engine AUDI TT COUPE 2014 Owners Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2014, Model line: TT COUPE, Model: AUDI TT COUPE 2014Pages: 284, PDF Size: 34.42 MB
Page 141 of 284

Downloaded from www.Manualslib.com manuals search engine 0 
N 
co 
.... 
\D  Lfl 
N 
Lfl 
....  Inserting 
SIM card 
• Press  the !TELi  button.
• Insert  your mini  SIM card  (printed  side facing
up,  contact  surface facing down)  into the slot
of  the  card  reader ¢ Fig.  138.  The missing  cor
ner  of the  SIM  card  should  be at the  front  left.
Then  push the SIM  card  into the slot  until  you
feel  it engage.
• Enter  the PIN  code  for your  SIM card  in the
MMI.
• Select  and confirm  OK.
• To  allow  the MMI  to connect  automatically  in
the  future,  select  and confirm  Yes.
• To  establish  an Internet  connection  for Audi
connect  services,  confirm the prompt  on the
display  with Accept.
After  connecting  successfully 
After  connecting  successfully,  one or two  signal 
strength  bars (depending  on the  connection  type) 
will  be displayed  in the  status  line of the  infotain
ment  display. 
You  can now  use Audi  connect. •Sele
ct: !M
ENU! button
> Audi  connect.
• Confirm  the system  query of whether  an Inter
net  connection  should be established  with Al
ways  accept.
Removing  SIM card 
• Briefly  press the SIM  card.  The card  will then
eject  from  the slot.  Remove  the SIM  card.
Using  a personal  Wi-Fi hotspot 
Applies  to vehicles:  with Audi  connect 
Requirements 
Your  mobile  device and mobile  network  provider 
must  support  the mobile  Wi-Fi hotspot  function. 
The  personal  Wi-Fi hotspot  on your  mobile  device 
is  activated. 
Other  devices  must be permitted  to access  the 
mobile  hotspot. 
The  Wi-Fi  mode  hotspot  and client  must have 
been  selected  in the  MMI  ¢page  143. Audi 
connect 
Connecting  the MMI  to a personal  hotspot 
• Select:  !TELi button 
> right  control  button >
Connection  manager.
• Select:  right control  button > Wi-Fi  settings >
Wi-Fi  mode.
• Select  and confirm  hotspot  and client.
• Then  select  and confirm  Network  search. The
devices  found will be shown  on the  infotain
ment  display.
• Select  and confirm  your personal  Wi-Fi hotspot
from  the list.
• You  may  need  to enter  the password  specified
by  your  mobile  device.
• Select  and confirm  OK.
- Please  contact  your mobile  network  service
provider  to find  out which  functions  your
mobile  device supports.
- Whether  other devices  can use  the mobile
Wi-Fi hotspot  depends on your  data  plan.
- Audi  recommends  that you set a password
to  protect  mobile wireless  networks  from
unauthorised  access.
Configuring  using 
myAudi 
Activating/configuring  certain Audi 
connect  services 
Applies  to vehicles:  with Audi  connect 
Before  you first  use certain  Audi connect  services, 
it  is  necessary  to activate/configure  them via your 
personal  myAudi account: 
- If  you  do not  yet have  a personal  my Audi  ac
count,  please  register  on the  Internet  at
www.audi.com/myaudi.
- Add  your  vehicle  to your  myAudi  account.
- Activate/configure  the Audi  connect  services
you  require  for your vehicle  in your  myAudi  ac
count.
- When  you call up certain  Audi connect services
on  the  MMI,  it may  be necessary  to also enter
your  myAudi  user data/PIN  in order  to connect
the  vehicle  to myAudi.
..,. 
139   
Page 142 of 284

Downloaded from www.Manualslib.com manuals search engine Audi 
connect 
Detailed  information  on configuration  can be 
found  on the  Internet  at www.audi.com/myaudi. 
Logging  into myAudi  in the  vehicle 
Applies  to vehicles:  with Audi  connect 
Before  you use some  Audi connect  services  (e.g. 
