torque BMW MOTORRAD K 1200 GT 2004 Rider's Manual (in English)

20
General information and controls
1
Adjusting footrest plate
 Warning:
If a footrest is repositioned,
the footrest on the other side
of the motorcycle must be
moved to the same height.
Adjust the gearshift lever to
suit the new footrest position.
 Attention:
For a sporting riding style, both
footrest plates should be in the
upper position.
 Warning:
Make sure that lines and cables
are correctly routed.
Do not damage electric wiring.
Always tighten socket-head
screws 1 and 2 to the specified
torque.
If you do not have a suitable
torque wrench, have the foot-
rest plates and gearshift lever
adjusted by a specialist work-
shop, preferably an authorised
BMW motorcycle dealer.
10k41bkg3.book Seite 20 Donnerstag, 27. Mai 2004 5:30 17

21
General information and controls
1
Adjusting footrest plate• Remove 3 socket-head screws 1
• Move the footrest plate to the
desired position A or B
• Retighten the 3 socket-head
screws 1 t o a tor qu e of 20 Nm
• Adjust the gearshift lever to
suit the new footrest position.
Adjusting gearshift lever• Slacken socket-head screw 2
• Reset the gearshift lever to
the desired position C or D
• Retighten socket-head screw
2 to a torque of 8Nm
Adjusting footrest plate
2
AB
D
C1
10k41bkg3.book Seite 21 Donnerstag, 27. Mai 2004 5:30 17