brake BMW MOTORRAD R 1150 R 2004 Rider's Manual (in English)

i
2
Introduction
General information and
controls
General view, left side ........... 4
General view, right side ......... 5
Cockpit ................................. 6
Telltale and warning lights ..... 7
Ignition switch and steering
lock .................................... 8-9
Trip meter/clock .................. 10
Hazard warning flashers ...... 11
Left handlebar fitting ........... 12
Right handlebar fitting ......... 13
Seat/helmet holder .............. 14
Seats ............................. 15-16
System case .................. 17-19Safety check
Checklist ........................ 20-21
Engine oil ....................... 22-23
Fuel ................................ 24-25
Handlebar levers ............ 26-27
Brake system -
general........................... 28-29
Brake system - without
BMW Integral ABS ......... 30-32
Brake system - with
BMW Integral ABS ......... 33-36
Clutch ................................. 37
Lights ............................. 38-40
Shock-absorber
adjustment .......................... 41
Suspension
spring preload ..................... 42
Wheels ........................... 43-44
Accessories and loads ... 45-47
Contents
10r28bkg3.book Seite 2 Dienstag, 25. Mai 2004 5:26 17

3
i
Introduction
Starting – Riding – Parking
Your first journey ........... 48-49
Important notes ............. 50-51
Side stand ..................... 52-53
Centre stand ................. 54-55
Running in ..................... 56-57
Before you start ............. 58-59
Starting ......................... 60-61
Telltale and warning
lights ............................. 62-63
Riding, gear shifts.......... 64-65
Brake system
- general ........................ 66-67
Brake system - with
BMW Integral ABS......... 68-74
BMW Integral ABS
- Fault table ......................... 75Arrive safely
Reliability ........................76-77
Service worldwide ............... 78
Environmental protection .... 79
BMW rider’s equipment ....... 80
BMW motorcycle
equipment ........................... 81
Training means extra
safety .................................. 82
Concluding thoughts ........... 83
Contents
10r28bkg3.book Seite 3 Dienstag, 25. Mai 2004 5:26 17

1
General information and controls
5
9Storage compartment for
toolkit
10 Fuse box
11 Air filter ( b Maintenance
Instructions, Chapter 2)
12 Fuel filler cap (
b 24)
( ) Figure in brackets
bpage number with explanation
*Only R1150R
13 Brake fluid reservoir for front
brake (
b 31, 35)
14 Type plate/vehicle identifi-
cation number
15 Primary spark plug, right
16 Secondary spark plug*, right
17 Brake fluid reservoir for rear
brake (
b 32, 36)
18 Helmet/seat lock (
b 14)
General view, right side
910
17
1312
1814
11
1615
10r28bkg3.book Seite 5 Dienstag, 25. Mai 2004 5:26 17

1
General information and controls
13BA
C
9
10
876
d Warning:
To prevent air from entering
the brake system:
 Do not turn the fitting on the handlebar.
 Do not turn the handlebars
in the clamping blocks.
6 Switch for heated handlebar
grips
OE
A Heating off
B 50% (centre position)
C 100% 7
Starter button
8 Emergency ignition off (kill)
switch (
b 58)
9 Turn-indicator cancel
switch
Press
– Left/right indicators off
10 Right turn indicator switch
Press
– Turn indicators flash
To switch off:
 Press turn indicator cancel
switch 9

Optional extra
Right handlebar fitting
10r28bkg3.book Seite 13 Dienstag, 25. Mai 2004 5:26 17

2
21
2
Safety check
For this reason, check the
details in the following sections
before you start the journey:
– Fuel level
– Positions of the handlebar-lever fittings
– Brake fluid level
– Clutch fluid level
–Brakes
– Warning lights and telltale lights
–Lights
– Shock-absorber setting and spring preload
– Condition of wheels and
tyres, tread depth and tyre
pressures
– Load, gross weight – Check at regular intervals as
described in the following
sections
(each time you stop for refuel-
ling):
– Engine oil level
(every second or third time
you stop for refuelling):
– Brake pads
If you encounter any problems
or difficulties, it is always best to
contact your authorised BMW
Motorrad dealer.
He will provide the necessary
advice and assistance.
Checklist
10r2802g3.fm Seite 21 Donnerstag, 3. Juni 2004 11:29 11

2
27
2
Safety check
4
1
A
Adjusting handbrake lever
d Warning:
To prevent air from entering
the hydraulic circuit of the
brake system:
 Do not turn the fitting on the handlebar.
 Do not turn the handlebars
in the clamping blocks. Turn knob A to set the most
comfortable span:
–Setting 1: minimum distance
–Setting 4: maximum distance
Handlebar levers
10r2802g3.fm Seite 27 Donnerstag, 3. Juni 2004 11:29 11

22
28
Safety check
Brake system - general
Work on the brake system
d Warning:
To ensure reliability have all
work on the brake systems
carried out by a specialist
workshop, preferably an au-
thorised BMW motorcycle
dealer.
Checking the brake
system
d Warning:
Sudden changes in play or
spongy action of the brake le-
ver indicate a fault in the
brake system.
Before riding off, therefore,
always check the resistance
of the front and rear brake le-
vers and test operation of the
brakes.
Do not ride the motorcycle if
you have any doubts about
the safety of the brake sys-
tem.
Immediately seek the advice
of a specialist workshop,
preferably an authorised
BMW motorcycle dealer.
10r2802g3.fm Seite 28 Donnerstag, 3. Juni 2004 11:29 11

2
29
2
Safety check
Brake system - general
Checking brake pads
d Warning:
Have the brake pads replaced
before they wear to the mini-
mum permissible thickness:
have the work performed
by a specialist workshop,
preferably an authorised
BMW motorcycle dealer. Brake pad wear depends on
your personal style of riding.
To ensure reliable operation of
the brakes: do not allow lining
thickness to fall below minimum
value (Maintenance Instructions b Chapter 2).
10r2802g3.fm Seite 29 Donnerstag, 3. Juni 2004 11:29 11

22
30
Safety check
Brake system - without BMW Integral ABS
Checking brake fluid levelGradual wear of the brake pads
causes the brake fluid level in
the reservoir to drop.
d Warning:
If brake fluid level in the fluid
reservoirs for the front or rear
brakes has dropped below
the MIN mark (
b 31, 32), have
the brake system checked
without delay by a specialist
workshop, preferably an au-
thorised BMW motorcycle
dealer.
Changing brake fluid
d Warning:
Brake fluid is subject to
severe thermal loads and
absorbs moisture from the
atmosphere.
Consequently, the brake fluid
must be changed regularly
(see the Maintenance Instruc-
tions
b Chapter 1) by a spe-
cialist workshop, preferably
an authorised BMW
motorcycle dealer.
10r2802g3.fm Seite 30 Donnerstag, 3. Juni 2004 11:29 11

2
31
2
Safety check
Checking front brake fluid
level
d Warning:
Never permit the brake fluid
level to drop below the mini-
mum level (MIN mark)
 Place motorcycle on centre
stand
– Make sure the ground is level and firm  Turn the handlebars fully to
the left
 Check brake fluid level in sight glass
MIN Minimum level
(top of marking ring)
L Note:
Gradual wear of the brake pads
causes the brake fluid level in
the reservoir to drop.
MIN
Brake system - without BMW Integral ABS
10r2802g3.fm Seite 31 Donnerstag, 3. Juni 2004 11:29 11