ABS AUDI R8 SPYDER 2012 Owners Manual

12 Instrum ent s and w arn ing /indic ato r light s
Safety belt
•
Check engine oil level
¢page 14
¢page 18
ii
Generator./
Engine oil sensor malfunction
¢page 14
¢page 18 '
D
Engine oil pressure too low
•
Battery voltage too h igh or too low
¢page 14
¢page 18
Engine coolant level too low/
II
Low fuel level
engine coolant temperature too
¢page 18
high¢ page 15
m
Windshield washer fluid level low
Yellow indicator lights ¢ page 18
Yellow symbols indicate a priority 2 ma lfunc-
~:)
Defective light bulb
tion -Warning!
¢page 18
11
Convertib le top ope ration
•
USA model s: Defective brake light
¢page 15
¢page 18
I]
Electronic Stability Control (ESC) ./
6
Canada models: Defective brake
¢page 16 light¢ page 18
-
I
Electronic Stab ility Control (ESC) ./
m
Light/rain sensor defe ctive (a utomat-
¢ page 16 ic headlights)* defective ¢ page 19
~ USA models: anti-lock brake system
(ABS) ./ defective ¢ page 16
B
Audi magnetic ride
¢page 19
•
Canada model s: anti-lock brake sys-
E
Rear spoiler./
tern (ABS)./ de fec tive ¢
page 16
¢page 19
•
Worn brake pads
~
USA model s: Speed warning 1
¢page 17
¢page29
g
Tire pressu re too low
•
Canada models : Speed warning 1
¢page 201
¢page29
I Tire pressure monitoring system
~
USA models: Speed warning 2 111115' 200
¢ page
¢page29
rm
Electronic power con trol ./
Canada models : Speed warning 2 ¢page 17
•
¢page29
B
USA models: Malfunction Indicator
Lamp (MIL)¢
page 17 Selector lever defective*
No reverse gear*
g
Canada models: Ma lfunction lndica-¢page 19
tor Lamp (MIL) ¢ page 17 ffl;O Clutch is overheating*
.,
Engine speed limitation* ¢page 19
¢page 17
R
Gearbox malfunction*
¢page 19

Instruments and warning/indicator lights 13
Other indicator lights
•
II
CRUISE
•
•
Turn signals
¢page20
USA models: Cruise control acti ­
vated
¢ page 20
Canada models: Cru ise cont rol ac­
tivated
q page 20
High beam
¢page 51
BRAKE/ This warning/indicator light illuminates when
the brake fluid level is too low or when there
is a malfunction in the ABS, or when the park ­
ing brake is set.
If the - (USA models)/ . (Canada
models) symbol flashes in the disp lay with the
parking brake released, there is a ma lfuncti on
in the brake system . In addition to the sym­
bol, one of two messages appears in the dis­
play:
Stop vehicle and check brake fluid level
Stabilisation program and ABS fault! See
Owner's manual
.. Pull off the road and stop the vehicle.
.. Obtain professional ass istance.
USA models: if there is a malfunction in the
ABS system, the
r.1il warning/indicator light
illuminates along with the - system
malfunct ion warn ing/ indicator light
q ,&..
Canada models: if there is a malf unction in
the ABS system, the
ll] warning/ind icator
light illuminates together with the. brake
system malfunction warning/indicator light
c::>,&. .
The light - (USA)/ . (Canada) illumi­
nates when the ign ition is turned on . It goes
out after the engine has been started and the
parking brake is fu lly released . This indicates that the brake
warning light is functioning
properly.
If the brake warning light does not light up
when the engine is cranking or the parking
brake is applied, there may be a malfunction
in the electrical system. In this case, contact
your Audi deale r.
If the ABS fails, the ABS warn ing/ indicator
light
r.1il (USA models) /ll] (Canada models)
flashes together with the brake system warn­ ing/ indicator light
i:::> .&..
