clock reset BUICK CENTURY 1993 Owners Manual

WAN: Press to listen for a few seconds to the next
station on the
AM or FM band; the scan will continue
every
few seconds until you press SCAN again to stop on
a particular station.
SEEK: Each time you press SEEK, you will tune in the
next station on the
AM or FM radio band.
To Set the Clock:
1. With the radio on or off, press SET. The SET
indicator will appear on the digital display for five
seconds.
2. You must begin to set the clock to the correct hour and
minute during those five seconds. Press and hold
SCAN until the correct hour appears on the display.
3. Press and hold SEEK until the correct minute appears
on the display.
To Preset Radio Stations:
1. Use the lower knob (TUNE) to tune in the station you
want.
2. Press SET. The SET indicator will appear on the
digital screen for five seconds.
3. While the SET indicator is displayed, press one of the
four pushbuttons.
4. Repeat steps 1-3 for each of four AM and four FM
stations.
Up to
three additional stations on each band may be
preset by “pairing” pushbuttons:
1. Tune in the desired station.
2. Press SET, and within five seconds press any two
adjacent pushbuttons at
the same time.
3. The station can be tuned in when the same two
pushbuttons
are pressed at the same time.
ProCarManuals.com

To Set the Clock:
1. With the radio on or off, press SET. The SET
indicator will appear on the digital display for five
seconds.
2. You must begin to set the clock to the correct hour and
minute during those
five seconds. Press and hold
SCAN until the correct hour appears on the display.
3. Press and hold SEEK until the correct minute appears
on the display.
To Preset Radio Stations:
1. Use the lower knob (TUNE) to tune in the station you
want.
2. Press SET. The SET indicator will appear on the
digital screen for
five seconds.
3. While the SET indicator is displayed, press one of the
4. Repeat steps 1-3 for each of five AM and five FM
Up to three additional stations on each band may be
preset by “pairing” pushbuttons:
five pushbuttons.
stations.
1. Tune in the desired station.
2. Press SET, and within five seconds press any two
adjacent pushbuttons at the same time.
3. The station can be tuned in when the same two
pushbuttons are pressed at the same time.
l21
ProCarManuals.com

RCL (Recall): Press to alternate the display between the
time and station frequency. When the ignition is off,
press
to display the time.
BASS: Press this button up or down to increase or
decrease the bass level. Press the center of the button for
the hctory preset level.
TREB (Treble): Press this button up or down to increase
or decrease the treble level. Press the center of the button
for the
factory preset level. If a station is weak or noisy,
reduce the treble.
To Set the Clock:
1. With the radio on or off, press SET. The SET
indicator will appear on the digital display for five
seconds.
2. Within those five seconds, press and hold SCAN until
the correct hour appears on the display.
3. Before another five seconds pass, press and hold
4SEEK or SEEK, until the correct minute appears
on the display.
124
ProCarManuals.com

To Preset Radio Stations:
The five pushbuttons at the lower right can be used to
preset up to ten radio stations (five AM and five FM).
The buttons have other uses
when you are playing a
compact disc.
1. Tune the digital display to the station you want.
2. Press SET. The SET indicator will appear on the
digital screen for five seconds.
3. While the SET indicator is displayed, press one of the
five pushbuttons.
4. Repeat steps 1-3 for each of five AM and five FM
stations.
To Play a Compact Disc:
Many of the controls for the radio also have functions for
the compact disc player, as explained here.
Don’t use mini-discs that are called singles. They won’t
eject. Use
only full-size compact discs.
1. Press PWR to turn the radio on.
2. Insert a disc part-way into the slot, with the label side
up. The player will pull it in.
In a few seconds, the
disc should play.
If the disc comes back out and/or
Err appears on the
display:
The disc may be upside down.
0 The disc may be dirty, scratched or wet.
There may be too much moisture in the air (wait about
The player may be too hot, or the road may be too
one hour and try again).
rough
for the disc to play.
As soon as things get back to
normal, the disc should play.
While a disc is playing, the
CD indicator is displayed on
the digital screen, as is the clock.
ProCarManuals.com