headlight BMW X5 2000 E53 Xenon Lights Instalation Instruction Manual

Fold out folded page 2-147.
2.8 To remove the manual headlight adjustment control system (ECE cars only)
A
Remove the fresh air grille (1).
Remove the light control (2) with the manual headlight adjustment control system (3) and replace it with the light
control in the parts kit.
To install the parts proceed in reverse order.
2.9 To install the xenon headlights
The procedure is shown for the right-hand side of the car, proceed accordingly on the left-hand side.
B
Take the holder with the integral control module (4) off the xenon headlight (5).
The control module (4) is connected to the headlight by a cable (6).
Position the holder and integral control module (4) in the car with the screws (7), position. Align and secure the
xenon headlight (5).
Connect all the plug connectors.
On US cars also connect the 4-pin plugs X1034 and X1035 (branches Hand Kon the xenon wiring harness)
to the servo motors.
2.10 To affix the warning sticker
C
The procedure is shown for the right-hand side of the car, proceed accordingly on the left-hand side.
Clean the cross traverse (8) and affix the warning sticker (9).
2.11 To assemble the car
Assemble the car by replacing all the parts you removed, but in reverse order.
2.12 Coding
This retrofit system is coding-relevant.
The coding is required to ensure that the retrofit system is fully functional and to rule out the possibility of
malfunctions and faults when it works in conjunction with other electrical systems in the car.
In addition the retrofit system is saved in the central code of the IKE (integrated combination electronics)/
instrument combination.
The coding work is to be completed using the DIS/MoDIC and is performed automatically in the "Retrofit" path
using the latest coding program.
The procedure is user-guided. Refer to the text instructions as you go through the various stages.
Print out the error memory and conduct a function test.
2.13 Function test
When you switch on the dipped headlights, the headlights must adjust automatically.
Check the function of the automatic headlight adjustment control system by loading the front and rear of the car.
EN/2-133

2.14 To adjust the xenon headlights
Check the standard adjustment of the headlights as described by the manufacturer and adjust it if necessary.
2-134/EN

3.1 Circuit diagram (for ECE cars only)
Fold out folded page 3-9.
A3 Light module
A52 ABS/DSC control module
A53 Headlight adjustment control system (LWR) control module
B42 Load sensor at the rear right
B64 Load/level sensor at the front right
M80 Headlight servo motor, left
M81 Headlight servo motor, right
X1B* Black 10-pin plug
X1S* Black 10-pin plug
X596 Terminal 31 connector
X991 26-pin plug, Bordeaux
X1034 4-pin plug, natural (left headlight)
X1035 4-pin plug, natural (right headlight)
X1170 42-pin plug, natural (ABS/ASC control module)
X1451 6-pin plug, black (level sensor, rear right)
X1608* Terminal 31 connector
X10116 K-bus connector
X10117 54-pin plug, black (light module)
X10275 6-pin plug, black (level sensor, front right)
X10466* K-bus connector
The components marked "*" only refer to this circuit diagram, all other components refer to the BMW dealer
organisation circuit diagram.
The cables marked ”#” are in the vehicle wiring harness and are not supplied with the xenon light retrofit kit.
Cable colours
BL = blue
BR = brown
GE = yellow
GN = green
GR = grey
RT = red
SW = black
WS = white
EN/3-3

3.2 Circuit diagram (for US cars only)
Fold out folded page 3-19.
A3 Light module
A52 ABS/DSC control module
A53 Headlight adjustment control system (LWR) control module
B42 Load sensor at the rear right
B64 Load/level sensor at the front right
M80 Headlight servo motor, left
M81 Headlight servo motor, right
X596 Terminal 31 connector
X991 26-pin plug, Bordeaux
X1034 4-pin plug, natural (left headlight)
X1035 4-pin plug, natural (right headlight)
X1170 42-pin plug, natural (ABS/ASC control module)
X1451 6-pin plug, black (level sensor, rear right)
X1608* Terminal 31 connector
X10116 K-bus connector
X10117 54-pin plug, black (light module)
X10275 6-pin plug, black (level sensor, front right)
X10466* K-bus connector
The components marked "*" only refer to this circuit diagram, all other components refer to the BMW dealer
organisation circuit diagram.
Cable colours
BL = blue
BR = brown
GE = yellow
GN = green
GR = grey
RT = red
SW = black
WS = white
3-12/EN