(USA mode ls): If the warn ing light - and
the warning light
EiJ illuminate together, im­
mediate ly contact your authorized Audi dea ler
or qualified workshop to have all brake pads
inspected
i:::> page 17.
When the light comes on, an audible warning
signal is also given.
Parking brake set
The pa rk ing brake war ning ligh t-·
(Canada models) illuminates when the park­
ing brake is set. In addition, a warning tone
will sound after you have driven for longer
than 3 seconds and faster than 3 mp h (S km/
h).
Parking brake set
The - warning/ indicator light illuminates
when the parking brake is set
i:::> .&. .
A WARNING
-Always observe the warnings in
¢ page 169, Working in the engine
compartment,
before opening the en­
gine hood and checking the brake fluid.
- Driving with low brake fluid is a safety
hazard! Stop the car and get profess ional
assistance.
- USA models:: If both, the 1111 warning
light and
the m warning light come
on at the same time, the rear wheels
could lock up first under hard braking.
Lock-up of the rear wheel brakes can
cause loss of vehicle cont rol and an acci­
dent. Have your vehicle repaired

14 Instrum ent s and w arn ing /indic ato r light s
immediately by your authorized Audi
dealer or a qualified workshop. Dr ive
slowly and avoid sudden, hard brake ap­ plicat ion.
- Canada models: If both, the brake warn­
ing light . and the ABS warning light
Ii] come on at the same t ime, the rear
wheels could lock up first under hard braking. Lock-up of the rear wheel brakes
can cause loss of vehicle control and an
acc ident. Have you r vehicle repaired im­
med iately by your authorized Audi dealer
or a q ualified workshop. Drive slowly and
avoid sudden, hard brake application
- If the brake warning/indicator light does not go out after a few seconds and the
park ing brake re leased, or lights up while
you are driving, the fluid level in the brake flu id reservo ir is too low. If you be­
lieve that it is safe to do so, proceed im­
med iately at low speed to the nearest
authorized Audi dealer o r qualified work­
shop and have the bra ke system inspect­
ed.
- Always keep in m ind that afte r several
brake applicat ions, yo u will need g reater
pressure on the b rake peda l to s top your
vehicle. Do no t re ly on stra ined brakes to
respond with maxim um stopping power
in critical situations . You must allow for
increased brak ing distances. The extra
distance used up by fad ing brakes could
lead to an acc ident.
~ / ! .!r Safety systems
The I (USA models)/ . (Canada mode ls) in­
d icator light monitors the safety systems e.g.
a ir bags, pretensioners a nd illum inates for a
few seconds each time you switc h the ign ition
on.
If the
I (USA models)/ . (Canada models)
indicator light does not go out, or if it illumi­
nates w hile you are driv ing, or if it sta rts to
b link , then there is a ma lf u nction somewhere
in the system. If the light does not illuminate
when you switch on the ignition, this also
means there is a ma lfunction.
A WARNING
If you have a ma lfunction in the safety sys­
tems, contact your authorized Audi dea ler
i mmediately. Othe rwise the safety sys­
tems may not work properly in an acc i­
dent.
4 Safety belt warning light
App lies to veh icles : w ith safe ty belt warni ng l ig h t
The warning light is a reminder to fasten
safety belts .
The warning lig ht . comes on for a few sec­
onds after the ignition is sw itched on as a re ­
minder to fasten you r safety belt .
Additional informat ion on safety belts
r::> page 101.
D Generator '
This warning/indicator light detects a mal ­
function in the generator or in the vehicle 's
electrical system.
The . warning/indicator light i llum inates
when you switch on the ignition and must go
out after the eng ine has started.
If the . warning/indicator light illuminates
whi le you are driving, you sho uld contact your
authorized Aud i dea le r. Since the vehicle bat­
tery is discharging, you shou ld sw itch
off any
unnecessary electr ica l consumers (for exam ­
ple, the air conditioner) .
~ Engine oil pressure
The red engine oil pressure warning symbol
requires immediate service or repair .