Facebook),  you will need  to connect  your vehicle 
to  your  myAudi  account. ""
Sele ct: !ME
NU! button
> Audi  connect > right 
control  button > Login. 
""  Enter  your myAudi  user data.  Or: Enter  your 
eight-character  myAudi PIN. 
""  Confirm  the entry  with OK. 
You  can then  use all the  Audi  connect  services. 
(©)  Note
You  will receive  your myAudi  PIN after  setting 
up  a myAudi  account.  For more  information, 
please  see www.audi.com/myaudi. 
An  overview  of Audi 
connect  services 
Basic  functions 
Applies  to vehicles:  with Audi  connect 
Fig.  139  Audi connect  overview  with weather  preview 
Specific  functions  for individual  Audi connect 
services  may be available in  the service's  selec
tion  menu. This  can be accessed  via the  Audi  con
nect  menu.  Basic  functions can be accessed  in the 
relevant  options menu. 
"" Select:  I MENU 
I button  > Audi  connect > desired
Audi  connect  service> right  control  button. 
Depe nding  on the  Audi  connect  service you wish 
to  use,  the following  basic functions  may be 
available: 
140  Save 
as a preview 
You can  have a preview  of selected  Audi connect 
services  displayed  in the  overview @¢ Fig.  139. 
Show  on map 
You  can have  selected  content  displayed  on the 
map  and use it for  route  guidance. 
Read 
You  can have  the MMI  read out some  types of 
content. 
Navigate  to 
If  an  entry  contains  a Location  (e.g. in City 
events),  this can be used  as a navigation  destina
tion  in the  MMI. 
Refresh 
The  content  of the  Audi  connect  service selected 
is  updated. 
Change  search area 
The  search  area selected  can be changed  at any 
time.  For more  information  on search  areas, 
please  refer to ¢page  150. 
Closing  an Audi  connect  service 
You  can close  an Audi  connect  service at any  time 
and  go back  to the  Audi  connect  overview,  re
gardless  of which  function  you have  chosen 
¢Fig.  139. 
Travel  information 
Applies  to vehicles:  with Audi  connect 
Information  on landmarks  and tourism  tips in 
the  search  area selected. 
"" Select  an confirm  a landmark  to have  details 
displayed. 
Parking information 
Applies  to vehicles:  with Audi  connect 
Information  on places  to park  and parking  fees in 
the  search  area selected. 
""Select  and confirm  Parking information. 
...   
Page 143 of 284

Downloaded from www.Manualslib.com manuals search engine 0 
N 
co 
.... 
\D  U'l 
N 
U'l 
....  You can 
use the  right  control  button to sort  the 
car  parks  by distance  or by  availability. 
Fuel  prices 
Applies  to vehicles:  with Audi  connect 
Information  on filling  stations  with the cheapest 
prices for  your vehicle  in the  search  area selected. 
.,..  Select  and confirm  Fuel prices. 
You  can use the  right  control  button to sort  the 
fuel  prices  by price  or by  distance. 
Weather 
Applies  to vehicles:  with Audi  connect 
Information  on the  current  weather  and weather 
forecasts  for the  search  area selected  (e.g. In im
mediate  vicinity). 
.,..  Select  and confirm  Weather. 
Flight  information 
Applies  to vehicles:  with Audi  connect 
Information  on flights  and current  arrival/depar
ture  times  in the  search  area selected. 
.,..  Select  and confirm  Flight information. 
You  can use the  right  control  button to select  the 
information  you require. 
Train  information 
Applies  to vehicles:  with Audi  connect 
Information  on stations,  stops and current  arriv
al/departure  times in the  search  area selected. 
.,..  Select  and confirm  Train information. 
You  can use the right  control button to select  the 
train  information  you require. 
City  events 
Applies  to vehicles:  with Audi  connect 
Information  on events  of different  categories  in 
the  search  area selected. 
.,..  Select  and confirm  City events > left  control 
button  > a  category.  Audi 
connect 
Online  news 
Applies  to vehicles:  with Audi  connect 
With  this service,  you can call  up the  latest  head
lines  from  your preferred  news providers  in the 
MMI. 
