phone CADILLAC ESCALADE 2010 3.G User Guide

4. Say the name of the phone to be deleted. If thephone name is unknown, use the“List”commandfor a list of all paired phones. The system respondswith“Would you like to delete ? Yesor No”followed by a tone.
5. Say“Yes”to delete the phone. The systemresponds with“OK, deleting ”.
Linking to a Different Phone
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Bluetooth”. The system responds with“Bluetooth ready”followed by a tone.
3. Say“Change phone”. The system responds with“Please wait while I search for other phones”.
.If another phone is found, the response will be“ is now connected”.
.If another phone is not found, the originalphone remains connected.
Storing Name Tags
The system can store up to thirty phone numbers asname tags that are shared between the Bluetooth andOnStar systems.
The system uses the following commands to store andretrieve phone numbers:
.Store
.Digit Store
.Directory
Using the Store Command
The store command allows a phone number to bestored without entering the digits individually.
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Store”. The system responds with“Store,number please”followed by a tone.
3. Say the complete phone number to be stored atonce with no pauses.
.If the system recognizes the number itresponds with“OK, Storing”and repeats thephone number.
.If the system is unsure it recognizes the phonenumber, it responds with“Store”and repeatsthe number followed by“Please say yes or no”.If the number is correct, say“Yes”. If thenumber is not correct, say“No”. The system willask for the number to be re!entered.
4-70

4. After the system stores the phone number, itresponds with“Please say the name tag”followedby a tone.
5. Say a name tag for the phone number. The nametag is recorded and the system responds with“About to store . Does thatsound OK?”.
.If the name tag does not sound correct, say“No”and repeat Step 5.
.If the name tag sounds correct, say“Yes”andthe name tag is stored. After the number isstored the system returns to the main menu.
Using the Digit Store Command
The digit store command allows a phone number to bestored by entering the digits individually.
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Digit Store”. The system responds with“Please say the first digit to store”followed bya tone.
3. Say the first digit to be stored. The system willrepeat back the digit it heard followed by a tone.Continue entering digits until the number to bestored is complete.
.If an unwanted number is recognized by thesystem, say“Clear”at any time to clear the lastnumber.
.To hear all of the numbers recognized by thesystem, say“Verify”at any time and the systemwill repeat them.
4. After the complete number has been entered, say“Store”. The system responds with“Please say thename tag”followed by a tone.
5. Say a name tag for the phone number. The nametag is recorded and the system responds with“About to store . Does thatsound OK?”.
.If the name tag does not sound correct, say“No”and repeat Step 5.
.If the name tag sounds correct, say“Yes”andthe name tag is stored. After the number isstored the system returns to the main menu.
4-71

Using the Directory Command
The directory command lists all of the name tags storedby the system. To use the directory command:
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Directory”. The system responds with“Directory”and then plays back all of the storedname tags. When the list is complete, the systemreturns to the main menu.
Deleting Name Tags
The system uses the following commands to deletename tags:
.Delete
.Delete all name tags
Using the Delete Command
The delete command allows specific name tags to bedeleted.
To use the delete command:
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Delete”. The system responds with“Delete,please say the name tag”followed by a tone.
3. Say the name tag to be deleted. The systemresponds with“Would you like to delete, ? Please say yes or no”.
.If the name tag is correct, say“Yes”to deletethe name tag. The system responds with“OK,deleting , returning to themain menu.”
.If the name tag is incorrect, say“No”. Thesystem responds with“No. OK, let's try again,please say the name tag.”
Using the Delete All Name Tags Command
The delete all name tags command deletes all storedphone book name tags and route name tags for OnStar(if present).
To use the delete all name tags command:
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Delete all name tags”. The system respondswith“You are about to delete all name tags storedin your phone directory and your route destinationdirectory. Are you sure you want to do this? Pleasesay yes or no.”
.Say“Yes”to delete all name tags.
.Say“No”to cancel the function and return tothe main menu.
4-72

Making a Call
Calls can be made using the following commands:
.Dial
.Digit Dial
.Call
.Re!dial
Using the Dial Command
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Dial”. The system responds with“Dial using”.“Number please”followed bya tone.
3. Say the entire number without pausing.
.If the system recognizes the number, itresponds with“OK, Dialing”and dials thenumber.
.If the system does not recognize the number, itconfirms the numbers followed by a tone. If thenumber is correct, say“Yes”. The systemresponds with“OK, Dialing”and dials thenumber. If the number is not correct, say“No”.The system will ask for the number to bere!entered.
Using the Digit Dial Command
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Digit Dial”. The system responds with“Digitdial using , please say the first digitto dial”followed by a tone.
3. Say the digit to be dialed one at a time. Followingeach digit, the system will repeat back the digit itheard followed by a tone.
4. Continue entering digits until the number to bedialed is complete. After the whole number hasbeen entered, say“Dial”. The system respondswith“OK, Dialing”and dials the number.
.If an unwanted number is recognized by thesystem, say“Clear”at any time to clear the lastnumber.
.To hear all of the numbers recognized by thesystem, say“Verify”at any time and the systemwill repeat them.
Using the Call Command
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Call”. The system responds with“Call using. Please say the name tag”followedby a tone.
4-73

