ABS CADILLAC ESCALADE ESV 2008 User Guide

Parking on Hills
{ CAUTION: You really should not park your vehicle, with a
trailer attached, on a hill. If something goes
wrong, your rig could start to move. People
can be injured, and both your vehicle and the
trailer can be damaged.
But if you ever have to park your rig on a hill, here’s
how to do it:
1. Apply your regular brakes, but don’t shift into
PARK (P) yet.
2. Have someone place chocks under the trailer
wheels.
3. When the wheel chocks are in place, release the
regular brakes until the chocks absorb the load.
4. Reapply the regular brakes. Then apply your
parking brake and shift into PARK (P).
5. Release the regular brakes. When You Are Ready to Leave After
Parking on a Hill 1. Apply your regular brakes and hold the pedal down
while you:
start your engine,
shift into a gear, and
release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is clear of the chocks.
4. Stop and have someone pick up and store the
chocks.
Maintenance When Trailer Towing Your vehicle will need service more often when you’re
pulling a trailer. See the Maintenance Schedule for more
on this. Things that are especially important in trailer
operation are automatic transmission uid (don’t overll),
engine oil, axle lubricant, belts, cooling system and
brake system. Each of these is covered in this manual,
and the Index will help you nd them quickly. If
you’re trailering, it’s a good idea to review these sections
before you start your trip.
Check periodically to see that all hitch nuts and bolts
are tight.
4-55

Fabric/Carpet Use a vacuum cleaner with a soft brush attachment
frequently to remove dust and loose dirt. A canister
vacuum with a beater bar in the nozzle may only
be used on oor carpet and carpeted oor mats. For
soils, always try to remove them rst with plain water or
club soda. Before cleaning, gently remove as much
of the soil as possible using one of the following
techniques:
For liquids: gently blot the remaining soil with a
paper towel. Allow the soil to absorb into the
paper towel until no more can be removed.
For solid dry soils: remove as much as possible
and then vacuum.
To clean, use the following instructions:
1. Saturate a lint-free, clean white cloth with water or
club soda.
2. Wring the cloth to remove excess moisture.
3. Start on the outside edge of the soil and gently rub
toward the center. Continue cleaning, using a clean
area of the cloth each time it becomes soiled.
4. Continue to gently rub the soiled area until the
cleaning cloth remains clean.
5. If the soil is not completely removed, use a mild
soap solution and repeat the cleaning process
that was used with plain water. If any of the soil remains, a commercial fabric cleaner or
spot lifter may be necessary. When a commercial
upholstery cleaner or spot lifter is to be used, test a
small hidden area for colorfastness rst. If the locally
cleaned area gives any impression that a ring formation
may result, clean the entire surface.
After the cleaning process has been completed, a paper
towel can be used to blot excess moisture from the
fabric or carpet.
Leather A soft cloth dampened with water can be used to
remove dust. If a more thorough cleaning is necessary,
a soft cloth dampened with a mild soap solution can
be used. Allow the leather to dry naturally. Do not use
heat to dry. Never use steam to clean leather. Never
use spot lifters or spot removers on leather. Many
commercial leather cleaners and coatings that are sold
to preserve and protect leather may permanently
change the appearance and feel of your leather and are
not recommended. Do not use silicone or wax-based
products, or those containing organic solvents to clean
your vehicle’s interior because they can alter the
appearance by increasing the gloss in a non-uniform
manner. Never use shoe polish on leather.
5-100

Harness
Connector Usage
HEADLINER 3 Headliner Harness Connector 3
HEADLINER 2 Headliner Harness Connector 2
HEADLINER 1 Headliner Harness Connector 1
SEO/UPFITTER Special Equipment Option Uptter
Harness Connector
Circuit Breaker Usage
CB1 Passenger Side Power Window
Circuit Breaker
CB2 Passenger Seat Circuit Breaker
CB3 Driver Seat Circuit Breaker
CB4 Rear Sliding Window Underhood Fuse Block
The underhood fuse block is located in the engine
compartment, on the driver side of the vehicle.
To access the fuse/relay block, push in on the tabs on
the end of the fuse/relay block cover and lift.
Notice: Spilling liquid on any electrical components
on your vehicle may damage it. Always keep the
covers on any electrical component.
To remove fuses, hold the end of the fuse between your
thumb and index nger and pull straight out.
5-111

AAccessories and Modications ............................ 5-3
Adding Equipment to Your Airbag-Equipped
Vehicle ....................................................... 1-90
Additives, Fuel ................................................. 5-6
Add-On Electrical Equipment ........................... 5-108
Adjustable Throttle and Brake Pedal .................. 2-28
Air Cleaner/Filter, Engine ................................. 5-17
Air Conditioning .............................................. 3-26
Airbag
Passenger Status Indicator ........................... 3-37
Readiness Light .......................................... 3-36
Airbag System ................................................ 1-76
What Will You See After an Airbag Inates? .... 1-84
When Should an Airbag Inate? .................... 1-81
Where Are the Airbags? ............................... 1-78
Airbag Systems
Adding Equipment to Your Airbag-Equipped
Vehicle ................................................... 1-90
How Does an Airbag Restrain? ...................... 1-83
Passenger Sensing System ........................... 1-85
Servicing Your Airbag-Equipped Vehicle .......... 1-90
What Makes an Airbag Inate? ...................... 1-83
All-Wheel Drive ............................................... 5-45
All-Wheel-Drive (AWD) System ........................... 4-8
Analog Clock .................................................. 3-25
Antenna, Rear Side Window ........................... 3-109 Antenna, XM™ Satellite Radio Antenna
System ..................................................... 3-109
Antilock Brake System (ABS) ............................. 4-4
Antilock Brake, System Warning Light ................ 3-41
Appearance Care
Aluminum or Chrome-Plated Wheels ............. 5-104
Care of Safety Belts ................................... 5-101
Chemical Paint Spotting .............................. 5-105
Cleaning Exterior Lamps/Lenses .................. 5-102
Fabric/Carpet ............................................ 5-100
Finish Care ............................................... 5-102
Finish Damage .......................................... 5-105
Instrument Panel, Vinyl, and Other Plastic
Surfaces ............................................... 5-101
Interior
Cleaning .......................................... 5-98
Leather .................................................... 5-100
Sheet Metal Damage .................................. 5-105
Speaker Covers ......................................... 5-101
Tires ........................................................ 5-105
Underbody Maintenance ............................. 5-105
Vehicle Care/Appearance Materials ............... 5-106
Washing Your Vehicle ................................. 5-102
Weatherstrips ............................................ 5-101
Windshield, Backglass, and Wiper Blades ...... 5-103
Wood Panels ............................................ 5-101
Appointments, Scheduling Service ....................... 7-8
Ashtray ......................................................... 3-25
Assist Handles ............................................... 2-61
1