brake CHEVROLET COLORADO 2021 Duramax Diesel Supplement
[x] Cancel search | Manufacturer: CHEVROLET, Model Year: 2021, Model line: COLORADO, Model: CHEVROLET COLORADO 2021Pages: 89, PDF Size: 1.9 MB
Page 14 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
Driving and Operating 13
Driving and Operating
Starting and Operating
Starting the Diesel Engine . . . . . . . . . . . . . . 13
Winter Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Engine Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Fuel Operated Heater (FOH) (VanModels Only) . . . . . . . . . . . . . . . . . . . . . . . . . 19
Parking over Things That Burn . . . . . . . . . . 19
Diesel Particulate Filter
Diesel Particulate Filter . . . . . . . . . . . . . . . . . 19
Diesel Exhaust Fluid
Diesel Exhaust Fluid . . . . . . . . . . . . . . . . . . . . 22
Brakes
Exhaust Brake . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Fuel
Top Tier Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Fuel Additives . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Fuel for Diesel Engines . . . . . . . . . . . . . . . . . 25
Biodiesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cold Weather Operation . . . . . . . . . . . . . . . . 27
Water in Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Running Out of Fuel . . . . . . . . . . . . . . . . . . . . 30
Fuel Filter Replacement . . . . . . . . . . . . . . . . . 30
Filling the Tank . . . . . . . . . . . . . . . . . . . . . . . . . 32
Filling a Portable Fuel Container . . . . . . . . 34
Trailer Towing
Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Conversions and Add-Ons
Power Take-Off (PTO) . . . . . . . . . . . . . . . . . . . 37
Starting and Operating
Starting the Diesel Engine
The diesel engine starts differently than a
gasoline engine.
Caution
If the steering wheel is turned until it
reaches the end of its travel, and is held
in that position while starting the vehicle,
damage may occur to the power steering
system and there may be loss of power
steering assist.
Move the shift lever to P (Park) or
N (Neutral). To restart the engine when the
vehicle is already moving, use
N (Neutral) only.
Caution
Do not try to shift to P (Park) if the
vehicle is moving. If you do, you could
damage the transmission. Shift to P (Park)
only when the vehicle is stopped.
Starting the Engine
1. Turn the ignition key to ON/RUN.
Page 16 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
Driving and Operating 15
{Warning
Do not use gasoline or starting aids, such
as ether, in the air intake. They could
damage the engine, which may not be
covered by the vehicle warranty. They
could also cause a fire, which could cause
serious personal injury.
Engine Idle Variations
Under certain conditions the engine idle
speed can vary or be elevated. Change in
idle speed is normal and does not indicate a
problem. Normal conditions that can raise
idle speed are low voltage, DPF
regeneration, air conditioning compressor
loads, and engine warmup. These speeds can
range from approximately 600 to 1000 rpm.
Elevated Idle
The engine has a cold temperature high idle
feature which elevates the engine idle speed
from base idle to 1050 to 1100 rpm for
pickup models or 1200 rpm for van models
when outside temperatures are below 0 °C
(32 °F), and the engine coolant temperature
is below 65 °C (150 °F). This feature enhances
heater performance by raising the engine
coolant temperature faster.To turn this feature on or off on pickup
models, see
Vehicle Personalization (Van
Models) 011 or
Vehicle Personalization (Pickup Models) 011.
On van models, this feature can be turned
on and off using the DIC buttons.
When the engine is started, it will slowly
ramp up to the high idle speed after a delay
of a few seconds up to approximately
two minutes. For this method to work
properly there must be no throttle or brake
pedal faults.
The engine idle speed will return to normal
once the following conditions are met:
.Engine coolant temperature reaches 65 °C
(150 °F).
.Air intake temperature reaches 0 °C
(32 °F).
The high idle speed will be temporarily
interrupted and the engine speed will return
to normal if any of the following conditions
occur:
.The brake pedal is applied.
.The accelerator pedal is pressed.
.The transmission is shifted out of P (Park)
or N (Neutral).