Important:  You must  have subscribed  to news 
feeds  via your  myAudi  account  and your  vehicle 
must  be connected  to myAudi  c::> page  140 . 
.,..  Select 
Online  news> a headline. 
If  you  have  not yet subscribed  to any  personal 
news  feeds  in your  myAudi  account, pre-con
figured  news feeds  will be shown. 
Facebook 
Applies  to vehicles:  with Audi  connect 
You  can  access  the most  important  functions of 
your  Facebook account  via the MMI. 
Important: You  must have a Facebook account 
and  your  vehicle  must be connected  to myAudi 
c::>page  140. 
.,..  Select  Facebook  > left  control button  > func-
tion  desired  (e.g. News  Feed) . 
You  can choose  the following  categories  in the 
Facebook  menu: 
- News  Feed: New posts  (e.g. from  friends  or
groups)  are displayed.
- Timeline:  Your Facebook  timeline is displayed.
- Messages:  Messages you have  received  are dis-
played.
- Places  nearby:  Places located  near you (e.g .
that  have  been  recommended  by your  friends)
are  displayed.  You can enter  categories  to re
strict  the search  further.
- Events:  Events to which  you have  been  invited
are  displayed.
- Friends:  All your  Facebook  friends are dis-
played.
Depending  on the  Facebook  category chosen, dif
ferent  Functions  will be available  to you: 
- What's  on your  mind?:  You can update  your
Face  book  status  with the help  of ready-made
IJJJ. 
141   
Page 144 of 284

Downloaded from www.Manualslib.com manuals search engine Audi 
connect 
templates  or text  blocks  personalised  using 
myAudi. 
- Where  are you?:  You can enter  your current  lo
cation  and make  it visible  to others.
{[))  Note
- Further  settings  (such as Account  Settings
and  Privacy  Settings)  cannot be changed  in
the  MMI.  If you  wish  to change  anything  in
these  menus,  please do so on  the  Facebook
website  itself.
- You  can only  connect  one Facebook  account
to  your  myAudi  account.
- You  can use  the Internet  to add  personal
templates  at www.audi.com/myaudi.
- Audi  connect  enables you to access  the
Facebook  service. Audi cannot  guarantee
that  these  services  will be available  indefi
nitely;  this is the  responsibility  of Facebook.
Twitter 
Applies  to vehicles:  with Audi  connect 
You  can access  the most  important  functions of 
your  Twitter  account  via the MMI. 
Important:  You must  have a Twitter  account  and 
have  connected  your myAudi  account  to Twitter. 
..  Select  Twitter > left  control  button > function 
desired  (e.g. Trends). 
You  can choose  the following  categories  in the 
Twitter  menu: 
- Tweets:  All the  tweets  you have  created  are lis
ted.
- Home:  All the  tweets  from people you  are fol
lowing  are displayed.
- Trends:  Topics currently  being favoured  for dis-
cussion  within a particular  country.
Depending  on the  Twitter  category  chosen, dif
ferent  Functions  will be available  to you: 
- New  tweet:  You can send  a new  tweet  with the
help  of ready-made  templates or text  blocks
personalised  using myAudi.
- Refresh:The  Twitter function  selected is upda
ted.
142  -
Favourite:  You can "favourite"  a tweet  to show
that  you like it.
- Retweet:  You can repost  a tweet  to share  it
with  other  people.
@  Note
- Further  settings  (such as your  account,  lan
guage,  Tweet privacy,  and location  settings)
cannot  be changed  in the  MMI.  If you  wish
to  change  anything  in these  menus,  please
do  so on  the  Twitter  website  itself.
- You  can use  the Internet  to add  personal
templates  at www.audi.com/myaudi.
- You  can only  connect  one Twitter  account  to
your  myAudi  account.
- Audi  connect  enables you to access  the Twit
ter  service.  Audi  cannot  guarantee  that
these  services  will be available  indefinitely;
this  is the  responsibility  of Twitter.
