key BMW MOTORRAD R 1150 R 2002 Rider's Manual (in English)
[x] Cancel search | Manufacturer: BMW MOTORRAD, Model Year: 2002, Model line: R 1150 R, Model: BMW MOTORRAD R 1150 R 2002Pages: 88, PDF Size: 6.49 MB
Page 10 of 88
1
General information and controls
8
Vehicle keysYou will receive two master
keys and one spare key.
The key number is on the
accompanying plastic tag.
OAOptional accessories
OEOptional extra
L Note:
The ignition switch and steering
lock, fuel filler cap and the hel-
met/seat lock are all operated
with the same key. System
cases
OA with locks for the same
key can be ordered on request.
d Warning:
If the motorcycle is fitted with
BMW Integral ABS
OE, only RE-
SIDUAL BRAKING FUNCTION-
ALITY is available when the
ignition is switched off (b 69)
Ignition switch and steering lock
10r28FUNbkg1.book Seite 8 Dienstag, 24. Januar 2006 9:31 09
Page 11 of 88
1
General information and controls
9
Ignition switch and steering lock
Key positions
d Warning:
Never turn the key to OFF or
I while riding the
motorcycle!
ON Operating position,
ignition, ligh ts and all
electrical circuits
switched on
R * Ignition and lights off,
steering lock disengaged
(handlebars can be turned
freely to left or right)
* The key can be removed in these
positions
• Turn the handlebars to full left lock.
e Attention:
Engage the steer ing lock with
the handlebars in this position
only.
OFF* Ignition and lights off,
steering locked
I**Parking light on,
steering locked
L Note:
Switch the parking light on
only for limited periods. Note
state of battery charge.
10r28FUNbkg1.book Seite 9 Dienstag, 24. Januar 2006 9:31 09
Page 15 of 88
1
General information and controls
13A
B
2
1
D
Helmet holder
• Turn key in helmet/seat lock to position B.
• The helmet holder 2 is open
• Close the helmet holder by pressing it lightly into the hel-
met/seat lock until it engages
Removing cover of
stowage compartment:
• Turn the key in the helmet/seat lock to position A
•Cover 1 is released from its
holder •Remove cover
1 in direction
indicated by arrow C
– You now have access to the toolkit and the on-board doc-
umentation. You can also
remove the front seat
• Lift off the front seat in the direction indicated by arrow D
– You now have access to the fuses (
b Maintenance
Instructions, Chapter 2)
Seat/helmet holder
C
10r28FUNbkg1.book Seite 13 Dienstag, 24. Januar 2006 9:31 09
Page 17 of 88
1
General information and controls
15A
Rear seat:• Turn the key in the seat lock to position A
•The rear seat
OE is released
from its holder
• Remove the rear seat
OE in the
direction indicated by the
arrow
• The front seat can now be removed
OE Optional extra
Locking the rear seatOE
e Caution:
When installing, make sure that
storage-compartment cover
OE
is correctly secured.
• Push the rear seat
OE to the
rear into the lock and engage
the seat holder by pressing it
lightly (arrow)
Seats
10r28FUNbkg1.book Seite 15 Dienstag, 24. Januar 2006 9:31 09
Page 18 of 88
1
General information and controls
162
1
A
A
3
d Warning:
After an accident or if the
motorcycle has fallen over,
check that the system cases
are correctly secured.
Max. load per system case:
10 kg ( 2 2 l b s ) .
With System cases installed,
it is advisable not to exceed
130 km/h (80 mph).
Opening the system case• Turn key in case lock to
position A
• Pull up the carrying handle 1
and catch 2
– The two indicators 3 turn red
• Opening the system case
OE Optional extra
System caseOE
10r28FUNbkg1.book Seite 16 Dienstag, 24. Januar 2006 9:31 09
Page 19 of 88
1
General information and controls
17
Closing the system case
e Caution:
Risk of breaking the locking
tongue.