.Vehicle speed is detected. Once these inputs are removed, the engine
idle speed will slowly ramp back up to high
idle after the normal delay, if the conditions
for engine coolant temperature and air
intake temperature are still met.
Fast Idle Control (Vans Only)
The vehicle may have this system which can
be used to increase the engine idle speed.
Fast Idle control will be enabled when the
following conditions are met:
.The parking brake is set.
.The transmission is in P (Park) or
N (Neutral).
.The vehicle speed is about
0 km/h (0 mph).
.The cruise control Set switch is pressed
and released for Preset Fast Idle Speed
(1200 rpm).
Fast Idle control will be disabled when one
or more of the following conditions occur:
.The cruise control Set switch is pressed
and released. See “Cruise Control”in the
owner’s manual.
.The cruise control Cancel switch is
pressed.
.The brake pedal is pressed.
Page 17 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
16 Driving and Operating
.The transmission is shifted out of P (Park)
or N (Neutral).
.The parking brake is released.
.The vehicle speed is not 0 km/h (0 mph).
On vans, when fast idle is active, a FAST
IDLE ON message will be displayed in
the DIC.
Winter Cover
Pickups
Do not use a winter cover on pickups.
Vans
If equipped, the winter cover can be used to
enhance heater performance in extremely
cold conditions below −18 °C (0 °F). The
winter cover installs over the grille and
restricts airflow to the engine compartment.
For vehicles that did not come with a winter
cover, a GM winter cover can be purchased.
See your dealer for additional information.
When the winter cover is in use, the heater,
ventilation, and air conditioning AUTO mode
may not function properly. Use the manual
settings for comfort.
Usage Guidelines
The winter cover should only be used while
operating the vehicle in extremely cold
temperatures or in heavy snow for extended
periods. In these temperatures, the vehicle
does not need a large amount of air to
properly cool the engine. When more
airflow is required to cool the vehicle, the
winter cover should not be used. The
following usage guidelines will allow
adequate airflow for proper radiator and air
cooler performance:
.Do not use the winter cover if towing a
trailer. The vehicle may overheat if the
radiator is covered while towing.
.Do not modify the cover. The winter
cover does not cover some sections of the
front of the vehicle to provide enough
airflow.
.When the winter cover is used, the
outside air temperature display may not
function properly.
.Keep the underside of the winter cover as
clean as possible. Remove monthly or as
necessary and clean away dust and
debris.
.Use only a mild soap to clean. Do not use
harsh soap, strong detergents, or vinyl
protectant/sealant type products as they
may damage the special finish. Allow the
winter cover to dry completely before
reinstalling.
Installation Instructions
When first trying to fit the cover, it may
appear to be undersized but will stretch
during installation to ensure a tight fit. The
initial installation of the cover is best
performed when the winter cover is warm.
1. Open the hood and secure it with the prop rod.
Page 23 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
22 Driving and Operating
Continue to follow the instructions in the
DIC messages. Hold the exhaust brake
switch on the center stack below the climate
controls for more than three seconds, and
then release it, to begin the regeneration
process.
If the EXHAUST BRAKE ON message displays,
then the switch was released too soon.
Press it again to turn off the exhaust brake,
then try again when the DIC message
prompts.
When manual regeneration begins, the
engine speed increases, the engine cooling
fan sound increases, and a DIC message
indicates that cleaning is in progress.
A DIC message will display when cleaning
has completed. The message will remain as
long as cleaning is not necessary. Cleaning
could take up to 30 minutes. Upon
completion, the engine will return to normal
idle, but exhaust components will remain
hot for several minutes. Do not move the
vehicle until the exhaust has had time to
cool. Manual regeneration can be canceled
at any time by pressing the brake pedal or
turning the engine off. Unusual noises may
be heard if regeneration is interrupted.Diesel Exhaust Fluid{
Warning
Avoid getting Diesel Exhaust Fluid (DEF)
on your skin or in your eyes as it could
cause irritation. For more safety,
handling, and storage information, see
the Diesel Exhaust Fluid container label.
Caution
Use only DEF that is GM approved,
or fluid containing the API certified or ISO
22241 label. The use of other fluids could
damage the system, requiring costly
repairs that will not be covered by the
vehicle warranty.
