navigation AUDI TT ROADSTER 2018 Owner's Manual

Navigation
,.. Select: right control button > Show alternative
routes.
Three routes will be displayed in the overview
map after you enter a destination
¢ fig. 126.
If available, the following informat ion w ill ap­
pear on the route suggestions:
-Route type (fast (D , fast alternative @, eco ­
nomic route@)
-Distance to the destination and the calculated
arrival time
Map
Operating the map
A pp lies to: ve hicles w ith navigat ion sys tem
Escondido Fwy
Escondido
F ig. 127 Diagram: map with crosshairs tu rned on
F ig. 128 Diag ram: map with crossha irs t urn ed off
" Press the I NAV /MAP I button repeatedly until
the map is d isp layed
c:> fig . 128.
Zooming in/out on the map
142
-Traffic congestion a long the route includ ing
time delays
The route that was calc ulated according to the
route criteria yo u selected is shown on the map.
The special properties of the route (such as ferry
connections) may be
displayed @¢ fig. 126 . Ad­
dit ional information about individua l route crite­
ria can be found in
c:>page 141.
-Turn the control knob to the left or to the right .
As an alternative, you can also zoom in/out on the map using the MMI
touch ¢ page 97. Or: .,._

Cl 00 .-< N r-­N .-< 0 r-­Vl 00
turn the left thumbwhee l on the mu ltifunction
steering wheel*
r=> page 18.
Turning th e cross hair s on /off
-Switching the crosshairs on : press the control
knob in the map view .
-Switching th e crossh airs off : press the I BACKI
button .
When the cros s h air s are s witched on r:!> fig. 12 7:
(D Orientation : th e map is either displayed as a
2D north up m ap or a 2D heading up map.
@ Scale : turn the control knob to the left or
right to decrease or increase the scale .
@ Zoom: when the Automatic zo om function is
switc hed on, an
"A" for "Automatic" is dis ­
p layed in the magnifying g lass.
© Crosshairs: move the crossha irs in the de­
sired direction us ing the MMI touch control
pad and set a po int on t he map as the desti­
n at ion or have info rmation about the fo cal
po int disp layed.
® Map content (points of interest, favorites) : if
there are mult iple POis in the immed iate v i­
cin ity, they will be shown stacked o n the
map .
@ Additional information on t he crosshai rs po ­
sition : if you move the crosshairs to a loca ­
tion on the map, avai lable information for
the current c rosshairs position is displayed.
Press the control knob to open destination
deta ils or to start route guidance . When the
crossha irs are turned off, the road being cur ­
rently d riven on is shown .
0 Disp lay o f an upcoming maneuver. If the re is
no upcoming maneuver, the distance and ca l­
culat ed arrival tim e to the destination/stop ­
over is displayed in this location.
@ Di sp lay of a better route . Seer:!> page 147 .
When the c rosshairs a re s witched o ff r:!> fig. 128 :
® If a turn arrow is displayed, a bar graph turns
on. The fewer bars are shown, th e shorter th e
d istance is unt il the turn .
l) O nly applie s to vehicl es withou t ca mer a-b as ed speed li mit
d is play .
Navigation
@ Speed limit display l): disp lay of the max i­
mum permitted speed on the expressways
and highways.
@ Road currently being driven on . When the ve­
hicle is stat iona ry, "off road" is displayed
here.
@ Vehicle location (@)
@ Display of active traffic information
(ION LINEI* or lTMC !)
@ Altitude disp lay (.d\)
@ Route information: var ious informa tion will
be displayed dur ing active route guidance
(for example, t he upcom ing maneuver in­
clud ing ca lculated distance and street
names). The d isplay a lso p rovides t raff ic in­
format io n or points of inte rest on the cur rent
route.
Map functions
Applies to : vehicles with navigation system
.. Press the !NAV /MAP I button repeatedly unti l
the map is displayed
r=> page 142, fig. 128.
.. Select: left control button > desired function.
Switch to d estin ation input
T he Enter de stin ation menu is d isp layed
r:!> page 134, fig. 1 22 .
