catalytic converter BMW MOTORRAD K 1200 GT 2002 Rider's Manual (in English)
[x] Cancel search | Manufacturer: BMW MOTORRAD, Model Year: 2002, Model line: K 1200 GT, Model: BMW MOTORRAD K 1200 GT 2002Pages: 96, PDF Size: 6.59 MB
Page 32 of 96

30
Safety check
2
Fuel
Refuelling
d Warning:
Fuel is flammable and explo-
sive. Do not smoke. Never
bring a naked flame near the
fuel tank.
The fuel expands when hot
(for instance if the fuel tank is
in the sun). For this reason,
only fill as far as the lower
edge of the filler neck.
e Attention:
Note that fuel containing lead
will destroy the catalytic con-
verter. Do not run the fuel tank
dry or you may damage the en-
gine or catalytic converter.
Place motorcycle on main (centre) stand
– Make sure the ground is level and firm.
Open fuel filler cap
10k41bkg2.book Seite 30 Donnerstag, 24. Juli 2003 9:17 09
Page 59 of 96

3
57
Starting – Riding – Parking
Important notes
Catalytic converter
e Attention:
To avoid damage to the cata-
lytic converter:
Do not run the fuel tank dry
Push-start only when the
engine is cold
Do not run the engine with a
spark-plug cap detached
Do not exceed the engine- speed limits marked on the
revolution counter
Comply with all specified
maintenance intervals
Stop the engine at once if it
misfires
In the event of misfiring or a severe drop in engine power,
consult a specialist work-
shop, preferably an author-
ised BMW motorcycle dealer
If misfiring or malfunction of the
fuel-air mixture preparation sys-
tem causes unburned fuel to
reach the catalytic converter,
there is a risk of it overheating
and being damaged.
Risk of fireHigh temperatures occur at the
exhaust system, particularly if a
catalytic converter is installed.
d Warning:
Make sure that whether riding
or standing still or when the
motorcycle is parked, no eas-
ily flammable material
(for example hay, grass,
leaves, clothing or luggage
etc.) can come into contact
with the hot exhaust system.
Do not allow the engine to
idle unnecessarily or for a
lengthy period when the mo-
torcycle is at a standstill
— risk of overheating or fire.
Ride away immediately after
starting the engine.
10k41bkg2.book Seite 57 Donnerstag, 24. Juli 2003 9:17 09
Page 82 of 96

80
Arrive savely
4
Know-how …In recent years, motorcycles’
technical design features have
become more and more
sophisticated.
Motronic, electronic ignition,
integral brakes, the catalytic
converter or the use of four
valves per cylinder are clear
signs that far more than basic
technical knowledge may be
needed to solve certain prob-
lems. In addition, high-tech
materials are increasingly tak-
ing the place of conventional
ones, which again calls for thor-
ough and expert knowledge if
they are to be handled correctly
during repair work.
To be sure of achieving the nec-
essary standard, it is always
advisable to consult your
authorised BMW motorcycle
dealer.The authorised BMW motorcy-
cle dealer employs staff who
attend regular and comprehen-
sive training courses.
Authorised BMW motorcycle
dealers also receive all the cur-
rent technical information and
are therefore fully aware of the
latest developments.
… technical features …The authorised BMW motorcy-
cle dealer’s staff has the experi-
ence and all the necessary
facts at its disposal when it
comes to solving problems
quickly and effectively. Work-
shops are equipped with the
latest technical facilities, for
example the special tools
developed by BMW, such as
the
BMW diagnosis system and
exhaust emissions tester.
Reliability
10k41bkg2.book Seite 80 Donnerstag, 24. Juli 2003 9:17 09
Page 85 of 96

4
83
Arrive safely
Environmental protection
Development …Motorcyclists have an intensive
relationship with nature. BMW
has made sure that they con-
tinue to enjoy the best possible
prospects for successful riding
in the future.
This not only because your new
BMW is available with exhaust
emission control by closed-
loop, three-way catalytic
converter.
… waste disposal …Behind the scenes, in the repair
shop, we do not neglect the
pro-environmental aspects of
our work either.
Wherever possible, we use
environmentally acceptable
biodegradable materials. We
ensure strict compliance with
all environmental legislation, for
example the correct disposal of
old oil, which is now classified
as hazardous waste in many
countries.
…recyclingAlongside the correct disposal
of environmentally hazardous
materials, recycling is another
high-priority issue for BMW.
For example, plastics that are
marked according to type can
more easily be returned to the
materials cycle. Remember:
when it comes to making
repairs to your motorcycle, the
authorised BMW motorcycle
workshop is far better equipped
to protect the environment than
you are at home.
10k41bkg2.book Seite 83 Donnerstag, 24. Juli 2003 9:17 09
Page 92 of 96

90
Index
i
NNeutral (gearbox), 64
Notes on safetyGeneral, 56
OOctane number, fuel, 31
Odometer, 6
Oil filler neck, 5, 29
Oil levelCheck, 29
Engine oil pressure, 8, 66
Sight glass, 5
Overheating, 57, 65
PPartially integral brakes, 74
Permitted gross weight, 49
Power socket, 4
RRefuelling, 30
Removing system case, 24
RESIDUAL BRAKING FUNCTION, 37, 75
Revolution counter, 6
RHD traffic Headlight setting, 51
Rider’s equipment, 84
Riding, 68
Right flashing turn indicator switch, 13 Rims, 45
Running-in speeds, 62
SSafety check, 26, 27
Safety instructions
Catalytic converter, 57
Safety margin, 73
Seat Adjusting, 20
Installing, 21
Removing, 20
Seat lock, 4
Self-cancelling turn indicators, 12,
13
Self-diagnosis with pull-away test,
76
Sensitive electronic control, 72
Service, 81
Service worldwide, 82
Side stand, 58, 59, 64
Speedometer, 6
Spring preload
Front wheel, 43
Starter button, 13
Starter switch, 13
Starting, 65
Switch on the ignition, 64
System case, 23, 25
N - S
10k41bkg2.book Seite 90 Donnerstag, 24. Juli 2003 9:17 09