3. Say the name tag of the person to call.
.If the system clearly recognizes the name tag itresponds with“OK, calling, ”anddials the number.
.If the system is unsure it recognizes the rightname tag, it confirms the name tag followed bya tone. If the name tag is correct, say“Yes”.The system responds with“OK, calling, ”and dials the number. If the name tag isnot correct, say“No”. The system will ask forthe name tag to be re!entered.
Once connected, the person called will be heardthrough the audio speakers.
Using the Re!dial Command
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. After the tone, say“Re!dial”. The system respondswith“Re!dial using ”and dials thelast number called from the connected Bluetoothphone.
Once connected, the person called will be heardthrough the audio speakers.
Receiving a Call
When an incoming call is received, the audio systemmutes and a ring tone is heard in the vehicle.
.Pressbgand begin speaking to answer the call.
.Presscxto ignore a call.
Call Waiting
Call waiting must be supported on the Bluetooth phoneand enabled by the wireless service carrier to work.
.Pressbgto answer an incoming call when
another call is active. The original call is placedon hold.
.Pressbgagain to return to the original call.
.To ignore the incoming call, continue with theoriginal call with no action.
.Presscxto disconnect the current call and
switch to the call on hold.
4-74

Three!Way Calling
Three!Way Calling must be supported on the Bluetoothphone and enabled by the wireless service carrierto work.
1. While on a call pressbg. The system responds
with“Ready”followed by a tone.
2. Say“Three!way call”. The system responds with“Three!way call, please say dial or call”.
3. Use the dial or call command to dial the number ofthe third party to be called.
4. Once the call is connected, pressbgto link all
the callers together.
Ending a Call
Presscxto end a call.
Muting a Call
During a call, all sounds from inside the vehicle can bemuted so that the person on the other end of the callcannot hear them.
To Mute a call
1. Pressbg. The system responds with“Ready”
followed by a tone.
2. Say“Mute Call”. The system responds with“Callmuted”.
To Cancel Mute
1. Pressbg. The system responds with“Ready”
followed by a tone.
2. After the tone, say“Mute Call”. The systemresponds with“Resuming call”.
Transferring a Call
Audio can be transferred between the in!vehicleBluetooth system and the cell phone.
To Transfer Audio to the Cell Phone
During a call with the audio in the vehicle:
1. Pressbg. The system responds with“Ready”
followed by a tone.
2. Say“Transfer Call.”The system responds with“Transferring call”and the audio will switch fromthe vehicle to the cell phone.
4-75

To Transfer Audio to the In-Vehicle
Bluetooth System
The cellular phone must be paired and connected withthe Bluetooth system before a call can be transferred.The connection process can take up to two minutesafter the key is turned to the ON/RUN or ACC/ACCESSORY position.
During a call with the audio on the cell phone,
pressbgfor more than two seconds. The audio
switches from the cell phone to the vehicle.
Voice Pass-Thru
Voice Pass!Thru allows access to the voice recognitioncommands on the cell phone. See the cell phonemanufacturers user guide to see if the cell phonesupports this feature. This feature can be used toverbally access contacts stored in the cell phone.
1. Press and holdbgfor two seconds. The system
responds with“Ready”followed by a tone.
2. Say“Bluetooth”. The system responds with“Bluetooth ready”followed by a tone.
3. Say“Voice”. The system responds with“OK,accessing ”.
.The cell phone's normal prompt messages willgo through its cycle according to the phone'soperating instructions.
Dual Tone Multi-Frequency (DTMF)
Tones
The in!vehicle Bluetooth system can send numbers andnumbers stored as name tags during a call. This is usedwhen calling a menu driven phone system. Accountnumbers can be programmed into the phonebook forretrieval during menu driven calls.
Sending a Number During a Call
1. Pressbg. The system responds with“Ready”
followed by a tone.
2. Say“Dial”. The system responds with“Say anumber to send tones”followed by a tone.
3. Say the number to send.
.If the system clearly recognizes the number itresponds with“OK, Sending Number”and thedial tones are sent and the call continues.
.If the system is not sure it recognized thenumber properly, it responds“Dial Number,Please say yes or no?”followed by a tone.If the number is correct, say“Yes”. The systemresponds with“OK, Sending Number”and thedial tones are sent and the call continues.
4-76