Audi  connect  services  in the  navigation 
system 
Applies  to vehicles:  with navigation  system and Audi  connect 
The following  Audi connect  services are currently 
available: 
- Navigation  with Google  Earth and Google
Street  View ¢page  159 .
- Point  of interest  search (e.g. restaurants):  For
planning  a route  via the  MMI  control console
¢  page  150 and the speech  dialogue  system
¢page  116.
- Adding  a destination  to your  MMI  via your
myAudi  account  or Google  Maps ¢page  159.
- Online  traffic information:  Up-to-the-minute
reception  of information  on accidents,  road
works  and other  incidents  ¢page 161.
- myAudi  special destinations:  Your personal
special  destinations  can be imported  to your
MMI  via an SD  card.
- Navigation  map update  service:  Navigation
map  updates  can be imported  to your  MMI  us
ing  an SD  card.
- The  Audi  connect  service navigation  map
update  service using an SD  card  allows  you
to  find  out which  software  version is  
Page 145 of 284

Downloaded from www.Manualslib.com manuals search engine 0 
N 
co 
.... 
\D  L/'l 
N 
L/'l 
....  installed 
in your  vehicle.  You can then  check 
whether  a new  version  is available  at 
www.audi.com/myaudi.  You can also  have 
the  new  navigation  data installed  by an  Audi 
dealer  (carries additional charges). 
- For  more  information  on the  myAudi  spe
cial  destinations  and the navigation map
update  service,  please see the  Operating
Manual  for Audi  connect  at www.audi.com/
myaudi.
Audi  connect  services for the  telephone 
Applies  to vehicles:  with Audi  connect 
The  following  Audi connect  services are currently 
available: 
- Creating  contacts  on your  PC via  your  myAudi
account  and loading  the contacts  into the direc
tory  of your  MMI  system  ¢page 133.
Audi  connect  services  in the  media  menu 
Applies  to vehicles:  with Wi-Fi  audio  player  and Audi  connect 
- Wi-Fi  audio  player:  To access  the media  centre
of  your  player  (e.g. smartphone)  connected via
Wi-Fi  ¢page  172. Additionally,  you can use
the  Audi  MMI  connect  app to access  Internet
radio  programmes*.
- Online  media:  With assistance  from the Audi
MMI  connect  app, this function  allows you to
access  and operate  various online media serv
ices  using  the MMI.
@  Note
Please  contact  an Audi dealer for more  infor
mation  on Wi-Fi  audio  players  and for a list  of 
supported  devices. 
Further  options 
Applies  to vehicles:  with Audi  connect 
.,.  Select:  I MENU  I button  > Audi  connect > right 
control  button. 
The  following  options are available  to you  in the 
overview  of the  Audi  connect  services: 
- Login: ¢ page  140
- Connection  manager: ¢page 187 Audi 
connect 
- Licence  periods:  The validity  and the time  re
maining  on your  licences  is displayed.  If the  Li
cence  expiry  warning  function is switched  on, a
message  will be displayed  before the licence  ex
pires.
Wi-Fi  hotspot 
Applies  to vehicles:  with Wi-Fi  hotspot 
You  can  use your  MMI  system  as a Wi-Fi  hotspot 
for  connecting  to the  Internet  on up to eight  Wi
Fi  devices.  Small, light Wi-Fi  devices  that are not 
permanently  attached to the  vehicle  must only 
be  operated  from the rear  seats  while the vehicle 
is  moving. 
Impor tant: The ignition  must be switched  on. 
.,.  Select:  !TEL! 
button  > right  control  button Con-
nection  manager. 
.,.  Select: 
right control  button > Wi-Fi  settings. 
You  can access  the following  settings in the  Wi-Fi 
settings  menu: 
Wi-Fi  mode 
The  Wi-Fi  hotspot  is deactivated  when the vehicle 
leaves  the factory.  Set the  Wi-Fi  hotspot  to hot
spot  before  establishing  a connection  between 
your  vehicle  and your  Wi-Fi  device. 
- hotspot:  The MMI's  Wi-Fi hotspot  is active  and
visible  to other  devices.  It is possible  to connect
to  new  Wi-Fi  devices.
