cruise control CHEVROLET ASTRO CARGO VAN 1995 2.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine Multifunction Lever
The lever on the driver’s side of the steering column includes your:
Turn Signal and Lane Change Indicator
0 Headlamp High-Low Beam
0 Windshield Wipers
0 Windshield Washer
Cruise Control (Option)
Turn Signal and Lane Change Indicator
The turn signal has
two upward (for
Right) and two
downward (for Left)
positions. These
positions allow you
to
signal a turn or a lane
change.
To signal a turn, move the lever all the way up or down. When the turn is
finished, the lever will return automatically.
2-30

Downloaded from www.Manualslib.com manuals search engine Cruise Control (Option)
I
With cruise control, you can maintain a speed of about 25 mph (40 km/h) or
more without keeping your foot
on the accelerator. This can really help on
long trips. Cruise control does not work at speeds below about
25 mph (40
km/h).
When you apply your brakes, the cruise control shuts off.
2-35

Downloaded from www.Manualslib.com manuals search engine To Set Cruise Control
I 1. Move the cruise
control switch
to
ON.
2. Get up to the speed you want.
3. Push in the set button at the end of the lever and release it.
4. Take your foot off the accelerator pedal.
To Resume a Set Speed
c
2-36

Downloaded from www.Manualslib.com manuals search engine Suppose you set your cruise control at a desired speed and then you apply
the brake. This,
of course, shuts off the cruise control. But you don’t need to
reset it. Once you’re going about
25 mph (40 kdh) or more, you can move
the cruise control switch from
ON to R/A (Resume/Accelerate) for about
half
a second.
You’ll go right back up to your chosen speed and stay there.
Remember, if you hold the switch at R/A (Resume/Accelerate) longer than
half a second, the vehicle will keep going faster
until you release the switch
or apply the brake. You could be startled and even lose control.
So unless
you want to
go faster, don’t hold the switch at R/A (Resume/Accelerate).
To lncrease Speed While Using Cruise Control
While your cruise control switch is in the ON position, here are two ways to
go
to a higher speed.
0 Use the accelerator pedal to get to the higher speed. Push the button at
the end
of the lever, then release the button and the accelerator pedal.
You’ll now cruise at the higher speed.
2-37

Downloaded from www.Manualslib.com manuals search engine Move the cruise switch from ON to WA (Resume/Accelerate). Hold it
there until
you get up to the speed you want, and then release the
switch.
To increase your speed in very small amounts, move the switch to R/A
(Resume/Accelerate). Each time you
do this, your vehicle will go about
1 mph (1.6 km/h) faster.
To Reduce Speed While Using Cruise Control
4
Push in the button at
the end of the lever
until you reach the
lower speed you want,
then release it.
To slow down in very small amounts, push the button for less than half a
second. Each time you do this, you’ll go 1 mph (1.6 km/h) slower.
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase your speed. When you take your foot
off
the pedal, your vehicle will slow down to the cruise control speed you
set earlier.
Using Cruise Control on Hills
How well your cruise control will work on hills depends upon your speed,
load, and the steepness
of the hills. When going up steep hills, you may
want
to step on the accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to
a lower gear to keep your speed
down. Of course, applying
the brake takes you out of cruise control. Many
drivers find this to be too much trouble and don’t use cruise control
on steep
hills.
2-38

Downloaded from www.Manualslib.com manuals search engine To Get Out of Cruise Control
There are two ways to turn off the cruise control:
0 Step lightly on
the brake pedal.
Move the cruise
switch to
OFF.
To Erase Speed Memory
When you turn off the cruise control or the ignition, your cruise control set
speed memory is erased.
2-39

Downloaded from www.Manualslib.com manuals search engine Instrument Cluster
Your instrument cluster is designed to let you know at a glance how your
vehicle is running. You’ll know how fast you’re going, about
how much
fuel remains, and many other things you’ll need to know to drive safely and
economically.
The optional digital cluster on your vehicle’s instrument panel
is displayed
electronically and will tell you everything the standard cluster does.
The digital cluster will give readings in either English or Metric. To switch
from English to Metric, just press the
EM button.
Instrument Panel
AB C DE ZF G H If Z
A. Light Switches
B. Dimmer Switch
C. Instrument Cluster
D. Gearshift Lever
E. Air ConditionerEIeater
E Remote Outside Mirror Switch
G. Rear Heater Switch
H. Rear A/C Switch
I. Interior Lamp Override Switch
J. Audio System
K. Convenience Tray
L. Glove Box
M. Ashtray
M L
N. Cigarette Lighter
0. Hood Release Handle
P. Hazard Warning Flasher
Q. Ignition Switch
R. Horn
S. Brake Release Handle
T. Multifunction Lever
U. Cruise Control
V. Tilt Wheel Lever
W. Rear Wipermasher Switch
X. Hatch Release Switch
Y. Rear Window Defogger Switch
Z. Vent
2-49