Sending a Stored Name Tag During a Call
1. Pressbg. The system responds with“Ready”
followed by a tone.
2. Say“Send name tag.”The system responds with“Say a name tag to send tones”followed by a tone.
3. Say the name tag to send.
.If the system clearly recognizes the name tag itresponds with“OK, Sending ”andthe dial tones are sent and the call continues.
.If the system is not sure it recognized the nametag properly, it responds“Dial ,Please say yes or no?”followed by a tone.If the name tag is correct, say“Yes”. Thesystem responds with“OK, Sending ”and the dial tones are sent and the callcontinues.
Clearing the System
Unless information is deleted out of the in!vehicleBluetooth system, it will be retained indefinitely. Thisincludes all saved name tags in the phonebook andphone pairing information. For information on how todelete this information, see the above sections onDeleting a Paired Phone and Deleting Name Tags.
Other Information
The Bluetooth®word mark and logos are owned by theBluetooth®SIG, Inc. and any use of such marks byGeneral Motors is under license. Other trademarks andtrade names are those of their respective owners.
SeeRadio Frequency Statementon page 9!20for FCCinformation.
Rear Seat Entertainment (RSE)
System (Overhead)
The vehicle may have an Overhead DVD Rear SeatEntertainment (RSE) system. The RSE system workswith the vehicle's audio system. The DVD player is partof the front radio. The RSE system includes a radio witha DVD player, a video display screen, and if the vehiclehas a third row seat, it could have a second videodisplay screen, audio/video jacks, two wirelessheadphones, and a remote control. SeeNavigationAudio Systemon page 5!60for more information onthe vehicle's audio/DVD system.
4-77

Driver Control of the Audio System
The driver has basic control of the whole audio system.
Press and holdOfor more than two seconds to turn off
the radio, RSE, and the RSA (rear seat audio). SeeNavigation Audio Systemon page 5!60for moreinformation.
Before Driving
The RSE is designed for rear seat passengers only. Thedriver cannot safely view the video screen while drivingand should not try to do so.
In severe or extreme weather conditions the RSEsystem might not work until the temperature is withinthe operating range. The operating range for the RSEsystem is above!4°F (!20°C) or below 140°F (60°C).If the temperature of the vehicle is outside of this range,heat or cool the vehicle until the temperature is withinthe operating range of the RSE system.
Headphones
The RSE includes two 2-channel wireless headphonesthat are dedicated to this system. Channel 1 isdedicated to the DVD player, while Channel 2 isdedicated to RSA selections. These headphones areused to listen to media such as CDs, DVDs, MP3s,DVDAs, radio, any auxiliary source connected toA/V jacks, or the auxiliary input jack, if the vehiclehas this feature. The wireless headphones have anOn/Off button, channel 1/2 switch, and a volumecontrol.
If the vehicle has a third row video screen display,it has two additional headphones.
Push the power button to turn on the headphones. Anindicator light located on the headphones comes on.If the light comes on but, there is intermittent soundand/or static on the headphones, or if the indicator lightdoes not come on, the batteries might need to bereplaced. See“Battery Replacement”later in thissection for more information. Switch the headphones toOff when not in use.
4-78

The infrared transmitters are located at the rear of theRSE overhead console. The headphones shut offautomatically to save the battery power if the RSEsystem and the RSA are shut off or if the headphonesare out of range of the transmitters for more than3 minutes. If you move too far forward or step out of thevehicle, the headphones lose the audio signal.
The headphones may automatically turn off afterfour hours of continuous use.
To adjust the volume on the headphones, use thevolume control located on the right side.
For optimal audio performance, the headphones mustbe worn correctly. Headphones should be worn withheadband over the top of the head for best audioreception. The symbol L (Left) appears on the upper leftside, above the ear pad and should be positioned onthe left ear. The symbol R (Right) appears on the upperright side, above the ear pad and should be positionedon the right ear.
Notice:Do not store the headphones in heat ordirect sunlight. This could damage the headphonesand repairs will not be covered by the warranty.Storage in extreme cold can weaken the batteries.Keep the headphones stored in a cool, dry place.
If the foam ear pads attached to the headphonesbecome worn or damaged, the pads can be replacedseparately from the headphone set. See your dealer/retailer for more information.
Battery Replacement
To change the batteries on the headphones:
1. Turn the screw to loosen the battery door locatedon the left side of the headphones. Slide thebattery door open.
2. Replace the two batteries in the compartment.Make sure that they are installed correctly, usingthe diagram on the inside of the batterycompartment.
3. Replace the battery door and tighten the doorscrew.
If the headphones are to be stored for a long period oftime, remove the batteries and keep them in a cool, dryplace.
4-79