- hotspot  and client:  The MMI's  Wi-Fi hotspot  is
active.  An Internet  connection  to a personal
Wi-Fi  hotspot  (e.g. smartphone)  can be estab
lished.  You can search  for your  personal  hot
spot  and connect  to the  MMI  using  Network
search  ¢page  144 ¢page  139.
- off:  The MMI  system's  Wi-Fi hotspot  is deacti
vated.  It will  not be possible  to establish  an In
ternet  connection  .
Hotspot  settings 
The  Wi-Fi  connection  between your vehicle  and 
the  Wi-Fi  device  (laptop  or mobile  phone)  is en
crypted.  Before a connection  can be established, 
you  must  enter  the following  values/settings 
when  setting  up your  Wi-Fi  device  (these values 
can  be edited  as required): 
..,. 
143   
Page 146 of 284

Downloaded from www.Manualslib.com manuals search engine Audi 
connect 
-Access  point (SSID):  Name of the  Wi-Fi  net
work.
- Password:  A random  MMI password  is set  at
the  factory.  This password  can be changed.  The
encr yption  type WPA2  requires  the password  to
be  at Least  8 characters  long. Please  select a se
cure  password.
- Discoverability:  To switch the discoverability  of
your  Wi-Fi  network  on or off.
Network  search 
A  list  of the  Wi-Fi  networks  available near you is 
d isplayed  . 
.&_  WARNING
- Do  not  allow  the features  of the  Wi-Fi  hot
spot  to distract  you from  watching  the traf
fic  -this  can cause  an accident.
- Laptop  computers  and similar  devices  can
only  be operated  safely when  the vehicle  is
stationar y because  of their  weight;  any
loose  objects  can be catapulted  through  the
vehicle  in an  accident  and cause  serious  inju
ries.  Always  make sure that such  devices  are
securely  stowed while you are driving.
- No  Wi-Fi  devices  may be used  from  the front
seats  in the  areas  around  the airbags  while
the  vehicle  is being  driven.  Please also ob
serve  the safety  warnings  in the  "Airbag  sys
tem"  chapter  under "Important  safety notes
on  the  front  airbag  system"  � page  210,
Front  airbags.
CD  CAUTION
Please  note that it is  your  responsibility  to 
take  precautions  regarding data protection, 
anti-virus  protection  and protection  against 
Loss  of data  on mobile  devices  used to con
nect  to the  Internet  via the  Wi-Fi  hotspot. 
Note 
- You  might  require  a separate  mobile phone
contract  with extra  costs  before  you can use
the  Wi-Fi  hotspot.  For more  information,
contact  your service provider.
- Depending  on your  mobile  phone tariff, you
may  be charged  for receiving  data packets
on  line  via the  Wi-Fi  hotspot, especially  if
144  you 
are  using  the system  abroad:  We 
strongly  recommend  that you  use  a data  flat 
rate.  For more  information,  contact your 
service  provider. 
- For  more  information  on Audi  connect  serv
ices,  visit www.audi.com/connect.
Configuring  the data 
connection 
Applies  to vehicles:  with Audi  connect 
You  must  configure  a data  connection  before you 
can  use Audi  connect  services. 
Fig.  140  Configuring  data connection .,. 
Selec t: !TEL! button > right  control  button Con
nection  manager  . 
.,.  Select: 
right  control  button > Online  settings  > 
Data  connection  settings. 
You  can select  when you would  like the system  to 
establish  an Internet  connection  in the  Data  con
nection  settings  menu. The online  connection  is 
ended  automatically  when a requested  Audi con
nect  service  no Longer  requires  any further  data. 
The  following  options are available: 
Connection  setup 
- if  requested:  A data  connection  will only  be es
tablished  on request.
- no  request:  A data  connection  will be establish
ed  automatically  for the  use  of Audi  connect
services.
- never:  A data  connection  will not be establish
ed.  It is then  not possible  to call  up Audi  con
nect  services.
When  a data  connection  has been  established,  a 
symbol  indicating  the active  data connection @ 
..,.   