Traffic messages
Current traffic information is disp layed in the In­
fota inme nt system display . See
r:!> page 145 .
Route list
The route list can o nly be disp layed when route
guidance is active and contains informat ion re ­
gard ing the route, the names of the streets and
the le ngth of the route sect ions. When traveling
o n highways, poss ible parking lots and rest areas
are show n, wh ich you can se lect as a stopove r.
POis along the route
Requirement: route guidance must be active .
Searching for points of interest a long your cur­
rent route See
r:!> page 13 7 .
143

Navigation Additional options on the map
A pp lies to: ve hicles w ith navigat ion system
.,. P ress t he I N AV/MAPI but ton repeate dly un til
t h e map is d is pla yed
¢page 14 2, fig. 12 8.
.,. Press t he righ t con tro l bu tton .
D epending on the f unct ion selected, the follow­
i n g op tions can also be se lec ted unde r the
Map
menu:
Cancel route guidance : see¢ page 139.
Map settings: see ¢ page 144.
Route criteria : see ¢page 14 1.
Voi ce guidance: see ¢ page 1 41.
Navigation settings : see ¢ page 140.
Online traffic data* : see ¢page 145 .
Show alternative routes: see ¢ page 14 1.
Parking along the route : parking options near
t he vehicle are disp laye d.
Save current position : you can save your current
ve hicle posi tion as a favor ite
¢ page 140 or save
it as a contact in t he
d ire cto ry¢ pag e 140.
Audi connect at this location ": allows yo u to
search fo r
City events or Weather at the entered
locat ion .
Country information: you ca n disp lay the appli ­
cab le urban and rura l speed lim its for any coun­
try/state . T his i nfo rmation w ill be automat ica lly
shown to you in the route i nfo rmat ion @
¢ pag e 142, fig . 128 w hen the speed lim it is ex ­
cee ded, if this funct ion is
acti vate d¢ page 145 .
Avoid route *: when route gu idance is act ive, the
calc ulated ro ute w ill avoid t he a rea yo u have
specif ied (max imum : 12 mi (20 km)), if possibl e.
Th e navigation sys te m cal cula tes a n alt er nat ive
ro ute. The rout e to be av o ide d that you h ave en ­
t ered applie s on ly to the cur rent route an d m ust
be set a gain, if neede d. The a reas yo u have se -
1> Provider at time of printing.
2> AUDI AG provi des access to services from third party pro ­
v iders. Pe rmanent ava ilability cann ot be guaran teed , be ­
cause that depe nds on th e thir d party provider.
144 l
ecte d to avoi d w ill appear wi th re d an d whit e
s h ading on the map .
Map settings
Applies to: vehicles wit h navigat ion syste m
.,. Press the I NAV/MAPI button repeatedly unti l
the map is displayed
¢ page 142, fig. 128.
.,. Select: r ight cont rol b utton> Map settings.
De pend ing o n the selected fu nction, t he follow ­
i ng settings can be selected :
Map colors
Day /Night :
the map i s disp laye d wit h a lig ht/
dar k backgroun d.
Automatic : when the ligh ts swi tch on, th e map
c ol ors swi tch from day to n ight.
Map display
Standard
<=> pag e 142, fig. 127 .
Google Earth *1
)2
) ¢ page 145, fig. 129 .
Traffic ¢page 14 5.
Map orientation
Destination :
th e map indica tes the des tination
and is or iented to t he nor th .
2D heading up map /2D north up map : the cur­
r ent vehicle pos ition is displayed . Th e map is ori­
en ted in the d irecti on of tr ave l o r to t he nor th.
3D map : when this function is switched on, the
cu rrent veh icle pos it io n is shown on a three-di­
mens iona l ma p and orien ted in t he d irec tion of
travel. At a sca le o f 62 mi ( 100 km) and la rge r,
t he m ap orie nta tion is to th e north.
Overview : the entire route from the vehicle pos i­
tion to the des tina tion or th e next s to p ove r is d is­
p layed on the m ap. The map scale depends on
t he le ngth of the ro ute an d ad ap ts au toma tically .