Caution
Do not mix fuel with DEF, and do not put
DEF in the fuel tank. This could lead to
costly repairs that might not be covered
by the vehicle warranty.
Diesel Exhaust Fluid (DEF) is used with diesel
engines to reduce the amount of regulated
emissions produced. Products such as AdBlue are types of DEF, and are approved for use
in the vehicle as long as they have an API
certification label or meet ISO 22241. The
fluid level in the DEF tank must be
maintained for the vehicle to run properly.
DEF is not a fuel additive. DEF should not be
mixed with or added to diesel fuel. DEF
freezes when exposed to temperatures
below
−11 °C (12 °F). For DEF tank capacity
see Capacities and Specifications 082.
It is normal to hear the DEF system purge
fluid back into the tank after the vehicle is
shut off.
Locating Diesel Exhaust Fluid
DEF can be purchased at your dealer.
Additionally, some diesel truck fueling
stations or retailers may have DEF for
purchase. For vehicles with an active OnStar
or connected services plan, OnStar can help
to locate a DEF retailer. See “Customer
Assistance Offices” in the owner’s manual
for phone numbers to assist in contacting a
GM dealer. See Recommended Fluids and
Lubricants 078.
Page 25 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
24 Driving and Operating
limited. For the DEF warning light symbol,
seeDiesel Exhaust Fluid (DEF) Warning Light
0 10.
DEF Quality Poor
Use only DEF that is GM approved, or fluid
containing the API certified or ISO 22241
label.
DEF has an expiration date. If the system
detects poor quality, or contaminated or
diluted DEF, the DIC message will display
along with distance until vehicle speed is
limited.
The speed limitation will occur in a series of
steps with the final speed limitation being
8 km/h (5 mph) along with a flashing
warning light and chimes.
Adding fresh DEF to the system may resolve
the problem after several kilometers/miles
of driving, depending on several factors.
If the DIC message persists, see your dealer
or additional DIC messages may display.
Service DEF System
If a problem occurs with the DEF system, a
DIC message displays along with distance
until vehicle speed is limited. The speed limitation will occur in a series of
steps with the final speed limitation being
8 km/h (5 mph) along with a flashing
warning light and chimes.
In some cases, this message will clear itself,
indicating that the DEF system was able to
correct the condition. If the DIC message
persists, see your dealer or additional DIC
messages may display.
Service Emission System
If a problem occurs with the vehicle
emission system, a DIC message displays
along with distance until vehicle speed is
limited. The speed limitation will occur in a
series of steps with the final speed
limitation of 88 km/h (55 mph) and chimes.
In some cases, this message will clear itself,
indicating that the emission system was
able to correct the condition. If the DIC
message persists, see your dealer or
additional DIC messages may display.
Brakes
Exhaust Brake
The exhaust brake can be used to enhance
the vehicle brake system and reduce brake
lining wear.Downshifts may be automatically selected
to increase engine speed, which increases
the effectiveness of the exhaust brake. The
number of downshifts selected is
determined by the length of time the brakes
are applied and the rate the vehicle is
slowing. The system delivers the correct
amount of braking to assist in vehicle
control. The heavier the vehicle load, the
more active the engine exhaust brake will
be. Use of the exhaust brake will help
maintain vehicle speed when used with
cruise control. See
“Cruise Control”in the
owner’s manual.
Automatic downshifts will not occur if the
vehicle is in Range Selection Mode. See
“Manual Mode” in the owner’s manual.
The exhaust brake only activates when the
transmission torque converter is locked. This
can vary based on vehicle speed, gear,
and load.
To activate the system, press the switch on
the center stack.
Page 26 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
Driving and Operating 25
Pickups
Vans
The exhaust brake is activated when Tow/
Haul Mode is activated. See “Tow/Haul
Mode” in the owner’s manual. A light comes on in the instrument cluster
when the exhaust brake and Tow/Haul are
activated. The switch must be pressed at
each vehicle start for the system to be
active.