Page 147 of 284

Downloaded from www.Manualslib.com manuals search engine 0 
N 
co 
.... 
\D  L/'l 
N 
L/'l 
....  ¢ 
Fig.  140  appears  in the  status  line of the  info
tainment  display. 
You  can cancel  an active data  connection  manual
ly  by  setting  the Connection  setup option  to nev
er. 
Data  roaming 
The  Data  roaming  function is deactivated  when 
the  vehicle  leaves the factory.  Data roaming 
must  be activated  (�) before  you can use  a data 
connection  abroad. This setting  is saved  for the 
current  SIM card/the  mobile phone currently 
connected. 
Audi  connect  (MMI) 
With  the Audi  connect  {MMI) function,  you can 
allow  or deny  the use  of Audi  connect  services  if 
the  connection  is set  to no  request  or if reques
ted. 
Wi-Fi  devices 
You  can use the Wi-Fi  devices  function  to allow 
or  deny  a connection  to the  Internet. 
Connection  settings 
Depending  on the  SIM  card  used,  the connection 
may  be configured  automatically.  However, these 
settings  can be changed.  For more  information, 
contact  your service  provider. 
- APN:  The system  access point depends  on your
mobile  network  service provider  and is assigned
automatically.
- User  name:  The user  name  for your  online  pro
file  is assigned  by your  mobile  network  service
provider.
- Password:  The password  for your  online profile
is  assigned  by your  mobile  network  service pro
vider.
To  store  changed  connection  settings: Press the 
I  BACK! 
button. 
Reset  configuration 
An  online  profile  is created  and configured  auto
matically.  The Connection  settings you have 
changed  manually  are reset  to the  default  set
tings  .  Audi 
connect 
(D)  Note
- According  to the  factory  settings,  the data
connection  will be interrupted  initially when
you  travel  abroad  to protect  you from  unex
pected  roaming  charges.  If you  want  to use
Audi  connect  services  abroad, you must  first
activate  the Data  roaming  option.
- When  using Google  Earth you will  be asked
explicitly  whether you want  to allow  roam
ing  before  the system  dials into a foreign
mobile  phone network.
- For  more  information  on roaming  charges,
contact  your service  provider.
- Fur ther  information 
 can 
be found  on the  In
ternet  at www.audi.com/connect.
Notes  on Audi  connect 
Audi  connect  services 
Applies  to vehicles:  with Audi  connect 
CD) Note
- Audi  connect  services  are only  available  with
an  existing  mobile phone contract  (or one
set  up separately)  and if you  are in an  area
with  mobile  phone network  coverage.  De
pending  on your  mobile  phone tariff, you
may  be charged  for receiving  data packets
on  line,  especially  if you  are using  the sys
tem  abroad.  Because  of the  high  level  of da
ta  usage,  we strongly  recommend  using an
unlimited  data 
plan.
- The  mobile  phone standard 
 LTE* 
is not  avail
able  for use  in all  countries.  For further  in
formation,  please consult  an Audi  dealer  or
your  mobile  network  service provider.
- In  order  to use  Audi  connect  services,  you
will  need  a SIM  card  with  a data  option;  to
use  LTE*,  the SIM  card  will also need  to have
an  LTE  data  option.
- The  availability,  scope, provider  and price  of
the  services  offered  can vary,  as can  the way
in  which  the services  are displayed  on the
screen.  These variations  depend on your
country,  model, model year, device  and mo-
bile  phone  contract.
.,.. 
145   
Page 148 of 284

Downloaded from www.Manualslib.com manuals search engine Audi 
connect 
- Whether  Audi connect  services can be used
depends  on the  availability  of services  provi
ded  by third  parties.
- Please  also observe  the notes  in the  chapter
¢  page  123,  Telephone.
- Further  information  on Audi  connect  is also
available  on the  Internet  at www.audi.com/
connect.  For information  on the  conditions
of  your  mobile  phone contract,  please con
tact  your  mobile  network  service provider.