If the . symbo l appears in the d isplay and
flashes, the o il pressure is too low . In add ition
to the symbol, the following message a lso ap­
pears in the display:
Switch off engine! Oil pre ssure is too low
.. Pull off the road and stop the vehicle.
.. Shut the engine down.
.. Check the engine oil leve l¢
page 174.

16 Instruments and warning/indicator lights ;;./~ Electronic Stability Control (ESC )
If the J;.j indicator lamp blinks while dr iv ing,
the ESC or ASR (Ant i-S lip Regulation) is active­
ly regulating .
If the
J;.j indicator lamp illuminates, the sys­
tem has switched the ESC off. In this case, you
can switch the ignition off and then on to
switch the ESC on again. The system is func­
tioning comp letely when the indicator lamp
switches off .
If the
I) indicator lamp illum inates, the ESC
was switched off with the
[fil button.
Stabilisation program and ABS fault! See
owner 's manual
If the D.] indicator lamp and thP ¢4:)'A ABS indi ­
cator lamp illumi nate and the dr iver message
appears, the ABS or electronic differential lock
is malfunctioning. This also interrupts the
E SC. The brakes still function with their nor­
mal power, but ABS is not active.
Drive to your authorized Aud i dealer immedi­
ate ly to have the malfunction corrected.
For more informat ion about the ESC
r:::;, page 142.
ABS/(@) Anti-lock brake system
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL) .
The warning/indicator light m (USA mod­
els)
;fl] (Canada models) will come on for a
few seconds when the ignition is switched on.
The light will go out after an automatic check
sequence is completed .
There is a malfunction in the ABS when:
-The warning/indicator light does not illumi­
nate when you switch the ign ition on.
- The warning/indicator light does not go out after a few seconds .
- The warning/indicator light illuminates
wh ile driving.
The ESC indicator light also illuminates if
there is a malfunction in the ABS . The mes- sage
Stabilisation program and ABS
: fault!
See owner's manual
also appears in the in­
strument cluster display and a warning tone
sounds.
The brake system will still respond even
without the assistance of the ABS system.
See your authorized Audi dealer as soon as
possible to restore full braking performance.
For more information regarding the ABS
c:>page 142.
Malfunction in the brake system
If the brake warning light c:>page 13 and the
ABS warning illuminate
together there may be
a malfunction in the ABS, and there may also
be a malfunction in the brake system itself
c> ,&.. The ABS will not work and you will no­
tice a change in braking response and per­
formance.
In the event of a malfunction in the brake
system
the warning/ind icator light _
( U SA mode ls)/ . (Canada models) in the in­
strument cluster flashes
r:::;, page 13.
Malfunction in the electronic differential
lock (EDL)
The EDL works together w ith the ABS . The
ABS warning light wi ll come on if there is a
malfunction in the EDL sys tem
r:::;, page 142.
See your authorized Audi dealer as soon as
possible .
8_ WARNING
-If the m (USA models)@ (Canada
models) warning light does not go out,
or if it comes on whi le driving, the ABS
system is not work ing properly. The vehi­
cle can then be stopped only wit h the
standard brakes (without ABS). You w ill
not have the protection ABS provides.
Contact your Audi deale r as soon as pos­
sible.
- USA models: If the - warning light,
the
Jj) warning light and them warn­
ing light come on together, the rear
wheels could lock up fir st under hard
braking. Rear whee l lock-up can cause
~

Instrument s and warnin g/indic ator ligh ts 17
loss of vehicle control and an accident.
Have your vehicle repaired immediately
by your authorized Aud i dealer or a quali­
fied workshop . Drive slowly and avoid
sudden, hard brake applications.
- Canada models: If the brake warn ing
light ., the
DJ warning light and the
ABS wa rning light
rii] come on together,
the rear wheels could lock up first unde r
hard bra king. Rear wheel lock-up can
cause loss of vehicle control and an acci­
dent. Have yo ur vehicle repaired immed i­
ately by your authorized A udi dealer or a
qualified workshop . Drive slowly and
avoid sudden, hard brake applicat ions.