Before closing handle 1 or lock-
ing system 2, turn the key in the
case lock to position A.
OE Optional extra
• Turn key in case lock to
position A
• Push down catch 2 and carry-
ing handle 1
– The two indicators 3 turn
black
• Lock the case and remove the key
Removing system case• Turn key in case lock to posi-tion A
• Pull up carrying handle 1
– The two indicators 3 turn red
• Remove the key and lift the
system case off its holder
System caseOE
2
1
A
A
3
10r28FUNbkg1.book Seite 17 Dienstag, 24. Januar 2006 9:31 09
Page 20 of 88
1
General information and controls
18
2
1
A
34
5
Installing system case
e Caution:
Risk of breaking the locking
tongue.
Before closing handle 1 or lock-
ing system 2 , turn the key in the
case lock to position A.
OE Optional extra
d Warning:
Always make sure that the
cases are secured.
An incorrectly secured case
could be lost and endanger
other road users.
• Insert the system case into the holder (arrows), making
sure that it is firmly seated in
the lower holder 4 and the
upper hook 5
• Turn key in case lock to
position A
• Push down the carrying handle 1
– The two indicators 3 turn
black
• Lock the case and remove the
key
System caseOE
10r28FUNbkg1.book Seite 18 Dienstag, 24. Januar 2006 9:31 09
Page 49 of 88
3
47
3
Starting – Riding – Parking
Your first journey
Safe motorcycling does not
depend on the motorcycle
alone.
Your own skill and common-
sense are needed too.
The key to genuine safety on
the road is a sensible balance
between the motorcycle's tech-
nical features and the rider's
skill, so that together they form
a single efficient unit.
Riding safely in traffic calls for a
sense of responsibility to your
pillion passenger and to other
road users.d Warning:
Do not ride the motorcycle af-
ter drinking alcoholic beve-
rages. Even small amounts of
alcohol or drugs, particularly
if taken in conjunction with
medicines, will adversely af-
fect your perception and your
ability to assess situations
and make decisions, and also
slow down your reflexes.
Take to the road now by all
means, but think carefully about
everything you do.
10r28FUNbkg1.book Seite 47 Dienstag, 24. Januar 2006 9:31 09
Page 53 of 88
3
51
3
Starting – Riding – ParkingRemoving motorcycle
from side stand
d Warning:
When the ignition of a motor-
cycle fitted with BMW Integral ABS* is switched off, only a
“RESIDUAL BRAKING FUNC-
TION” is available (
b 69).
The side stand must be fully
retracted before you ride off.
– Riding with the side stand
extended is a safety risk.
OE Optional extra
• Turn the ignition key to the “ R"
or " ON " position (
b 9)
– Handlebars unlocked
• Both feet on the ground, no weight on the motorcycle
• Hold the left handlebar grip with your left hand
• Keep your right hand on the right handlebar grip and the
handbrake lever
• Slowly raise the motorcycle to the upright position and keep it
balanced
• Sit on the motorcycle and use your left foot to retract the side
stand
Side stand
10r28FUNbkg1.book Seite 51 Dienstag, 24. Januar 2006 9:31 09
Page 55 of 88
3
53
3
Starting – Riding – Parking
Centre standOE
Removing motorcycle
from centre stand
d Warning:
If the motorcycle is fitted with
BMW Integral ABS
OE, only RESI-
DUAL BRAKING FUNCTIONA-
LITY is available when the
ignition is switched off (
b 69).
Make sure the centre stand is
fully retracted before you
ride off.
– Riding with the centre stand
extended is a safety risk • Ignition key in the “
R” or “ ON”
position (
b 9)
– Handelbar lock disengaged
• Hold the left handlebar grip with your left hand
• Hold the frame with your right
hand
• Push the motorcycle forwards off the stand
• Check that the stand has fully retracted
OE Optional extra
10r28FUNbkg1.book Seite 53 Dienstag, 24. Januar 2006 9:31 09