temperature and humidity.
Moisture or road salt
Under certain conditions, for examp le, when
driving through water or very heavy rain, or
even after washing your vehicle, the braking
effect can be reduced due to moisture (or in
freezing conditions ice) on the brake pads. A
few careful brake applications should dry off
the brake pads o r remove any ice coatings.
When you are driving at higher speeds with
the w indshield wipers on, the brake pads will
brief ly touch the brake discs in regular inter- vals so as
to improve reaction time when brak ­
ing on wet surfaces . You, the driver, will not
notice anything.
T he effect iveness of the brakes can be reduced
when the vehicle is driven on a sa lt-covered
road and the brakes are not used . Here too,
you should clean off accumulated sa lt coating
from brake discs and pads w ith a few careful
applications of the brake¢,&.
Corrosion
There may be a tendency for dirt to build up
on the brake pads and corrosion to form on
the discs if the car is not driven regu larly or
only for short trips w ith litt le use of the
brakes.
If the brakes are not used frequently, or if cor­
rosion has formed on the discs, it is advisable
to clean off the pads and discs by braking
firmly a few times from a moderately high
speed
c> ,& .
Faults in the brake system
If you shou ld notice a sudden increase in
brake pedal trave l, then one of the two brake
c ir cuits may have fa iled
c> ,& .
Low brake fluid level
Malfunctions can occur in the brake system if
the brake fluid level is too low. The brake fluid
l evel is monitored electronically .
Brake lining wear status
Brake lining wear may be checked by visual in­
spect ion of the condition of the brake pads
through the openings in the wheel. If neces­
sary, the wheel may be removed for this in­
spect ion
c> page 298, Changing a wheel.
A WARNING
-- You shou ld perform braking maneuvers
for the purpose of cleaning the brake
system only if road conditions permit.
Other road users must not be put at risk -
you may cause an accident!

-Before descending a steep grade, reduce
speed and shift transmiss ion into a lower
gear or lower driving range. Do not ride
the brakes or hold the pedal down too
long or too often. This could cause the
brakes to get hot and dimin ish braking
efficiency.
- Do not "r ide the brakes" by resting your
foot on the pedal when you do not intend
to bra ke. Th is may cause the brakes to
overheat, prema ture wear and increased
stopping distance .
- Under certain climat ic and operating
condit ions such as passing through wa­
ter, driving in heavy rain or after washing
the vehicle, the effectiveness of the
brakes can be reduced . In winter, ice can
accumulate on the brake pads, linings,
discs and drums. Carefully apply brakes
for a test . Brakes will dry and ice coat­
ings will be cleaned off after a few care­
ful brake applications.
- Driv ing for an extended period of time on
salt-covered roads w ithout us ing your
brakes can also affect braking efficiency .
Clean off accumulated salt coating from
brake discs and pads w ith a few caref ul
brake applicat ions.
- If you damage the front spoiler, or if you
install a different spoiler, be sure the air
flow to the front brakes is not obstruct ­
ed. Otherwise the brake system co uld
overheat reducing the effectiveness of
the entire brake system.
- Failure of one brake circuit will impair
the braking capability resulting in an in­
creased stopp ing distance. Avoid driv ing
the vehicle and have it towed to the near­
est author ized Audi dealer or qualified
workshop .
Brake booster
The brake booster adds extra braking power.
The brake booster works with vacuum pres­
sure which is created only when the engine is
running¢ &,.
Int ellig ent technolog y 223
A WARNING
-Never let the veh icle roll to a stop with
the engine shut off .
- If the brake booster is not working, for
example when towing your vehicle, or because the brake booster has somehow
been damaged, the brake pedal must be
pressed considerably harder to make up
for the la ck of booster assistance .
Functioning of Anti-Lock Brake System
(ABS)
ABS prevents the wheels from locking up un­
der braking.
