mirror controls BUICK ENCORE 2013 Get To Know Guide

2
Driver Information Center Controls (on lever)
Cruise Control/
Forward Collision AlertF Buttons Driver
Information Center
Storage
Compartment
Instrument Panel
Illumination Control Audio Steering
Wheel Controls Windshield
Wipers Lever
Exterior Lamps Control
Power Mirrors
Control
Instrument Panel
Power Steering
Traction Control Off

Engine Coolant
Temperature
Brake System
Cruise Control Set
Low Tire Pressure
StabiliTrak Active

StabiliTrak Off
Security
Check Engine
Oil Pressure
Charging System
Safety Belt Reminder
Airbag Readiness
Antilock Brake System
Lane Departure Warning
Lights On

Forward Collision Alert
Tilt/Telescope
Steering Wheel Lever
Instrument Cluster Symbols

5
Power Driver’s SeatA. Lumbar Adjustment
Press the small control to adjust the
lumbar support.
B. 6-way Seat Adjustment
Move the large control to move the seat
forward or rearward and to tilt, raise or
lower the seat.
C. Seatback Recline Adjustment
Lift the lever to adjust the seatback
position.
D. Memory Seat Controls
Seats
See Seats and Restraints in your Owner Manual.
Memory SeatF
Set Memory Positions
1. Adjust the driver’s seat and power outside mirrors to the desired positions.
2. Press and hold the Memory button and button 1 (D) on the outboard side of the driver’s
seat until a beep sounds.
3. Repeat these steps using button 2 for a second driver.
Recall Memory Positions
Press and hold button 1 or 2 until the stored position is reached.
Note: Open Vehicle Settings in the Configuration menu to change the memory seat settings.
Folding Front Passenger Seat
Pull up the recline lever on the outboard side of the passenger’s front seat to fold the
seat flat.
Folding Rear Seats 1. Unbuckle the safety belts and return
them to their normal stowed position.
2. Lower the head restraints.
3. Pull up the tab (A) located at the center
front of the seat cushion.
4. Pull up the rear edge of the seat cush-
ion and tilt it forward.
5. Press the lever (B) on top of the seat-
back. When the red marking is visible,
the seatback is unlatched.
6. Fold down the seatback.
7. When unfolding the seats, make sure
the safety belt buckles are accessible
above the seat cushions.
F Optional equipment
ABC
D
B
A
A

12
Climate Controls
Driver’s
Heated Seat
Control
FDefog Mode Passenger’s
Temperature
ControlF

Passenger’s
Heated Seat
Control
FFloor Mode
Driver’s
Temperature ControlVent Mode
Air
Conditioning ControlRecirculation Mode Fan Speed Control/OffDefrost Mode AUTOF:
Automatic OperationRear Window/
Outside Mirror DefoggerHeated
Steering
Wheel
F
F Optional equipment
Automatic Dual Zone OperationF
1. Press AUTO.
2. Set the temperature for the driver and front passenger. Allow time for t\
he system to
automatically reach the desired temperature.
If the air delivery mode or fan speed is adjusted manually, automatic operation is canceled.
The three air delivery mode buttons can be selected in any combination.
To turn off the system, continually press the Fan Speed Control until all lights are off.
Recirculation Mode
The
Recirculation Mode can help to quickly cool the air inside the vehicle or prevent
outside odors from entering the vehicle. It is not available while the Defog or Defrost Mode
is selected. When the Recirculation Mode is used without air conditioning, the air humidity
increases and the windows may fog.
See Climate Controls in your Owner Manual.
Dual Automatic Climate Controls shown