ABS CHEVROLET AVEO 2002 Service Owner's Manual

Fig. 21: View of Carpet Drying
Courtesy of GENERAL MOTORS CORP.
If the carpet or the pad or insulator is wet, use the following criteria for drying or for replacing the components.
For a 1-piece carpet assembly bonded to a cotton or a fiber padding, replace the entire assembly.
For a 2-piece carpet assembly with a cotton or a fiber padding, replace the padding only. While the carpet
is out of the vehicle, dry the carpet using the method described below.
For a 1-piece carpet assembly bonded to a foam padding or attached to a synthetic padding, dry the carpet
using the method described below.
For a 2-piece carpet assembly with a synthetic padding, dry the assembly using the method described
below.
Drying Method
1. If you observe puddles of liquid on the carpet face, use a wet vacuum to remove the excess moisture.
2. Blot the face of the carpet with a towel in order to absorb as much moisture as possible.
3. Point a fan at the affected area and air dry the carpet.
CARPET REPLACEMENT

2005 Chevrolet Aveo
2005 ACCESSORIES & EQUIPMENT Interior Trim - Aveo
Microsoft
Friday, July 31, 2009 1:08:27 PMPage 22 © 2005 Mitchell Repair Information Company, LLC.