dashboard AUDI S3 2009 Owners Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2009, Model line: S3, Model: AUDI S3 2009Pages: 324, PDF Size: 76.02 MB
Page 67 of 324

• Before  you  take your  vehicle  to  an automatic  car wash , make  sure 
you  have the  windshield  wiper  system  switched  off  !lever  in  position 
Ol, otherwise  the  windshield  wiper  system  could  get  damaged  in the 
car  wash  if  it  should suddenly  come  on. 
[ i] Tips 
•  The  rain  sensor  is  part  of  the  interval  wiping  system.  Turning off 
the  ignition  will  also  deactivate  the  rain  sensor . To reactivate  the 
sensor,  switch  off  the  interval  wiping  function,  then  switch  it  back 
on  again. 
•  Worn  or  dirty  windshield  wiper  blades  cause  smearing,  which 
can  affect  the  operation  of  the  light/rain  sensor*.  Check  the  condi
tion  of  your  windshield wiper  blades  regularly . 
•  Applies  to  vehicles  with  light/rain  sensor : When  the  wipers  are 
switched  on  manually  and  in  rain  conditions,  the  automatic  head 
lights*  turn  on~ 
page 53, "Sensor  activated  head- and  tail  light 
control"  or  off  during  the  day  when  the  wipers  are  no  longer  oper 
ating . The  automatic  headlights*  function  is available  in this  case 
only  when  the  light switch  is  in  the  "AUTO"  position~ 
page 53, 
fig. 48. 
• Make  sure  the  washer  fluid  reservoir  in  the  engine  compartment 
is  topped  off  before  going  on  a long  trip.  Look up~ 
page  241 for 
checking  and  filling  the  washer  container . 
•  The wipers  only  operate  with  the  hood  complete ly c losed .• 
Con tro ls and  eq uip
ment 
Clear  vision 
Rear  window  wiper 
(Q 
The wiper  lever  is also used  to  operate  the  rear  window 
wiper  and  the  automatic  wiper/washer function. 
Fig. 65  Wiper  leve r: 
activating  the  rear 
wi ndo w  wipe r and 
washer 
The  rear  window wiper and the  automatic  wiper/washer 
functions  are  activated  as follows: 
Intermittent  wiping 
Push the  wiper  lever  forward  towards  the dashboard  and 
to  the 
first position ©=> fig.  65. The  rear  window  wiper 
will  wipe  the  window  approx.  every  four  seconds. 
Automatic  wiper/washer  function 
Push the wiper  lever  forward to the second  stop, position 
0, and  hold  it there  for as  long  as you  want  the rear 
wiper/washer  to  operate. 
Re lease  the  lever  again. The  wiper  will  keep  running for 
approx . four  seconds. 
Switching  intermittent  wiper  action off 
-Pull the  lever  all  the  way  back  to  the  original  position. 
Vehicle  care I I irechnical data