Shock absorber adjustment BMW MOTORRAD K 1200 GT 2004 Rider's Manual (in English)

2
Introduction
i
General information and
controls
General view, left side ........... 4
General view, right side ......... 5
Cockpit ................................. 6
Telltale and warning
lights .................................. 7-8
Hazard warning flashers ........ 9
Ignition switch and steering
lock ................................ 10-11
Left handlebar fitting ........... 12
Right handlebar fitting ......... 13
Clock .................................. 14
Display, ambient temperature.. 15
Cruise control ................ 16-19
Adjusting footrest
plate ............................... 20-21
Seat ............................... 22-23
Adjusting windscreen .......... 24
System case .................. 25-27Safety check
Checklist ........................ 28-29
Engine oil ....................... 30-31
Fuel ................................ 32-33
Handlebar levers ............ 34-35
Brake system
- general ........................ 36-37
Brake system - with
BMW Integral ABS ......... 38-41
Coolant level .................. 42-43
Clutch ................................. 44
Spring preload .................... 45
Shock-absorber
adjustment .......................... 46
Wheels ........................... 47-48
Accessories and tyres......... 49
Loads............................. 50-51
Lights ............................. 52-55
Contents
10k41bkg3.book Seite 2 Donnerstag, 27. Mai 2004 5:30 17

46
Safety check
2
1
 Warning:
Before the journey starts, ad-
just the rear shock absorber to
suit the gross weight and load
on the motorcycle.
If spring preload is changed,
it is essential to adjust the
shock-absorber setting
accordingly.
• Place motorcycle on main stand (

62)
• Adjust the rear shock absorber by turning adjuster 1
as follows: Basic setting
(one-up):
• Turn the adjuster all the way clockwise as indicated by the
H arrow
• Then turn the adjuster one full
turn counter-clockwise in the
direction indicated by the S
arrow
Hard setting “H”:
• Turn the adjuster all the way clockwise as indicated by the
H arrow
Soft setting “S”:
• Turn the adjuster all the way counter-clockwise as indi-
cated by the S arrow
Shock-absorber adjustment
10k41bkg3.book Seite 46 Donnerstag, 27. Mai 2004 5:30 17