T he ABS contributes effect ively to vehicle con­
trol s ince it preve nts the whee ls from
locking
when the brakes are applied. This means that
the vehicle remains steerable and is less likely
to skid .
With ABS y ou do not nee d to pump the
bra ke. Just h old t he br ake ped al d own .
However, do not expect the ABS to shorten
braking distance under
all circumstances.
When dr iving on g ravel or on new ly fallen
snow o n top of icy s urfaces, braking dis tance
may be even longer, therefore, under these
circumstances, it is especia lly important that
you drive s low ly and wit h great care.
How the ABS s ystem works
An a utomat ic check is made when a speed of
about 12 mph (20 km/h) is reached . When
th is happens, a pumping noise can be heard.
If an ind iv idual whee l begi ns to rotate too
s low ly in relation to vehicle speed and tends
to lock, the ABS automatically reduces brake
pressure to prevent tha t whee l from locking .
T his automatic adjustment p rocess will cause
a
sli ght vibrati on of the brake pedal and some
no ises to a le rt you that ve hicle speed m ust be
adapted to existing road and traffic condi ­
tions. •
•

228 Driving and environment
Driving and
environment
The first 1,000 miles
(1,500 km) and
afterwards
New engine
The engine needs to be run-in during the first
1,000 miles (1,500 km).
For the fir st 600 miles (1,000
kilometers):
.,. Do not use full throttle.
... Do not drive at engine speeds that are more
than 2/3 of the maximum permitted RPM.
From 600 to 1,000 miles (1,000 to
1,500 kilometers):
.,. Speeds can gradually be increased to the
maximum perm iss ible road or engine speed .
During and after break-in period
... Do not rev the engine up to high speeds
when it is cold. This applies whether the
t ransmission is in N (Neutral) or in gear.
After the break-in period
... Do not exceed maximum engine speed un­
der any circumstances.
... Upshift into the next higher gear
before
reaching the red area at the end of the tach­
ometer scale¢
page 10.
During the first few hours of driving, the en­
gine's internal friction is higher than later
when alt the moving parts have been broken
in. How welt this break-in process is done de­
pends to a considerable extent on the way the
vehicle is driven during the first 1,000 miles
(1,500 kilometers).
(D Note
Extremely high engine speeds are auto­
mat ica lly reduced . However, these rpm
lim its are programmed for an engine welt
run- in, not a new engine.
{® For the sake of the environment
Do not drive with unnecessarily high en­
gine speeds - upshifting ear ly saves fuel,
reduces noise and protects the environ­
ment.
, New tires
If your vehicle is running on new tires, drive
part icularly careful for the first 350 miles
(500 kilometers) after fitting.
A WARNING
New tires tend to be slippery and must al­
so be "broken -in". Be sure to remember
this during the first 350 miles (500 kilo­
meters). Brake gently. Avoid following
closely behind other vehicles or other sit­
uations that might require sudden, hard
braking.
New brake pads
Remember that new brake pads do not have a
full brak ing effect dur ing the first 250 m iles
(400 kilometers) after they are insta lled.
New brake pads have to be "burnished in" be­
fore they have optimal grab¢
A.
During the break- in period, you should avoid
putting severe loads on the brakes. Severe
loads include, for example, sudden hard brak­
i ng, in particular at very high speeds or, for
example, on mountain passes .
A WARNING
New brake pads don't have the best stop­
ping power and must be "broken-in" dur­
i ng the initia l 100 to 150 miles (150 to
200 kilometers) of normal city driving. You
can compensate for this by pressing the
brake pedal more firm ly. This also applies
later when new pads are installed.

234 Driving off road
If the vehicle threatens to tip over when
driving across a slope, you must immediate­
ly steer downhill in the di rection of the
slope.
D o not par k your veh icle on steep slopes or
g rades .
T o reduce t he risk of tippi ng over, dr ive o n
slopes in the d irection o f the downwa rd slope
(fa ll line) -
not cros swise .
