wipers CHERY TIGGO 2009 Service Repair Manual
[x] Cancel search | Manufacturer: CHERY, Model Year: 2009, Model line: TIGGO, Model: CHERY TIGGO 2009Pages: 1903, PDF Size: 33.38 MB
Page 1730 of 1903
Downloaded from www.Manualslib.com manuals search engine MIRRORS15-209
Description 15-209
Operation 15-209
Electrical Schematics 15-210
Outside Mirror 15-214
Removal & Installation 15-214
PAINT15-215
Paint Codes 15-215
Paint Codes 15-215
RADIATOR SUPPORT15-216
Radiator Support 15-216
Removal & Installation 15-216
STATIONARY GLASS15-217
Description 15-217
Electrical Schematics 15-218
Front Windshield 15-219
Removal 15-219
Installation 15-219
Rear Window 15-221
Removal 15-221
Installation 15-221
SUNROOF15-224
Description 15-224
Operation 15-225
Electrical Schematics 15-226
DIAGNOSIS & TESTING15-228
Sunroof Memory Relearn 15-228
ON-VEHICLE SERVICE15-229
Sunroof Glass 15-229
Removal & Installation 15-229Sunroof Sun Visor
15-229
Removal & Installation 15-229
Sunroof Motor 15-230
Removal & Installation 15-230
Sunroof Control Module 15-230
Removal & Installation 15-230
WEATHERSTRIP15-231
Front Door Weatherstrip 15-231
Removal & Installation 15-231
Rear Door Weatherstrip 15-232
Removal & Installation 15-232
WIPERS AND WASHERS15-233
Description 15-233
Operation 15-233
Electrical Schematics 15-234
Front Wiper Motor 15-238
Removal & Installation 15-238
Rear Wiper Motor 15-239
Removal & Installation 15-239
Front Wiper Arm 15-240
Removal & Installation 15-240
Rear Wiper Arm 15-240
Removal & Installation 15-240
Front Wiper Link 15-241
Removal & Installation 15-241
Washer Bottle 15-241
Removal & Installation 15-241
Washer Pump 15-241
Removal & Installation 15-241
Wiper Switch 15-242
Removal & Installation 15-242
BODY AND ACCESSORIES - BODY EXTERIOR
15–146Chery Automobile Co., Ltd.
Page 1817 of 1903
Downloaded from www.Manualslib.com manuals search engine WIPERS AND WASHERS
Description
The wiper system operates the front and rear wipers. The windshield wiper system includes the following compo-
nents:
•Wiper and Washer Switch
• Front Wiper Motor
• Rear Wiper Motor
• Front Wiper Arm
• Rear Wiper Arm
• Front Wiper Link
• Washer Bottle
• Washer Pump
Operation
The wiper system is controlled by the wiper and washer switch. The wiper and washer system operate with the
ignition switch is in the ON position. All wiper and washer functions are controlled by rotating the control knob on the
end of the control stalk to the MIST, OFF, INT, LO or HI wiper positions.
15
15–233Chery Automobile Co., Ltd.
Page 1818 of 1903
Downloaded from www.Manualslib.com manuals search engine Electrical Schematics
Wiper and Washer System (Page 1 of 4)
WIPERS AND WASHERS
LTSMW150013T
15–234Chery Automobile Co., Ltd.
Page 1819 of 1903
Downloaded from www.Manualslib.com manuals search engine Wiper and Washer System (Page 2 of 4)
WIPERS AND WASHERS
LTSMW150014T
15
15–235Chery Automobile Co., Ltd.
Page 1820 of 1903
Downloaded from www.Manualslib.com manuals search engine Wiper and Washer System (Page 3 of 4)
WIPERS AND WASHERS
LTSMW150083T
15–236Chery Automobile Co., Ltd.
Page 1821 of 1903
Downloaded from www.Manualslib.com manuals search engine Wiper and Washer System (Page 4 of 4)
WIPERS AND WASHERS
LTSMW150084T
15
15–237Chery Automobile Co., Ltd.
Page 1822 of 1903
Downloaded from www.Manualslib.com manuals search engine Front Wiper Motor
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the wiper arm protective caps for thewiper arm mounting nuts.
3. Remove the wiper arm mounting nuts (1). (Tighten: Wiper arm mounting nuts to 55 ± 3 N·m)
4. Remove two wiper arms.
5. Remove the lower trim panel of the front windshield.
6. Remove the wiper arm linkage mechanism mount- ing bolts (1).
(Tighten: Wiper arm linkage mechanism mounting
bolts to 10 ± 1 N·m)
7. Disconnect the wiper motor connector (2), and remove the linkage mechanism assembly.
8. Installation is in the reverse order of removal.
WIPERS AND WASHERS
LTSM150033
LTSM150034
15–238Chery Automobile Co., Ltd.
Page 1823 of 1903
Downloaded from www.Manualslib.com manuals search engine Rear Wiper Motor
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the rear wiper arm nut protective cap fromthe rear wiper arm.
3. Remove the wiper arm mounting nut (1), and remove the wiper arm, and the rubber ring.
(Tighten: Rear wiper arm mounting nut to 20 ± 3
N·m)
4. Open the back cargo door.
5. Remove the back door panel.
6. Disconnect the rear wiper motor electrical connec- tor (2), and the rear wiper motor mounting bolts
(1).
(Tighten: Rear wiper motor mounting bolts to 10 ±
1 N·m)
7. Remove the rear wiper motor.
8. Installation is in the reverse order of removal.
WIPERS AND WASHERS
LTSM150035
LTSM150036
15
15–239Chery Automobile Co., Ltd.
Page 1824 of 1903
Downloaded from www.Manualslib.com manuals search engine Front Wiper Arm
Removal & Installation
1. Remove the wiper arm protective caps for thewiper arm mounting nuts (1).
2. Remove the wiper arm mounting nuts. (Tighten: Wiper arm mounting nuts to 55 ± 3 N·m)
3. Remove two wiper arms (1).
Rear Wiper Arm
Removal & Installation
1. Remove the rear wiper arm nut protective cap from the rear wiper arm.
2. Remove the wiper arm mounting nut (1), and remove the wiper arm, and the rubber ring.
(Tighten: Rear wiper arm mounting nut to 20 ± 3
N·m)
3. Installation is in the reverse order of removal.
WIPERS AND WASHERS
LTSM150033
LTSM150035
15–240Chery Automobile Co., Ltd.
Page 1825 of 1903
Downloaded from www.Manualslib.com manuals search engine Front Wiper Link
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the left lower trim panel of the front wind-shield.
3. Remove the mounting bolts (1) and the front wiper motor electrical connector (2), then remove the
wiper link.
(Tighten: Wiper arm linkage mechanism mounting
bolts to 10 ± 1 N·m)
4. Installation is in the reverse order of removal.
Washer Bottle
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the front bumper (See Front Bumper Removal & Installation in Section 15 Body &
Accessories).
3. Disconnect the washer hose and the washer pump electrical connector.
4. Remove the mounting bolts (1) as shown to remove the washer bottle.
5. Installation is in the reverse order of removal.
Washer Pump
Removal & Installation
1. Disconnect the negative battery cable.
2. Remove the front bumper (See Front Bumper Removal & Installation in Section 15 Body & Accessories).
3. Disconnect the washer hose and the washer pump electrical connector.
4. Drain the washer fluid.
5. Remove the washer pump assembly.
6. Installation is in the reverse order of removal.
WIPERS AND WASHERS
LTSM150034
LTSM150101
15
15–241Chery Automobile Co., Ltd.