seats BUICK CASCADA 2017 Get To Know Guide

5
Front Seats
A. Seat Adjustment
Move the horizontal control to move the seat forward or rearward and to tilt, raise or lower the seat.
B. Seatback Recline Adjustment
Move the vertical control to recline or raise the seatback.
C. Lumbar Support Adjustment
Press the rear control to adjust the amount of lumbar support.

The safety belt presenter will move the front seat safety belts forward for easier access after the doors are closed. The
presenter retracts once the safety belts have been latched.

See Seats and Restraints in your Owner Manual.
Power Driver’s Seat
Safety Belts
Front Head Restraint Adjustment
To raise or lower a front head restraint, press the button on the side of the head restraint and move the head restraint up or down.
To move a front head restraint
forward, pull the front part of the restraint forward.
To move a front head restraint rear-ward, pull the front part of the restraint forward completely until the mecha-nism releases and it returns to the fully rearward position.
ABC

6
Rear Seats
Steering Wheel Adjustment
Rear Seat Easy Access
To fold a front seatback for access to the rear seat, lift the seat release lever on top of the front seatback and fold the seatback forward. The seat will slide forward automatically.
To raise a front seatback to its upright position, lift up the seatback until it locks. The seat will slide back automatically.
Note: If the seat encounters an obstruction, it will stop and then move in the opposite direction.
Folding Rear Seats
1. Unbuckle the safety belt.
2. Press the button (A) on either side of the trunk.
3. The seatback folds down automatically.
With the vehicle parked, push down the lever on the left side of the steering column to adjust the steering wheel. The steering wheel can then be moved up or down and in or out. Pull up the lever to lock the steering wheel in place.
See Seats and Restraints in your Owner Manual.
See Instruments and Controls in your Owner Manual.
A

19
Convertible Top Wind DeflectorsF
The wind deflectors are located in a bag behind the rear seatbacks. The small wind deflector fits between the rear head restraints. The large wind deflector installs behind the front seats.
Small Wind Deflector Installation
1. Lower the rear seatbacks.
2. Slide the cover between the rear head restraints toward the driver’s side of the vehicle to remove it.
3. Insert the small wind deflector (A) into the channel and slide it toward the pas-senger’s side of the vehicle until it locks.
4. Raise the rear seatbacks.
Large Wind Deflector InstallationNote: The rear seat cannot be occupied with the large wind deflector installed.
1. On each corner of the wind deflector, turn out the upper locking pins (B) and lift the detents to release the lower locking pins (C).
2. Open the wind deflector.
3. Insert the pins into the side recesses (D) on the passenger’s side of the vehicle.
4. Slightly fold the deflector and insert the pins into the side recesses on the driver’s side of the vehicle.
5. Push down the center of the deflector to fully engage the pins.
6. Fold the deflector to the vertical position.
Stowing the Wind Deflectors
Stow the wind deflectors in the stowage bag when not in use. Place the bag behind the rear seatbacks and secure the bag with the straps.
See Keys, Doors and Windows in your Owner Manual.
C
B
C
A
D
D
F Optional equipment
B