(0 ) Worn brake pads
r;J Check b rak e pads!
If the warning light illum inates, immediately
contact your authorized A udi dealer or quali­
fied workshop to have all brake pads inspect­
ed. On USA models the warning light
r;J
comes on together with the war ning light
- · Both sets of brake pads on an axle
must always be replaced at the same time .
A WARNING
Driv ing with bad brakes can cause a coll i­
sion and serious personal injury .
- If the warning light
r;J and the warning
light -
1l with the message Brake
p ad s!
comes on in the i nstr ument cluster
display, immedia tely contact your au­
tho rized Audi dea le r or qualified work­
shop to have a ll brake pads checked or
replaced if necessary.
EPC Electronic power control
This warning/indicator light monitors the
electronic power control.
The ~ warn ing/ indica to r light ( Elect ronic
P ower Control) illumina tes when you swi tch
on the ignition as a function check.
1) - : USA mod els only
-
(D Tips
If this warn ing/indicator light illuminates
while yo u are driving, then there is a mal­
funct ion in the engine electronics. Have
the malfunct ion corrected as soon as pos­
s ible by your authorized Audi dealer or
qualified workshop .
~ Malfunction Indicator Lamp (MIL)
The Ma lfunction Indicator Lamp (MIL) is pa rt
of the On-Board Diagnostic (OBD II) system.
T he symbo l
lffl ligh ts up when the ignit ion is
turned on and will turn off after the eng ine
has started and has settled at constant id le
speed. This indicates that the MIL is working
proper ly.
T he warning light ill uminates when there is a
malfunction in the engine electronic system .
Contact your authorized Audi dea ler and have
the malfunct ion corrected.
An improperl y clo sed fu el filler cap ma y als o
c a use the MIL light to illuminate
¢ page 166 .
For more information ¢page 22.
!?') Engine speed limitation
Ma ximum 6000 RPM
The eng ine speed is automatically limited to
6000 RPM. This protects the engine from
overheating .
The eng ine speed limitation
(ll deactivates
once the eng ine is no longe r in the cr itica l
temperature range and yo u have re leased the
acce le rator pedal once.
(D Tips
When co ld, the engine speed is limited to
6000 RPM (w ith the
VlO engine) or
7000 R PM (with the VB engine) to protect
the engine. The limit is deactivated once
the oil temperature rises above 140 °F

88 Homelin k®
Homelink ®
Universal remote
control
General information
The Homelink universal remote control can
be programmed with hand-held transmitters
from existing equipment.
You must first program the Homelink ® trans­
mitter before you can use the system
~ page 88, Programming the Homelink ®
transmitter.
In order to program the Homelink® transmit­
ter for devices utilizing rolling code, a second person on a ladder who can safely reach the
garage door opener motor is recommended.
It is also necessary to locate the "learn" but­
ton on your garage door opener motor . Refer
to the operating instructions for the opener,
as the location and color of this button may
vary by manufacturer .
You can still use the original remote control
for the device at any time.
A WARNING
-
- Never use the Homelink® transmitter
with any garage door opener that does
have not the safety stop and reverse fea­
ture as required by federal safety stand­
ards. This includes any garage door open­
er model manufactured before April 1,
1982.
- A garage door opener which cannot de­
tect an object, signaling the door to stop
and reverse does not meet current feder­
al safety standards. Using a garage door
opener without these features increases
risk of serious injury or death.
- For safety reasons never release the
parking brake or start the engine while
anyone is standing in front of the vehicle.
- A garage door or an estate gate may
sometimes be set in motion when the
Homelink ® remote control is being pro­
grammed. If the device is repeatedly ac- tivated, this can overstrain motor and
damage its electrical components
-an
overheated motor is a fire hazard!