A WARNING
After drivin g through wate r, m ud, slush ,
etc ., the brakes may be slow to take effect
because of wet brake roto rs and pads. Dry
the brakes f irst by braking carefully to re­
sto re the full braking effect.
-
(D Note
Vehicle components s uch as the engine,
transmiss io n, suspension or elect rical sys ­
tem can be severely damaged by drivi ng
thr ough wat er.
(1) Tips
- Check the depth of the wate r before dr iv­
i ng th rough it.
- Do not stop the veh icle, dr ive in reverse
or switc h the engine off whe n driving
t hr ough water .
- Keep in mind that oncoming vehicles may create waves that raise t he water
l eve l a nd make it t oo deep fo r yo ur vehi­
cle to dr ive th rough safely.
- Avoid dr iving thro ugh salt water because
i t can ca use corrosion.

268 Checking and filling
-If you drain the coolant, it must be
caught and safely stored in a proper con­
tainer clearly marked "poison".
(D Note
- Coolant pollutes the environment and
could cause an engine fire . Excess cool-
ant will be forced out through the pres­
sure relief valve in the cap when the en­
gine becomes hot.
- If, in an emergency, only water can be
added , the correct ratio between water
and antifreeze
c:::> page 265 must be re­
stored as soon as possible .
@ For the sake of the environment
Drained coolant should not be reused. Al­
ways dispose of used coolant while observ­ ing all environmental regulations.
Radiator fan
The radiator fan switches on automatically by
itself
The radiator fan is driven by the engine via the
V-belt . The viscous clutch regulates the speed
of the fan accord ing to the temperature of the
coolant.
An auxiliary electric radiator fan* switches on
and off depending on coolant temperature
and other vehicle operating conditions.
After you switch the engine off, the aux iliary
fan can continue running for up to 10 minutes
- even with the ignition off. It can even switch
on again later by itself
c:::> &. , if
- the temperature of the engine coolant rises
due to the heat build-up from the engine in
t he engine compartment, or
- the engine compartment heats up because
the vehicle is parked in intense sunligh t.
_&. WARNING
- To reduce the risk of personal injury nev­
er touch the radiator fan. -
The auxiliary electric fan is temperature
controlled and can switch on suddenly
even when the engine is not running.
- The auxiliary radiator fan switches on au­
tomatically when the engine coolant reaches a certain temperature and will
continue to run until the coolant temper­
ature drops.
Brake fluid
Checking brake fluid level
The brake fluid level can be checked with a
quick glance.
Fig. 234 E ngine compart men t: cove r on the brake fluid
reserv oir
Before you check anyth ing in the engine com­
partment,
always read and heed all WARN­
INGS c:::> _&. in Working in the engine compart­
ment on page 258.
.,. Read the brake fluid level from the brake
fluid reservoir
c:::> fig. 234, c:::> page 260,
fig.
229. The brake fluid level m ust be be­
tween the "MIN" and "MAX" markings.
The brake fluid reservoir is located at the rear
partition of the engine compartment on the
left side
c:::> page 260.
The fluid level may drop slightly after some
time due to the automatic adjustment of the
brake pads. This is not cause for alarm.
If the brake flu id level falls
considerably be­
low the
"MIN " mark, the brake warning/indi­
cator light ( U.S. models: -· Canadian
models :. ) w ill come on
c:::>page 19 and
c:::>page 32. Do not continue to operate the ve-
hicle. The compl ete brake system should be ..,.