Data  protection 
Applies  to vehicles:  with Audi  connect 
@  Note
- AUDI  AG collects,  processes, transmits and
uses  the personal  data you provide  in ac
cordance  with legal  requirements  to ensure
that  the individual  Audi connect  services are
provided  and function  properly.  You can use
our  myAudi  platform,  for example,  to acti
vate  further  Audi connect  services and to
transfer  data to and  from  your vehicle.  You
must  register  once in order  to be  able  to
connect  your vehicle  to the  platform.  AUDI
AG  collects,  processes,  transmits and uses
the  personal  data you must  provide  for the
registration  as is necessary  to ensure  that
Troubleshooting 
Applies  to vehicles:  with Audi  connect 
Subject  Advice AUDI 
AG can  provide  the services  and that 
you  can use them.  Your data are not  passed 
on  to third  parties.  Using the myAudi  plat
form  and your  mobile phone,  you can trans
mit  data  to your  vehicle  for the  functions  of 
your  Audi  connect  services und allow  certain 
vehicle  data to be  transmitted  from your ve
hicle. 
- If  you  activate  certain information  services
included  in your  Audi  connect  portfolio  you
can  use  the corresponding  functions directly
in  your  vehicle  after entering  your personal
identification  data (for example  for access
to  social  networks).  In this  case  we pass  on
your  identification  data to the  correspond
ing  service  provider.  You can then  access
your  personal  content via a secure  commu
nication  channel.  This content  is displayed
and  can be used  in the  vehicle.  AUDI AG will
not  store  your personal  content. The neces
sary  connection  data are processed  and
used  in accordance  with legal  requirements
to  ensure  that the services  are provided  and
function  properly.
- Further  information  can also  be found  in
your  MMI  in the  appropriate  options menu
¢  page  110 of the  selected  Audi connect
service.
Audi  connect  services:  Some Audi  Before 
you first  use some  Audi connect  services,  it is  necessary  to 
connect  services  are greyed  out/  activate/configure  them via your  personal 
 myAudi account: 
De-
not  available.  tailed 
information  can be found  on the  Internet  at 
www.audi.com/myaudi. 
Wi-Fi  hotspot:  No Wi-Fi  connec-
Delete all existing  Wi-Fi connections  on your  mobile  device and 
tion  is possible. 
restart it. 
Personal  Wi-Fi hotspot:  Network 
The Wi-Fi  mode  hotspot  and client  must be set  to start  a net-
search  is not  possible  (greyed  out). work 
search  for your  personal  Wi-Fi hotspot ¢ page  139. 
146   
Page 149 of 284

Downloaded from www.Manualslib.com manuals search engine 0 
N 
co 
.-I 
\D  Lfl 
N 
Lfl 
.-I  Navigation 
Navigation 
Calling  up the  navigation  menu 
Applies  to vehicles:  with navigation  system 
The  navigation  system guides you directly  to your  destination,  avoiding traffic obstructions  and using 
alternative  routes if desired. 
Fig.  141  Menu:  Entering  a destination 
..  Select:  I N AV/MAP
! 
button. 
The  Enter  destination  menu is shown on  the in
fotainment  display when you call  up the  naviga
tion  menu  for the  first time.  The following  infor
mation  is also  displayed: 
@  Entry  field for the  search  function 
¢page  148 
@  Home  address  ¢ page  149
@  Destinations  recently  travelled  to 
¢page  148 
©  Stored  favourites  ¢page 149
If  you  have  connected  a mobile  phone to the 
MMI,  your directory  contacts are then  listed. 
Map  preview 
- Select  an entry  from the list.
When  you preselect  an entry  in the  list,  the corre
sponding  destination  is always  displayed  as a 
map  preview @¢ Fig.  141.
Switching  between destination  entry and map 
- Press  the I N
AV/MAP ! 
button  repeatedly  until
the  map  is displayed.  Or: Press  the left  control
button > Switch  to map. A
WARNING 
- Today's  driving conditions  require the full  at
tention  of drivers.  Please  see¢ page  192.
- Pay  attention  to traffic  rules when  driving.