- To avoid possible injuries or property
damage, please always make absolutely
certain that no persons or objects are lo­
cated in the range of motion of any
equipment being operated.
{!) Tips
- If you would like more information on
Homelink ®, where to purchase the
Homelink ® compatible products, or
would like to purchase the Homelink®
Home Lighting Package, please call toll­
free: 1-800-355-3515.
- For Declaration of Compliance to United
States FCC and Industry Canada regula­
tions ~
page 222.
Programming the Homelink ®
transmitter
The transmitter is programmed in two phas­
es. For rolling code transmitters, a third
phase is also necessary.
~----------------- ~ ,:.
~
Fig. 101 Overhead console: Homeli nk® keypad
I
'-..~0000 - - ,r.;-_ - -
Fig. 102 Fro nt bumper , driver side : loc ation of trans -
mi tter unit ..,_

102 Safety belts
-Failure to pay attention to the warning
light that comes on could lead to person­
al injury.
Why safety belts?
Safety belts protect
People think it's possible to use the hands to
brace the body in a minor collision. It's simply
not true!
Fig. 111 Driver is properly restrained in a sudden brak ­
i ng maneuve r.
Safety belts used properly can make a big dif­
ference. Safety belts help to keep passengers
in their seats, gradually reduce energy levels
applied to the body in an accident, and help prevent the uncontrolled movement that can
cause serious injuries. In addition, safety belts
reduce the danger of being thrown out of the
vehicle .
Safety belts attach passengers to the car and
give them the benefit of being slowed down more gently or "softly " through the "give" in
the safety belts, crush zones and other safety
features engineered into today's vehicles. By
"absorbing " the kinetic energy over a longer
period of time, the safety belts make the
forces on the body more "tolerable" and less likely to cause injury.
Although these examples are based on a fron ­
tal collision, safety belts can also substantial­
ly reduce the risk of injury in other kinds of
crashes. So, whether you're on a long trip or
just going to the corner store, always buckle up and make sure others do, too. Accident sta­
tistics show that vehicle occupants properly
wearing safety belts have a lower risk of being injured and a much better chance of surviving
an accident. Properly using safety belts also
greatly increases the ability of the supplemen­
tal airbags to do their job in a collision . For
this reason, wearing a safety belt is legally re­
quired in most countries including much of
the United States and Canada.
Although your Audi is equipped with airbags,
you still have to wear the safety belts provid­ ed . Front airbags, for example, are activated
only in some frontal collisions . The front a ir­
bags are not activated in all frontal collisions,
in side and rear collisions, in roll overs or in
cases where there is not enough deceleration
through impact to the front of the vehicle.
The same goes for the other airbag systems in
your Audi. So, always wear your safety belt
and make sure everybody in your vehicle is
properly restrained!
Important safety instructions about
safety belts
Safety belts must always be properly posi­ tioned across the strongest bones of your
body .
.,. Always wear safety belts as illustrated and
described in this chapter .
.,. Make sure that your safety belts are always
ready for use and are not damaged.
_&. WARNING
Not wear ing safety belts or wearing them
improperly increases the r isk of serious
personal injury and death. Safety belts can
work only when used correctly.
-Always fasten your safety belts correctly
before driving off and make sure all pas­
sengers are properly restrained.
- For maximum protection, safety belts
must always be positioned correctly on
the body.
- Never strap more than one person, in­ cluding small children, into any single
safety belt.
- Never place a safety belt over a chi ld sit­
ting on your lap.

-Always keep feet in the footwell in front
of the seat while the vehicle is being driv­
en .
- Never let any person ride with feet on
the instrument panel or sticking out the
window or on the seat.
- Never remove a safety belt while the ve­ hicle is moving. Doing so will increase
your risk of being injured or killed .
- Never wear belts twisted.
- Never wear belts over rigid or breakable
objects in or on your clothing, such as
eye glasses, pens, keys, etc., as these
may cause injury.
- Never wear the shoulder part of the belt
under your arm or otherwise out of posi­
t ion .