326 Index
Brake system .. .... ..... ... .. .. .... . 268
Anti-lock brake system . ... .. ... ... .. 1 8
Bra ke fl uid .... ... .... ... .. .. .... . 268
Brake fl uid spec ificat ions for refill and re-
p lacement ... ............. .. .... . 269
Brake pads . .............. ... .. ... 228
Ge ne ral informat ion ... ... .. .. .. .. . 222
H ow does mo isture or road salt affect the
b rakes? .. .. ............. .... .. .. . 22 2
M alfunct io n ............. .. .. .... .. 3 2
P ark ing brake ... ...... ... .. .. .... . 109
Warning/indicator lights ... .. .. .... . . 19
Worn brake pads symbol ... .. ... ... .. 36
B raki ng gua rd
refer to Audi br aking gua rd . .. .. .. .. . 126
Break- in period . .. ...... .... ... .. .. . 228
Brake pads ... .. ...... .... ... .. .. . 228
Tir es .. .. .. ................ ... ... 228
Breakover ang le ........... .... .... . 232
B ulbs . .. .. ... ............ .. .. .. .. . 30 6
Bumper cover Ca ution w hen parki ng nea r a parking ba r-
ri er or curb . ... .. ..... ... .. .. .. .. . 110
C
Ca lifo rnia Proposit ion 65 Wa rning .. ... 259
B attery spec ific .... ...... .. .. .. .. . 27 1
Capac it ies . .. ............. .. .. .. ... 316
C ar -Systems
Ambience lighting . . . . . . . . . . . . . . . . . . 62
Lighting profi les .. ..... ... .. .. .... .. 62
Ca r ca re . .. .. ................ ... .. . 239
I n ter ior . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4
Pl asti c and v inyl .......... .. .. .. .. . 24 2
Care of exte rior .. .... .... .. .. .. .. .. . 239
Cargo area
refer to loading the luggage compart-
ment .. .. ................. .. .... . 166
C ar go floor ............... .. .. ...... 8 2
Cargo net .... .. ........ .... ... .. .. .. 80
Cata lytic converter . ..... ... .. .. .... . 229
Cente r arm rest
Cup holder . . . . . . . . . . . . . . . . . . . . . . . . 77
S to rage compartment . . . . . . . . . . . . . . . 7 7
Center console in rear ........ ... .. .... 78 Cen
tral lock ing
Emergency locking . .... ..... ... .. .. . 45
Pano ram ic s liding s unroo f . . . . . . . . . . . . 55
Certification .. .. .. ............. .. .. 3 22
Chang ing a flat t ire . .. .. ...... ... .. .. 298
Chang ing a wheel . .... .. ..... ... .. .. 298
Chang ing engine oil 264
Chassis Undercoating .... ............. .... 244
also refer to Adaptive Air Suspen-
s io n . . . . . . . . . . . . . . . . . . . . . . . . 150, 152
CHECK button ..... ... .. ..... ... .. .. . 12
Checking En gine coolant level ............ .. .. 266
Checking t ire pressure ........ ...... . 280
Child rest raints
Danger of using child restraints in the
front seat . ................... .... 181
Where can I get additional informat io n
about child rest raints and the ir use? .. 218
Child rest raint system anchors . ... .. .. 212
Child safe ty . ...... ............. .... 200
Co nvertib le lo cking retractor ... .. .. .. 209
G ui dance fixtures for lower ancho rages 214
Important sa fe ty instru ctions for using
child safety seats .... .. ..... ... .. .. 203
Important things to know when driving
with children .. .. ... .......... .. .. 200
Installing a c hild restra int using the
LATCH system .. .. .......... ...... . 215
Mounting and releasing the anchorage
hook ........ ... .. .............. . 215
T e ther anchors ... ............. .... 216
T e ther s traps .... ............. .... 216
Child safety lock
r ear doors (powe r) . . . . . . . . . . . . . . . . . . 48
Child safety seats . ... .... .... ... .. .. 205
Booster seats .... ............. .... 208
Co nvertib le child seats ......... .. .. 206
Co nvertib le locking retractor ... .. .. .. 209
Danger of using child restraints i n the
front seat ..... .. .......... ... ... . 181
How do I properly i nstall a chi ld safe ty
seat in my ve hicle? ............. .. .. 203
Infan t seats ... .. .. .... .... ... .. .. 205
Installing ..... .. .. ... ..... ... .. .. 209