- The  route  calculated  by the  navigation  sys-
tem  is a recommendation  of how  best  to
reach  a destination.  Pay attention  to traffic
lights,  no stopping  signs, lane change  re
strictions,  one-way  streets,  etc.
CD  CAUTION
- Should  the navigation  directions contradict
the  current  traffic regulations,  you must al
ways  follow  the traffic  regulations.
- The  volume  should only be set  at a level
which  enables  you to hear  distant  police and
emergency  vehicles clearly -failure  to do  so
could  result  in an  accident.
@ Note 
- Snow  or other  obstructions  on the  GPS  aer
ial  or interference  caused by trees  or large
buildings  could affect  the reception  of the
satellite  signals and make  positioning  diffi
cult.  GPS reception  and vehicle  positioning
can  also  be adversely  affected by 
--- � 
IJII. 
147   
Page 150 of 284

Downloaded from www.Manualslib.com manuals search engine Navigation 
deactivation  or a malfunction  of several  sat
ellites. 
- Street  and town  names  can change;  there
fore  the names  stored on the  MMI  can in ex
ceptional  cases be different  from the actual
names.
- For  more  information  on the  navigation
map  update  service*,  please see the  Operat
ing  Manual 
for Audi  connect  at
www.audi.com/myaudi.
Entering  a destination 
Search  function 
Applies  to vehicles:  with navigation  system 
You  can use the search  function  to quickly  and 
conveniently  find a destination  and use it for 
route  guidance. 
..  Select:  I NAV/MAP!  button. 
..  Push 
the rotary  pushbutton  upwards. 
- Enter  one or more  search  terms in the  entry
field  (I)¢ page  147, Fig. 141.
- Select  a destination  from the results  list and
confirm  it.
- Select  and confirm  Start route  guidance.
The  route  will be displayed  as an  overview  on the 
map.  Route  guidance  is already  active. 
Narrowing  the search  area 
- Select:  right control  button > Country  selec-
tion.
All  countries  are preselected  for the  search  func
tion  at the  factory.  You can use the Country se
lection  function  to deselect  any countries  you do 
not  require.  This speeds  up the  search  and limits 
the  number  of results  in the  list. 
(Qj)  Note
- The  terms  suggested  by the  MMI  depend  on
the  destinations  to which  you have  recently
driven.
- Up  to 50  entries  are stored  in the  list of des
tinations  to which  you have recently driven.
- For  more  information  on the  search  func
tion,  please  refer to ¢ page  114.
148  Loading 
last destination 
The  Last  destinations  are stored  automatically 
and  can be Loaded  again directly  as a new  desti
nation. 
..  Press  the I N
AV/ M
AP!  button  repeatedly  until 
the  Enter  destination  menu is displayed 
¢  page  147, Fig. 141. 
The  destinations  to which  you have  recently  driv
en  are  displayed  in the  Enter  destination  menu 
and  marked  with the symbol ®¢ page  147, 
Fig.  141. 
- Select  a recent  destination  from the list and
confirm  it.
- Select  and confirm  Start route  guidance.
Delete  last  destinations 
- Select  a recent  destination  from the list and
confirm  it .
- Select  and confirm  the right  control  button >
Delete.
- Select  and confirm  Delete this recent  destina-
tion  or Delete  all recent  destinations.
The  destination  selected or all  the  recent  destina
tions  will be deleted  and no longer  displayed  in 
the  search  function. 
Entering  an address 
Applies  to vehicles: with  navigation system 
..  Press 
the I N
A V/
M
AP!  button 
repeatedly until
the  Enter  destination  menu is displayed 
¢  page  147, Fig. 141. 
..  Select:  left control  button > Enter  address. 
- To  enter  a destination  via the  country:  Select
and  confirm  Country.  Select  a country  from the
list  and  confirm  it. Or:  Search  for a country  via
the  entry  field.
- To  enter  a destination  via the  town/post  code:
Select  and confirm  Town/post  code. Enter a
town  or a post  code.  Or: Select  and confirm  a
town  from the list.
- Select  and confirm  additional  details for the
destination  such as Street,  House number  or
Centre.  Select and confirm  Start  route  guid
ance.