- Several layers of heavy clothing may in­
terfere with correct positioning of belts
and reduce their effectiveness .
- Always keep belt buckles free of anything
that may prevent the buckle from latch­
ing securely .
- Never use comfort clips or devices that
create slack in the shoulder belt. Howev­
er, special clips may be required for the
correct use of some chi ld restraint sys­
tems.
- Never allow safety belts to become dam­
aged by being caught in door or seat
hardware.
- Torn or frayed safety belts can tear and
damaged belt hardware can break in an
accident. Inspect belts regularly.
If web ­
bing, bindings, buckles, or retractors are
damaged, have belts replaced by an au­
thorized Audi dea ler or qualified work­
shop.
- Safety belts that have been worn and
loaded in an accident must be replaced
with the correct replacement safety belt
by an authorized Audi dealer or qualified
workshop . Replacement may be necessa ­
ry even if damage cannot be clearly seen.
Anchorages that were loaded must also
be inspected .
- Never remove, modify, disassemble, or
try to repair the safety belts yourself.
Safety belts 103
-Always keep the belts clean. Dirty belts
may not work properly and can impair
the function of the inertia reel
c:> page 162, Safety belts .
Illustrating the
principle of an accident
Frontal collisions and the law of physics
Frontal crashes creat e very strong forces for
people riding in vehicles .
Fig. 112 Unbelted occupants in a vehicle heading for a
wa ll
Fig. 113 The ve hicle c rashes in to the wal l.
The physical principles are simple. Both the
vehicle and the passengers possess energy
which vari es with vehicle speed and body
weight. Eng ineers cal l this energy "k inetic en­
ergy."
The higher the speed of the vehicle and the
greater the vehicle's weight, the more energy
that has to be "absorbed" in the crash.
Vehicle speed is the most significant factor.
If
the speed doubles from 15 to 30 mph (25 to
50 km/h), the energy increases 4 times!
Because the occupants in this vehicle are not
using safety belts
c:> fig. 112, they will keep
moving at the same speed the veh icle was .,,_

- Improper installation of child restraints can reduce the ir effectiveness or even
prevent them from prov iding any protec­
t ion.
- An improperly installed child restraint can interfere with the airbag as it de­
ploys a nd serio usly injure or even kill the
child -even with an Advanced Airbag
System.
-Always follow the manufacturer's in­
struct ions provided with the child saf ety
seat or car rier carefully.
- Never place additional items on the seat
that can increase the to tal weight regis­
tered by the weight-sens ing mat a nd can
c a use i nju ry in a c rash.
Front airbags
Descript ion of front airbags
The airbag system con provide supplemental
protection to properly restrained front seat occupants.
Fig. 120 Locatio n of drive r air bag: in steer ing wheel
F ig. 121 Location of fro nt passe nger 's a irbag: in th e in­
strument panel
Your veh icle is equipped w ith an "Advanced
Airbag System" in compliance with United
States Federal Motor Vehicle Safety Standard
A irba g sy stem 113
(FMVSS) 208 as applicable at the time you r
vehicle was manufactured . The safety belts
for the front seats have "pretensioners" that help to take slack out of the be lt system. The
pretensioners are also activated by the e lec­
tron ic contro l unit for the airbag system .
The front safety belts a lso have load lim iters
to help reduce the forces applied to the body
in a crash.
The airbag for the driver is in the steering
whee l hub
c> fig. 120 and the airbag for the
front passenger is in the instr ument panel
c> fig . 121. The general locat ion of the a irbags
is marked "AIRBAG" .
There is a lot you need to know about the a ir­
bags in your vehicle. We urge you to read the
detailed information about airbags, safety
belts and child safety in this and the other
c hapters that make up t he owner's literature.
Please be sure to heed the WARNINGS - they
a re extremely important for your safety and
the safety of yo ur passengers, especially in ­
fants and small children .