Fuel
Top Tier Fuel
GM recommends the use of TOP TIER Diesel
Fuel to keep the engine clean, reduce engine
deposits, and maintain optimal vehicle
performance. Look for the TOP TIER Logo or
see www.toptiergas.com for a list of TOP
TIER Diesel Fuel marketers and applicable
countries.
Fuel Additives
TOP TIER Detergent Diesel is highly
recommended for use with your vehicle.
If your area does not have TOP TIER
Detergent Diesel, GM recommends the use
of ACDelco Diesel Fuel Conditioner. This will
help maintain optimal engine performance.
GM does not recommend other aftermarket
diesel additives.
If low-quality diesel is used for refueling,
GM recommends adding ACDelco Fuel
System Treatment Plus-Diesel to help clean
engine deposits. This is available at your GM
dealer.
Fuel for Diesel Engines
The selection of a high-quality fuel is
important for maintaining optimum vehicle
performance. Diesel fuel should meet or
exceed the minimum requirements in the
most current versions of the local fuel
standards.
Do not use fuel with more than 15 ppm
sulfur, commonly referred to as Ultra Low
Sulfur Fuel.
Do not use a diesel blend containing more
than 20% biodiesel by volume.
Page 30 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
Driving and Operating 29
Caution (Continued)
refuel, water was pumped into the fuel
tank. Turn off the engine and drain the
water immediately.
Removing Water from the Fuel Filter
To drain water:1. Turn the engine off and apply the parking brake.
Van
Pickup
2. Place a container under the filter drain valve. The filter drain valve is on the
bottom of the fuel filter. The filter drain
valve is under the vehicle on the driver
side, inside the frame rail.
3. For van models, open the drain valve by turning it counterclockwise. Allow the
filter to drain until all of the water has
been removed. Close the valve.
For pickup models, open the fuel filter
cap by turning it two to three turns.
Allow the filter to drain until all of the
water has been removed. Close the cap
hand tight. 4. Properly dispose of the water
contaminated fuel.
5. Start the engine and let it run for a few minutes. During the draining process, air
may have entered the fuel system. If the
engine stalls, the fuel system may need
to be primed. See “Fuel Priming”
following.
Fuel Priming
For the fuel system to work properly, the
fuel lines must be full of fuel. If air gets in,
the fuel lines need to be primed before
operating the vehicle and the Fuel Operated
Heater (FOH).
If air is present, the following may have
happened:
.The vehicle ran out of fuel.
.The fuel filter was removed.
.The fuel lines were removed or
disconnected.
.The fuel filter water drain valve was
opened while the engine was running.
.The FOH pump and FOH fuel lines were
removed or disconnected.
Page 31 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
30 Driving and Operating
The system is not harmed by air in the fuel
lines; however, the engine and/or the FOH
may not start until the fuel system is
primed and the air is removed.
Priming the Fuel System
There is an electric priming pump that will
bring fuel to the engine and eliminate air in
the fuel lines. To prime the engine:1. Correct any condition that caused the loss of prime.
2. Turn the ignition on for 30 seconds. Do not start the engine. The fuel pump will
start priming.
3. Turn the ignition off, then back to start, and crank the engine for 15 seconds.
4. If the engine does not start, repeat Steps 2 and 3 until the engine starts.
If the engine does not start after
repeating Steps 2 and 3 three times, turn
the ignition key off for 60 seconds.
5. Repeat the above steps until the engine starts.
6. If the engine starts, but does not run smoothly, increase the engine speed
slightly. 7. If the engine starts and runs but stalls
again, turn the ignition off for
60 seconds.
8. When the engine starts, let it idle for a few minutes and check the filter for any
leaks.
To Prime the Fuel Operated Heater (FOH)
Fuel Lines (Van Models)
See your dealer or qualified technician if the
FOH fuel lines need to be primed.
Running Out of Fuel
If the engine has stalled due to running out
of fuel, try to restart it: 1. If parked on a level surface, add at least 3.8 L (1 gal) of fuel. Up to 18.9 L (5 gal)
may be needed if parked on a slope.
2. Follow the vehicle fuel system priming procedure earlier in this section to
re-prime the system and restart the
engine.