T he map is or iente d t o the north.
1111-

Cl co .... N ,....
N ...... 0 ,....
Vl co
Route information
The display of route information s uch as the cur­
rent road being driven on, upcom ing maneuvers,
traffic information or points of interest along the
route can be switched on/off .
Automatic zoom
On: the map scale is adapted a utomat ica lly de­
pending on the type of road being trave led (ex­
p ressway, highway, other roads) so that you al ­
ways have an optimal overview of the road ahead.
The scale is also automatically adapted when
there are upcoming maneuvers to provide a bet ­
ter detai led view.
Off : the map sca le you have chosen is main­
tained .
Map content
Map content, such as traff ic information favor-'
ites or restaurants, can be displayed or hidden
( ~ ).
Satellite map
App lies to: ve hicles with navigation sys tem and Audi co nnect
You can display the navigation map with satel ­
lite images.
F ig. 129 Examp le: satellite map
Requirement: the requirements for Audi co nnect
must be met
~ page 124.
.,. Press t he I NAV/MAPI button repeated ly un til
the map is displayed .
.. Se lect: right contro l button > Map setting s >
Map di splay > Google Earth 1J2J.
l) Provider at time of printing .
2> AUDI AG prov ides access to services from th ird party pro ·
v iders . Pe rman ent ava ilability cannot be guaran teed , be ­
c ause that depe nds on th e th ird party provider.
Na viga tion
The ma p view is based on data packets rece ived
from the Internet in the form of satellite images,
which are then comb ined with the roadways from
the
Standard map view. There are two gigabytes
of memory space in the MMI memory that can be
used to temporarily store the map or navigat io n
data that was rece ived. This is roughly the
amount requ ired for the map/navigation data for
a 2,485 m ile (4,000 km) ro ute. As long as the
satellite images loaded for route guidance a re
stored, you can use them witho ut hav ing a n ac­
tive data connect ion .
© Tips
- T he sto red satell ite map2> d ata can be de ­
le ted in
Fa ctory setting s> Navigation and
online memory
¢page 174 .
-The s atellite map2l is up dated regularly
whenever the function is opened . The proc­
ess may take several seconds.
- When the sate llite map
2
) display is switch­
ed on wi th the 30 position map type, the
map display automatically switches to the
20 map type when driving through tunnels.
- Always read the
chapter~ page 131.
- For add ition al information, v isit
www .aud iusa .com .
Accessing traffic
information
Auto rerouting (traffic)
Applies to: vehicles wi th navigat ion syste m
When receiving t raffic information through TMC/
online · depending on availability- you can have
the MMI nav igate you around traffic inc idents, if
poss ible.
Reception of traffic i nfo rmation is indicated by
the
ITMC ! or ION LINE I symbo l on the map
~ page 146, fig. 130 .
145

Navigation
Online traffic information
Applies to: ve hicles w ith navigation system and Audi connect
The MMI can receive real-time online traffic information about congestion, accidents, road construc­
tion and other incidents .
Fig . 130 Example : on line t raffic info rmat io n disp lay • wit hout better route
Req uirement : the requirements fo r Audi con nect
m ust be
met ~ page 124.
.,. Press the I NAV/MAPI button repeated ly until
the map is d isplayed .
" Select : rig ht contro l bu tton > Online traffic da­
ta > On ([;1).
"Se lect : left co ntrol button> Traff ic messages.
T he tra ffi c in fo rmat ion overv iew is shown.
D epending on vehicle equipment, the follow ing
i n fo rm ation may be show n in t he t raff ic informa­
tion
o ve rview ~ fig. 130:
(D A message will appear if the MMI calculates a
better route for the cu rrent route guidance .
M ore infor mation ca n be found unde r
~page 14 7.
@ The status line in the Infota inment display
indicates the reception of traffic information
(I T MC I or IONLI NEI).
@ The current selected traffic message is also
shown as a ma p preview i n the I nfota inment
sys tem disp lay.
© Color-coded markings along the route indi-
cate the traffic flow.
