wheel CADILLAC CATERA 2000 1.G Workshop Manual

CADILLAC CATERA 2000 1.G Workshop Manual CATERA 2000 1.G CADILLAC CADILLAC https://www.carmanualsonline.info/img/23/7854/w960_7854-0.png CADILLAC CATERA 2000 1.G Workshop Manual

Page 286 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-42 Buying New Tires
To find out what kind and size of tires you need, 
look at the Tire
-Loading Information label.
The tires installed on your vehicle when it was new had
a Tire Performance Criteri

Page 288 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-44
Temperature -- A, B, C
The temperature grades are A (the highest), B, and C,
representing the tires resistance to the generation of
heat and its ability to dissipate heat when tested under
contr

Page 289 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-45
Each new wheel should have the same load-carrying
capacity, diameter, width, offset and be mounted the
same way as the one it replaces.
If you need to replace any of your wheels or wheel
bolts, r

Page 290 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-46 Tire Chains
NOTICE:
If your vehicle has 235/45R17 size tires, dont 
use tire chains. They can damage your vehicle
because theres not enough clearance.
Use another type of traction device only i

Page 296 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-52
Foreign materials such as calcium chloride and other
salts, ice melting agents, road oil and tar, tree sap, bird
droppings, chemicals from industrial chimneys, etc., 
can damage your vehicles fi

Page 298 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-54
GM Vehicle Care/Appearance Materials
PART NUMBERSIZEDESCRIPTIONUSAGE
99495423 in. x 25 in.Polishing Cloth ± Wax TreatedExterior polishing cloth
105017216 oz. (0.473 L)Tar and Road Oil RemoverRem

Page 302 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-58
Instrument Panel Fuse Block (Drivers Side)
The fuse block is located below the steering wheel on
the drivers side. Using a screwdriver, loosen the two
trim fasteners under the trim panel and pu

Page 308 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 6-64 Wheel Bolt Torque
80 lb-ft (110 N´m)
Engine Specifications
Displacement 181 cubic inches (2 962 cc). . . . . . . . . 
Type 3.0 L DOHC V6. . . . . . . . . . . . . . . . . . . . . . . . . 
VIN Eng

Page 313 of 321

CADILLAC CATERA 2000 1.G Workshop Manual 7-5
GM Mobility Program for Persons
with Disabilities
This program, available to
qualified applicants, can
reimburse you up to $1,000
toward aftermarket driver 
or passenger adaptive
equipment you may
Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60