If the check engine light comes on due to
running out of fuel, it may take a few drive
cycles to clear.
On van models only, the Fuel Operated
Heater (FOH) stops automatically when the
fuel tank volume is less than or equal to 10% of the total tank. The FOH fuel lines
will not need to be primed if the vehicle
runs out of fuel.
Fuel Filter Replacement
Van Models
{Warning
Diesel fuel is flammable. It could start a
fire if something ignites it, and people
could be burned. Do not let it get on hot
engine parts, and keep matches or other
ignition sources away.
The fuel filter is on the driver side, inside
the frame rail.
To replace the fuel filter: 1. Drain any water from the filter. See “Removing Water from the Fuel Filter” in
Water in Fuel 027.
Keep the engine off until the procedure
is completed.
2. Apply the parking brake.
Page 32 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
Driving and Operating 31
3. Remove the filter element cap by turningit counterclockwise.
4. Remove the filter element. If there is any dirt on the filter sealing surface, clean
it off.
5. Install the new filter element and o-ring.
6. Reinstall and tighten the filter cap to the housing.
7. Use the fuel filter priming procedure to prime the fuel filter. See “Fuel Priming”
in Water in Fuel 027.
8. Start the engine and let it idle for five minutes. Check the fuel filter and air
bleed valve for leaks.
9. Reset the fuel filter monitor. See Driver
Information Center (DIC) 010. If the van Fuel Operated Heater (FOH) (if
equipped) is not working, the FOH line
requires priming. See your dealer for service.
See
Fuel Operated Heater (FOH) (Van Models
Only) 019.
Pickup Models
{Warning
Diesel fuel is flammable. It could start a
fire if something ignites it, and people
could be burned. Do not let it get on hot
engine parts, and keep matches or other
ignition sources away.
The fuel filter is on the driver side, inside
the frame rail in front of the fuel tank. 1. Drain any water from the filter. See
“Removing Water from the Fuel Filter” in
Water in Fuel 027.
Keep the engine off until the procedure
is completed.
2. Apply the parking brake.
3. There are two caps under the filter. Clean the fuel filter area before removing
these two filter caps.
Caution
Failure to cover the fuel filter with a
clean cloth to keep out debris when
replacing may cause dirt to get into the
engine. This could cause engine damage.
Keep the fuel filter covered with a clean
cloth when replacing.
Page 35 of 89
Chevrolet/GMC 2.8L Duramax Diesel Engine Supplement (GMNA-Localizing-
U.S./Canada-14465442) - 2021 - CRC - 2/3/20
34 Driving and Operating
Filling a Portable Fuel Container
{Warning
Never fill a portable fuel container while
it is in the vehicle. Static electricity
discharge from the container can ignite
the fuel vapor. You or others could be
badly burned and the vehicle could be
damaged. To help avoid injury to you
and others:
.Dispense fuel only into approved
containers.
.Do not fill a container while it is
inside a vehicle, in a vehicle's trunk, in
a pickup bed, or on any surface other
than the ground.
.Bring the fill nozzle in contact with
the inside of the fill opening before
operating the nozzle. Maintain contact
until filling is complete.(Continued)
Warning (Continued)
.Keep sparks, flames, and smoking
materials away from fuel.
.Avoid using electronic devices while
pumping fuel.
Trailer Towing
When towing at high elevation on steep
uphill grades, consider the following:
Engine coolant at higher elevation will boil
at a lower temperature than at or near sea
level. If the engine is turned off immediately
after towing at high elevation on steep
uphill grades, the vehicle may show signs
similar to engine overheating. To avoid this,
let the engine run while parked (preferably
on level ground) with the transmission in
P (Park) and the parking brake applied for at
least five minutes before turning the engine
off. If the overheat warning comes on, see
Engine Overheating062. Use the following chart to determine the
maximum the trailer can weigh, based upon
your vehicle model and options.
All axles of the trailer must be equipped
with brakes adequate for the intended use.
Trailer braking equipment conforming to
Canadian Standards Association (CSA)
requirement CAN3-D313, or its equivalent, is
recommended.