Traffic di splay
Green : traffic is flowing freely .
Yellow: stop-and-go traffic.
146
Red : congestion .
Shaded mark ings indicate the length of the area
with congestion.
Colored warning symbol s: there is a traffic i nci­
dent immediately ahead on the route .
Grayed out warning symbols : traffic incidents
that are not on your route .
Red warning symbols: all w arning sym bols w ill
be red w he n r out e g uidance is no t act ive.
The disp lay of colo red markings, warning sym­
bo ls, e tc. can be set in the
Map content menu
<;} page 14 5.
You can switch off the recept ion of on line traff ic
i nforma tion at any
t ime ~ page 146.
Switching the traffic map display on
For an optimum traffic information display:
I NAV/MAPI button> r ight control button > Map
settings > Map display > Traffic.
..,

Cl 00 ... N r-­N ... 0 r-­Vl 00
You can also display the o nline traffic info rma­
tion
in the sate llite map*1
) ¢ page 145 or the
standard map
¢ pag e 142, fig . 127
(D Tips
-Online traff ic information is not available in
Canada .
- Always read the chapter
~ page 131, About
Audi connect .
-Havi ng the Online tr affic data fu nction
switched on provides t he most accu rate re ­
ports of traffic situations as we ll as traffic
forecasting. Yo ur vehicle transmits and
processes its anonymous, encrypted posi ­
tion information at regular intervals to the
traffic data provider . If yo u do not want to
use this, you can switch off the
on line traf­
fic information
function at any time .
-The online traffic informat ion network is
curre ntly not ava ilable i n all countr ies, and
the coverage is not nat io nwide . For add i­
tiona l information, v is it www.aud iusa.com.
Traffic information (TMC)
Applies to: vehicles with navigation system
~ Press the I NAV /MAPI button repeated ly un til
the map is disp layed.
~ Se lect : left control button > Traffic me ssage s.
TMC t raffic mess ages are switched o n at the fac ­
tory.
Multip le traffic messages a re summarized in the
overview unde r th e correspondi ng street names
or h ighway names.
-Di spla ying all traffic messages for a street /
highwa y:
select and confirm the [ill symbol. A
l ist of a ll the traffic messages for the sele cted
st ree t/ hi ghway is displayed.
-Opening the detailed view of a tr affic me s­
s age :
if you se lect an ent ry from the list, the
t raff ic information will be shown as a map p re­
view ®¢
page 146, fig. 130 . Select and con-
l) AU DI AG prov ides acces s to serv ices from third pa rty pro ­
v iders . Pe rman ent availa bili ty c anno t be g uara nteed , be ­
c a use that dep ends on th e th ird party provid er.
Na vigation
firm a traff ic message to d isplay the details for
that message.
-Displ aying th e sele cted traffic me ssage on the
map :
select the right control button > Sh ow on
map .
-Displaying the ne xt traffic mes sage on the
map :
press the control knob .
Traffic information display
Colored warning symbol s:
traffic incidents o n
yo ur r oute are shown in the upper sect io n of the
li st and are sorted ac cording to d istance .
Warning symbol s with~: avo ided traff ic inci­
dents.
Grayed out warning s ymbol s: traffic incidents
that are not on your route . T hey are sorted ac­
cording to road type (expressway, h ighway, other
r oad), cou ntry and name.
Shaded markings indicate the length of the area
with congest ion .
(D Tips
Critical traffic information, such as war nings
abo ut wrong-way drivers, is a utomat ica lly dis ­
played . To hide t he traffic informat ion, press
the
IBACK ! button or the contro l knob .
-TMC traffic reports are not available in Can ­
ada . For more info rmat io n, p lease contact
S irius Canada.
Better route
Applies to: vehicles with navigation system
By receiving traffic information through TMC,
your MMI calculates a better route -if available -
and the possible time saved for the current route
guidance. You can decide yourself which route
you would like to use.
~ Press the ! NAV/MAPI button repeatedly unti l
t he map is displayed.
Requirement: route guidance must be active .
