gearbox BMW MOTORRAD K 1200 R 2004 Rider's Manual (in English)

Status indicators220
Multifunction display 1Fuel gauge
2 Display area for warning
symbols
3 Gear indicator
4 Coolant temperature
display
5 Tripmaster display (
b
37)
6 Clock
Warning and telltale
lights1Telltale light, left turn
indicator
2 Telltale light, high-beam
headlight
3 Warning light, general
4 Telltale light, neutral
5 ABS warning light
OE
6Telltale light, right turn
indicator
Function indicatorsFuel level
The horizontal bars indi-
cate the level in the fuel
tank. When only four bars
show, the fuel level is down to
reserve.
Gear indicator
The gear indicator shows
which gear is selected.
When the gearbox is in neutral
the gear indicator shows 0 and
the neutral telltale light is on.
Coolant temperature
The horizontal bars
indicate the coolant
temperature.

Riding460
If you switch on the igni-
tion while the brakes are
applied, then start the engine
and ride off immediately, the
BMW Integral ABS remains in
its residual braking function
mode (b
77). Self-diagnosis is
performed as soon as the
brake levers are in their fully
released positions for the first
time. Until this completes the
ABS function is not available;
the same applies to power as-
sistance for the brakes.
Wait for ABS self-diagnosis to
complete before you start the
engine. c Starting on gradients:
Switch on the ignition
with gear engaged, clutch
lever released and both brake
levers released. When self-
diagnosis completes, apply
the brakes, disengage the
clutch, and start the engine. c
Side standYou cannot start the motorcy-
cle with the side stand
extended and a gear engaged.
The engine will switch itself off
if you start it with the gearbox
in neutral and then engage a
gear before retracting the side
stand.
GearboxYou can start the engine when
the gearbox is in neutral or if
you pull the clutch with a gear
engaged. Switch on the igni-
tion before you pull the clutch.
When the gearbox is in neutral,
the green neutral telltale light
is on and the gear indicator in
the multifunction display
shows 0.Starting
Do not turn the throttle
twistgrip when starting
the engine. At ambient tem-
peratures below 0 °C, disen-
gage the clutch after switching
on the ignition.c

465Riding
Gear shifts
Attempting to shift gear
with the clutch engaged
can damage the gearbox.
Always disengage the clutch in
order to shift gears. c
The gear indicator in the
multifunction display tells
you which gear is engaged. c

Technical data8132
Power transmissionClutch
Type hydraulic multi-plate oil-bath clutch
Transmission
Type 6-speed gearbox
Overall ratios 1st gear = 2.5242nd gear = 1.842
3rd gear = 1.455
4th gear = 1.287
5th gear = 1.143
6th gear = 1.015
Final drive
Transmission from gearbox to rear wheel drive Universal shaft with integrated torsional damper
Rear-wheel drive Bevel gears
Final drive ratio 2.91:1

i157
Index
Calling up settings, 49
Explanations, 49
Operation, 14FFront-wheel stand, 107
FuelFuel gauge, 20
Grade, 73
Quality, 137
Refuelling, 74
Reserve warning, 24
Fuel tank capacity, 74
Fuses, 138GGear indicator, 20
Gearbox Gear shifts, 64
Position on starting, 57
Technical data, 132
General view
Right side, 11 General view,
left side, 9
Grip heating, 15, 39
HHandlebar fitting Left, 14
Right, 15
Hazard warning flashers, 14, 36, 37
Headlight Adjustment for right-hand/left-
hand traffic, 42
Overview, 17
Headlight flasher, 14, 42
Helmet holder, 45
High-beam headlight
Bulb, 17
Replacing the bulb, 111
Switching on, 14, 42
Telltale light, 20
Horn, 14
IIgnition
Switching off, 34
Switching on, 34, 57
Inflation pressures, 130
Instrument cluster, 16JJump starting, 115KKeys Ignition keys, 34
Replacement keys, 35
Kill switch, 15, 38LLaying up, 124
Locking the handlebars, 35
Low-beam headlight
Bulb, 17
Replacing bulb, 110
Switching on, 41