diagram CHEVROLET BLAZER 1998 2.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine Follow this diagram to store the underbody-mounted
spare.
A. Retainer
B. Valve Stem (Pointec
C. Spare or Flat Tire
D. Spring
E. Wheel Wrench
F. Lower
G. Raise
H. Hoist Arm
i Down)
1. Put the tire on the ground at the rear of the vehicle,
with the valve stem pointed down and
to the rear.
2. Pull the retainer through the wheel.
3. Put the chisel end of the wheel wrench, on an angle,
through the hole in the rear bumper and into the hoist
shaft. Turn the wheel wrench
to the right until the
tire is raised against the underside
of the vehicle.
You will hear
two “clicks” when the tire is secure.
but pull on the tire
to make sure.
5-31

Downloaded from www.Manualslib.com manuals search engine Follow this diagram for the inside-mounted spare. Follow this diagram for the rear-mounted spare.
C7
A. Spare or Flat Tire
B. Retainer
C. Nut
D. Wheel Carrier
E. Hook
A. Wheel Carrier
B. Spare or Flat Tire
C. Wheel Nut and Locking
Nut Cylinder
5-32