147

Navigation
If you r MMI has calculated a better route than
the current route guidance, the message
A better
route is available.
appears on the map along
with the time that may be saved. A better route
is indicated in the map view by the symbol
rS
c::;,pag e 142, fig. 127 .
Apply better route
- Press the right contro l button in the map view .
Or: select the left contro l button > Traffic mes·
sages.
The better route with the calcu lated ar­
rival time is displayed .
Troubleshooting
App lies to: ve hicles w ith navigation system
Problem Solution
-Select and confirm the better route. Or: select
and confirm
Details to display details about the
optimized route. You can zoom in or out on the
map using the MMI touch control pad. Require­
ment: there must be more than one optimized
route calculated. Press the control knob to
sw itch to the next route in the detailed view .
Closing the detailed view: press the I BACK I
button.
- After you have selected a better route, the
route w ill be recalculated.
Free text search: the desired des- The dest inat ion might not be entered in the navigation database.
ti nat ion cannot be found .
Or: check the spelling of the term that was searched . Check if the
desired country/state was selected for the free text search using
the
Country/state selection ¢page 135 or the option All coun-
tries/states.
148

Radio
Radio functions
Free text search
Using the free text search, you can select the or­
der that the search terms are entered in the in­
put field . Search in all frequency bands for a sta­
tion name or program type, such as
News .
891 ,,
~ H'J.3
D
HY .6 WIBI-FM HDl
flLJ.7 WIBI-FM HD4
""
""
~
il'J.9 WIBI-FM HD6 ""
Fig. 133 Input field a nd results l ist fo r free tex t sea rc h
- Opening the free text search: when in a stat ion
list, keep turning the control knob to th e left
until the
free text search input fie ld is dis­
played .
-Using the free text search : see ¢ page 101,
Free text search.
You can also search for frequencies .
Stat ions from the presets @ are disp layed in the
results list
Q) ¢ fig. 133. The symbo l@ indicates
which station list you sw itched to based on the
stat ion selection .
Additional options
.,. Select : I RADIO ! button> right control button.
The follow ing options are ava ilable depending on
the frequency band:
- Sound settings : see ¢ page 177.
-Store as preset : see¢ page 151, Presets .
-Delete all entries : all entries are deleted in the
Last stations view.
-Tag this song for iTunes *1
) : connect yo ur Apple
device to the A udi music interface* on yo ur
MM I. Se lect and confirm
Tag this song for
iTunes.
The track that is currently p laying is
stored on your App le device. Synchronize your
1> I n pr ep ara tion at t he time of pr inting.
150
App le device wit h iTunes. The tagged track will
disp lay the next time you open your iTunes me ­
dia center . If there is no App le device connect­
ed, the tagged tracks are stored temporar ily in
the
MMI (max imum of SO tracks). Once you
connect your Apple dev ice to the Audi music in­
terface, the tags are stored on the device .
-Manual tuning: the frequency bars are dis­
played. Select and confirm the des ired frequen­
cy .
- Seek: the radio tunes to the previous or next re­
ceivab le stat ion.
- Scan : all stat ions are p layed for several seconds
each.
- Radio settings: see ¢page 152.
Radio text
.,. Select: I RADIO I button > left control button > a
frequency band (such as
FM ) > a station .
.,. Select: right control button> Radio text .
Browsing through radio text entries :
turn the
control knob to the left or right.
Requirement: a radio text entry must be dis­
played and the station must be broadcasting a
phone number, a navigation destinat ion or a text
message number as Radio Text Plus information.
If a location, a phone number or a text message
number is included with a radio text entry, the
radio text will be shown with a colored border .
You have the following opt ions:
Call*/Start route guidance*/Write text mes­
sage*:
- Select a radio text entry with Radio Text Plus in­
formation and press the control knob.
- Select and confirm
Call* /Start route guid­
ance* /Write text message* . Or :
press the
I BACK ! button to cancel.
(D Tips
The availab ility of radio text and Rad io Text
Plus depends on the rad io stat ion.

System settings
delete the programmed voice training with the
Reset individual speech training function .