& WARNING
=
Neve r rely on airbags alone for protection.
- Even w hen they deploy, airbags provide
only s upp lementa l protect ion .
- Airbag work most effe ctive ly w hen used
with p roperly worn safety belts.
- Therefore, alw ays wea r yo ur safety belts
an d make sure that eve ry bo dy in y our
ve ­
hicle is p roperly restrained .
A WARNING
A person on the fron t passenger seat, es­
pec ia lly infants and sma ll children, will re­
ceive serio us injuries and can even be kil­
led by being too close to the airbag when
it inflates.
- Altho ugh the Advanced Airbag System in
your veh icle is designed to tur n off the
front passenger airbag if an infant or a small child is on the front passenger
seat, nobody can absolutely gua ran tee
-
-
that deployment under these specia l 11-

but less than the weight of a small adult, the
front airbag on the passenger side may deploy (the
PASSENG ER AIR BAG OF F light does not
come on).
For example, the a irb ag may depl oy if:
- a small child that is heavier than a typical 1
year-o ld child is on the front passenger seat
(regardless of whether the child is in one of
the chi ld safety seats listed
¢ page 132),
-a ch ild who has outgrown child rest raints is
on the front passenger seat.
I f the front passenger airbag is turned off, the
PA SSENGER AIR B AG OFF light in the center
of the inst rument panel w il l come on and stay
on.
The front a irbag on the passenger side may
not deploy (the PASSENGER AIR BAG OFF
light does not illuminate and stay lit) if:
- a small adult or teenager is on the front pas­
senger seat
- a passenger who is not sitt ing upr ight w ith
their back against a non-reclined backrest
with their feet on the veh icle floo r in front
of the seat is on the front passenge r seat.
If the front passenger airbag deploys, the
Federal Standard requires the airbag to meet
the " low risk " deployment criteria to help re­
duce the risk of inju ry through interaction
with the airbag . "Low risk" deployment occurs
in those crashes that take place at lower de­
celerations as defined in the electronic control unit
¢ page 120.
Please be sure to read the important informa­
tion in the sections that follow and be sure to
heed a ll of the WARNINGS.
_& WARNING
To reduce the risk of injury when an airbag
inflates, a lways wear safety belts properly.
- If you are unrestrained, leaning forward,
sitting sideways or out of position in any
way, your risk of injury is much higher.
- You w ill also receive serio us injuries and
cou ld even be killed if you are up against
the a irbag or too close to it when it in-
A irbag system 11 5
flates - even with an Advanced Airbag
¢page 109.
_& WARNING
A child in a rearward-fac ing ch ild safety
seat installed on the front passenger seat
will be ser ious ly injured and can be killed if
the front airbag inflates - even with an Ad­
vanced A irbag System .
-Although the Advanced Airbag System in your veh icle is designed to turn
off the
front airbag when a rearward-facing child restraint has been instal led on the
front passenger seat, nobody can abso­ lutely guarantee that dep loyment is im­
possible in all conceivable situations that
may happen during the usefu l life of your
vehicle.
- The inflating airbag will hit the child
safety seat or infant carrier with great
force and will smash the child safety seat
and child against the backrest, door, or roof.
- Never install a rearward facing child
safety seat on the front passenger seat
unless the
PA SSENGER AIR BAG OFF
light comes on and stays on . If the PAS­
SENGER AIR BAG OFF
light does not
come on and stay on the inflating a irbag
will hit the child safety seat or infant car­ rier with great force and wi ll smash the
child safety seat and child against the
backrest, door or roof. Have the a irbag
system inspected immediately by your
author ized Audi dealer.
_& WARNING
If, in except iona l circumstances, you must
install a forward-facing child restraint on
the front passenger's seat:
- Always make sure the forward-facing
seat has been designed and certified by
its manufacturer fo r use on a front seat
with a passenger front and s ide a irbag.
- Never put the forward-facing child re­
straint up against or very near the instru- ment panel.
~
•
•