Downloaded from www.Manualslib.com manuals search engine NAME
HTR A/C
RADIO
ECM B
ECM I
PWR WDO
AIR BAG
WIPER
BRAKE
DRL** PWR
MIRRORS*
TRAILER*
CIRCUITS
PROTECTED
Front Heater &
Air
Conditioning
Radio
Engine Control
Module
Engine Control Module
Power
Windows
Air Bag
Windshield Wiper
Anti-Lock
Brake System,
Speedometer,
Cruise Control
Canadian Daytime
Running Lamps
rower Mirror
Trailer Wiring
Harness
FUSE
20 Amp
15 Amp
15 Amp
10 Amp
CIRCUIT
BREAKER
30 Amp
10 Amp
25 Amp
15 Amp
10 Amp
3 Amp
30 Amp
*In-line fuse
**Canada
only
***In-line fuse (certain models)
6-67

Downloaded from www.Manualslib.com manuals search engine Part C: Periodic Maintenance Inspections
Listed below are inspections and services which should be performed at
least twice a year (for instance, each spring and fall). You should let your
GM dealer’s service department or other qualified service center \
do these
jobs. Make sure any necessary repairs are completed
at once.
Steering and Suspension Inspection
Inspect the front and rear suspension and steering system for damaged,
loose or missing parts, signs of wear, or lack of lubrication. Inspect power
steering lines and hoses for proper hookup, binding, leaks, cracks, chafing,
etc. Lubricate the steering linkage.
Exhaust System Inspection
Inspect the complete exhaust system. Inspect the body near the exhaust
system.
Look for broken, damaged, missing or out-of-position parts as well
as open seams, holes, loose connections, or other conditions which could
cause a heat build-up in the floor pan
or could let exhaust fumes into the
vehicle. See “Engine Exhaust”
in the Index.
Accelerator Control System
Lubricate all pivot points with engine oil, except the TBI throttle shaft. Do
not lubricate the cam pulley. Remove all external deposits from pulley. Do
not oil any accelerator or cruise control cables. Replace any cables that have
high effort or excessive wear.
Drive Axle Service
Check readfront axle fluid level and add as needed. Check constant velocity
joints and axle seals for leaking.
Transfer Case (AI/- Wheel Drive) Inspection
Every 12 months or at oil change intervals, check front axle and transfer
case and add lubricant when necessary.
Oil the control lever pivot point and
all exposed control linkage. Check vent hose at transfer case for kinks and
proper installation.
7-39

Downloaded from www.Manualslib.com manuals search engine Braking ......................................................... 4-5
In Emergencies
................................................ 4-7
Break-In, New Vehicle ........................................... 2-13
Bulb Replacement
Center High Mounted Stop Lamp (CHMSL)
........................ 6-39
Composite Headlamps
......................................... 6-35
Front Park Turn Signal Lamps
................................... 6-37
Halogen Bulb
................................................ 6-34
RearLamps
.................................................. 6-38
Replacement Chart
............................................ 6-63
Sealed Beam Headlamps
........................................ 6-33
C
Capacities and Specifications ....................................... 6-61
CarbonMonoxide
........................................... 2-254-30
Care of Your Cassette Tape Player (See “Audio Systems”
)
Cassette Tape Player System (See “Audio Systems’’ )
Catalytic Converter .............................................. 6-40
Center High Mounted Stop Lamp (CHMSL) (See “Bulb Replacement”
)
Certificationmire Label ........................................... 4-23
ChangingaFlatTire
.............................................. 5-21
Child Restraints (See “Safety Belts”)
Circuit Breakers (See “Fuses and Circuit Breakers”)
Cleaning Chemical Paint Spotting
........................................... 6-55
Cigarette LightedAshtrays
......................................... 2-46
Fabric Protection
.............................................. 6-50
Finishcare .................................................. 6-53
Glass
....................................................... 6-52
Insideofvehicle
.............................................. 6-49
Instrumentpanel. Top
.......................................... 6-51
OutsideofVehicle ............................................. 6-53
Outside
of the Windshield. Backglass and Wiper Blades ............... 6-52
Vinyl
....................................................... 6-51
WheelsandTires
.............................................. 6-54
AMRadio
.................................................... 3-6
Audio Systems
with AM/FM Stereo ................................ 3-6
Comfort Controls
................................................. 3-1
Compact Disc (CD) System (See “Audio Systems”)
Console Center Overhead
.............................................. 2-48
Control
of a Vehicle ............................................... 4-4
Coolant (See “Engine”)
Special Problems
.............................................. 6-50
Weatherstrips
................................................. 6-52
Clock, Setting the
Cooling System Capacity
.......................................... 6-62
Crankcase Capacity
.............................................. 6-62
Cruise Control
(Option) ........................................... 2-35
Passing Another Vehicle
........................................ 2-38
OnHills
..................................................... 2-38
ToGetOutOf
................................................ 2-39
ToEraseSpeedMemory
........................................ 2-39
ToIncreaseSpeed
............................................. 2-37
2