Factory settings
The follo wing funct ions can be reset to the facto­
ry default settings :
-Sound settings
- Radio
- Media settings
- Jukebox*
- Directory*
- Telephone *
- Bluetooth and Wi-Fi*
- Navigation settings *
- Navigation and online memory *
- Voice recognition system*
- Message settings *
-Apps*
-Tool tips
-Audi connect *
You can select the desired functions individually
or all at once with the option
Select all entries .
Select and confirm Restore factory settings.
(D Tips
-Make sure that not only t he settings were
deleted but also the stored data, if appl ica­
ble.
- Please note that the
voice recognit ion sys­
tem* is not available in Cabriolets that do
not have a factory- insta lled safety belt mi­
crophone .
174
Connection manager
Introduction
The connection manager gives you an overview
of your connected devices and their network sta ­
tus.
Settings Connection manager
I • Prima hone : M_Phone C,
t MyPhone ~
• Secondary phone : Not connected
• Data connect,on: Not connected
• MMI connect App: Not connected
• w,- F, aud ,o player: Not connected
Fig . 147 Co nnect ion manager
.,.. Select: !MENUI button> Settings > left control
button
> MMI settings > Connection manager.
.,.. Select and confirm a menu it em.
If a mobile device was already connected and you
select and co nfirm the corresponding menu item,
the device name and connect ion status are dis­
played under the menu item.
You can individually
Connect(~) or Disconnect
(0) a pa ired device.
Requirement:
- Th e vehicle m ust be stationary and the ignition
m ust be switched on .
- Th e Bluetooth settings will open on your mo­
bile device during the connection setup .
- Th e Bluetooth function and visibility of the MMI
c::> page 175 and mobile device must be switch­
ed on.
- Th e mobile device to be connected m ust not be
connected to any other B luetooth dev ice .
Primary phone
App lies to: vehicles wi th telepho ne
- Connect new device: search for and connect a
cell phone.
- List of devices already paired: select your cell
phone from the list of all the devices that are
already paired.

System settings
Ringtone volume: you can adjust the volume of
the selected ringtone by turning the contro l
knob.
Message volume: you can adjust the volume of
the notification for an incoming text message by
turning the control knob.
Microphone input level : you can adjust the vol­
ume during a phone call by turning the control
knob.
Navigation
A pp lies to: ve hicles w ith navigation system
Voice guidance: see¢ page 141, Voice guidance.
Voice guidance during phone call: see
¢ page 141, Voice guidance.
Voice guidance volume: you can adjust the voice
gu idance volume during active route guidance by
turn ing the control knob.
Entertainment fader : the volume of audio play ­
back can be temporarily lowered when the park­
ing system or voice guidance is active.
Voice recognition system
App lies to: ve hicles w ith vo ice recogni tion sys te m
Short dialog : prompts in a shorte r format can be
switched on or o ff.
Speech dialog system volume: you can adjust
the volume of the prompts by turning the control
knob.
Parking aid*
You can adjust the signal tone volume by turning
the control knob.
-Adjusting the Front volume: select and con­
firm
High , Medium or Low .
- Adjusting
the Rear volume: select and confirm
High, Medium or Low .
MMI touch volume*
You can adjust the vo lume of the prompts for the
MMI to uch* by turning the contro l knob.
Audi Heartbeat
You can adjust the volume of Aud i Heartbeat by
t ur nin g the control knob.
178
(D Tips
Please note that the voice recognition sys­
tem* is not available in Cabr io lets t hat do not
have a factory-installed safety belt micro­
phone.
Restarting the MMI
(Reset)
Fig. 149 Button co mbin ation to res tart the syste m
.. Briefly press the control knob and both buttons
at the same time to immediately open the
menu
upward ¢ fig. 149.
Software License
information
Information on MMI software and licensing
agreements
- Select: ~
I M _ E_N_ U~ I button> Settings > left control
button >
System maintenance > Version infor­
mation.
- Or : online at www .audiusa .com/software info .
Information on instrument cluster software and
licensing agreements
Press the reset button 10.01 twice within five sec ­
onds after switching the ignition on.