display BMW X3 2023 Owner's Guide

Activating/deactivating the BMW
Drive Recorder
The BMW Drive Recorder must be activated
before the first use of the recording function.1."Apps"2."Drive Recorder"3.Accept Privacy Policy.4."Settings"5."Recording allowed"6.Select the desired setting.
Recording functions
Automatic recording Recordings are saved automatically when thevehicle sensors detect an accident.
Manual recording
Using the button Press and hold this button.
Via iDrive
1."Apps"2."Drive Recorder"3."Start recording"
To stop the recording: "Cancel". Recording can also be started by selecting the
widget on the Control Display.
Recording playback and
administration
Stored video recordings can be played back, exported and deleted.
For your own safety, the video recording is
only displayed on the Control Display up to ap

During the display, various settings can be se

Displaying Speed Limit Info
General information Depending on the vehicle equipment, SpeedLimit Info is displayed permanently in the in

Changing the speed
Press the rocker switch up or down repeatedly
until the desired speed is set.
If active, the displayed speed is stored and
the vehicle reaches the stored speed when the road is clear.

Setting the functionWhen the system is active, press the
button repeatedly until the desired function is selected in the toolbar. The
toolbar for Assisted Driving mode is displayed
at the bottom of the instrument cluster.IconFunctionCruise Control with Distance Control.Depending on the equipment version,
cruise control with distance control
and Steering Assistant.
The selected function is shown in green.
Turning on
With Steering Assistant:
1. Press the button on the steering
wheel.2. If necessary, set the cruise control.
Without Steering Assistant:
Press the button on the steering
wheel.
The indicator lights in the instrument cluster light up and the mark on the speedometer is
set to the current speed.
Cruise control is active. The current speed is
maintained and stored as set speed.
If necessary, the Dynamic Stability Control willbe turned on.
Turning off
To switch off the system while stationary, step on brake pedal at the same time.
Press the button on the steering wheel:
With Steering Assistant.
Without Steering Assistant.
The displays turn off. The stored set speed is deleted.
Interrupting manually When active, press the button on the steering
wheel:
With Steering Assistant.
Without Steering Assistant.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in the
following situations:

Adjusting the speedMaintaining and storing the speed
Press the rocker switch up or down once while
the system is interrupted. The system will be activated.
The current speed is maintained and stored as desired speed.
The stored speed is displayed on the speed

Distance to vehicle ahead of you
Selected distance to the vehicle ahead of you
is shown.IconDescriptionDistance 1Distance 2Distance 3Distance 4
This value is set automatically
after the system is switched
on.No distance control display, as
the accelerator pedal is being
pressed.
Detected vehicle
IconDescriptionGreen icon:
A vehicle has been detected
ahead of you.
When the distance to the detected vehicle in

Alternative displaysIconDescriptionIndicator light green: system is
active.
No indicator light: system is
switched off.Vehicle icon flashes:
The conditions are not ade

displayed in the Assisted Driving View in thecentral display area of the instrument cluster.
Additional information:
Assisted Driving View, refer to page 155.
Alternative displays Depending on the equipment version, the dis

Displays in the Head