BMW Z4 COUPE 2008 E86 Service and warranty information

Engine Compartment Z4 Roadster
3.0i, 3.0si
Z4 Coupe 3.0si
Read out diagnostic system. •
Check engine cooling system/heater hose connections for leaks. Check coolant level
and antifreeze protection level. Add coolant if required. •
Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if
required. •
Check air conditioner for operation. •
Replace microfilter (Note: reduce replacement interval in dusty operating conditions). •
Reset service interval indicator. •
Check brake fluid level. Add fluid if needed. •
Body/Electrical
Check battery state-of-charge indicator and charge if required. •
Check lighting system, i.e.: headlights, foglights, parking, back-up, license plate,
interior (including map reading lights), glove box, flashlight, illuminated makeup
mirrors, luggage compartment lights. •
Check instrument panel and dashboard illumination. •
Check all warning/indicator lights, check control. •
Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer
and flasher switch. •
Check wipers and washer system(s); wiper blades, washer jet positions. •
Check condition and function of safety belts. •
Visually examine all SRS airbag units for torn covers, obvious damage or attachment
of decals, decorations or accessories. •
Check central locking/double lock. •
Check operation of all latches. •
Check heater/air conditioner blower, rear window defogger. •
Check rear view mirrors. •
Final Inspection
Road test with check of brakes, suspension, steering, clutch/manual transmission or
automatic transmission. •
7

Inspection II
Includes all items listed under Inspection I, and the following checks and maintenance operations.
Engine Compartment Z4 Roadster
3.0i, 3.0si
Z4 Coupe 3.0si
Replace air cleaner element. (Note: Reduce replacement interval in dusty operating
conditions). •
Brake Fluid Service
Replace brake fluid every 2 years (time interval begins from the vehicle’s production
date). •
Oxygen Sensor Service
Replace Oxygen Sensor every 120,000 miles.
•
Spark Plug Service
Replace spark plugs every 100,000 miles. •
Automatic Transmission Service
Replace ATF every 100,000 miles. •
8

Emission Control Maintenance Schedule: BMW Z4 Roadster 3.0i, 3.0si
and Z4 Coupe 3.0si
The maintenance schedule as shown is required
for the proper functioning of the emission con-
trol systems for optimum vehicle performance
and fuel economy.
Abbreviations:
I - Inspect
R - Replace part(s) and/or fluid listed
Basic Engine
Engine oil .........................
Engine oil filter .....................
Fuel System
Air filter ..........................
Ignition System
Spark plugs .......................
Emission Control Components
Oxygen sensor .....................
BMW Z4 Roadster
3.0i/3.0si
Z4 Coupe 3.0si
Oil Service
Inspection I
Oil Service
Inspection II
R
R R
R R
R R
R
R
Replace at intervals of 100,000 miles
Replace at intervals of 120,000 miles
Oxygen Sensor Service: The oxygen sensor deteriorates strictly on a mileage basis and must there-
fore be replaced to maximize vehicle fuel economy and minimize exhaust pollution.
The mileage interval varies according to individual driving conditions and is determined by the service
interval indicator.
9

Speedometer
(Odometer Memory)
changed:
MileageDate
Record of Spark Plug
Replacement (Every 100,000 Mi. ) Record of Oxygen Sensor
replacement (Every 120,000 Miles) Record of
brake/clutch
fluid changes
(Every 2 years) Record of
ATF change (Every
100,000 Mi.)
Date Mileage Date Mileage Date Mileage
Speedometer
(Odometer Memory)
changed:
Mileage
Date
10

BMW Engine Oil Service stamps
11

12

13

Battery Care
If your car is driven only for short distances of
less than 10 miles over a prolonged period of
time, without an occasional drive at highway
speeds, the engine’s charging system will not
maintain the battery. Insufficient use of the vehi-
cle could result in short term starting problems
and in the long term could damage the battery.
In case the car is not operated for more than
four weeks it is advisable to:
 consider using a proper trickle charger, fol-
lowing the charger manufacturer’s instruc-
tions, to maintain the battery’s state of
charge; or
 consult your BMW center regarding battery
removal. Once removed, the battery must be
charged and stored in a cool, dry place where
it can be protected from freezing. If the bat-
tery will be stored for over 3 months, it must
be recharged every 3 months, or else it will
become damaged and useless.
Please consult with your BMW center for further
guidance and information.
Corrosion Protection
Extensive corrosion protection measures imple-
mented by BMW now make it possible to offer a
twelve-year limited anti-corrosion warranty
against rust perforation on your vehicle provided
that the vehicle is maintained in accordance
with the provisions of the New Vehicle Limited
Warranty as outlined in the Warranty Section of
this Statement (page 29).
The major degree of corrosion protection is due
to the electrophoretic dip painting process
which cathodically deposits paint particles on all
body parts, attracting paint particles into the
minutest cavities or seams. Body parts are
designed to provide optimum corrosion
protection.
During manufacture, exterior body parts receive
an additional corrosion protection coat. Hood,
trunk, doors and other body parts with metal
folds are coated with PVC and sealed from the
outside. All floor panels receive a resilient coating of PVC
for maximum protection against damage due to
stones, etc.
Corrosion protection materials tested over many
years are applied to the surfaces of cavities and
to the entire underside of the vehicle during and
after assembly.
Requirements for maintaining the twelve year
unlimited mileage anti-corrosion warranty are
outlined in the Warranty Section of this State-
ment (page 31).
Restoring corrosion protection
Please take care that anti-corrosion material is
replaced when your car is repaired after body or
chassis damage.
BMW NA will not accept any liability for any
parts and accessories not approved by
BMW.
Underbody maintenance
The underbody has to be cleaned at least once
a year, in spring, with plain water in order to
remove mud, chemical sediments and other
deposits. If those materials are not removed,
corrosion (rust) will occur.
Your BMW center will do this anti-corrosion ser-
vice for you.
Do not apply additional undercoating or
rust-proofing on or near the exhaust
manifold, exhaust pipes, catalytic converter or
heat shields. During driving, the substance used
for undercoating could overheat and cause a
fire.
14

15

16