buttons Citroen BERLINGO 2008.5 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: BERLINGO, Model: Citroen BERLINGO 2008.5 2.GPages: 153, PDF Size: 3.11 MB
Page 12 of 153
16
Accesses
Good practice
Take care not to allow the remote
control to come into contact with
grease, dust, rain or a damp
environment.
A heavy object attached to the key
(keyring, ...) weighing on the shaft of
the key in the switch, may cause a
malfunction.
REMOTE CONTROL
Programming the remote
control
Following changing of the remote
control battery or disconnection of the
vehicle battery, the remote control may
have to be reprogrammed.
Wait at least one minute before using
the remote control.
Insert the key in the ignition switch with
the buttons (padlocks) of the remote
control facing you.
Switch on the ignition.
Press the locking padlock for at least
fi v e s e c o n d s w i t h i n t h e n e x t t e n
seconds.
Switch off the ignition.
Wait at least one minute before using
the remote control.
The remote control is now working
again.
Use only identical batteries or
batteries of an equivalent type to those
recommended by CITROËN dealers.
Do not discard the remote control
batteries, they contain metals which
are harmful to the environment.
Deposit them at a CITROËN
dealership, or at any other approved
collection point.
Folding/unfolding the key
Changing the battery
Battery ref.: CR1620/3 volts.
T h e i n f o r m a t i o n " b a t t e r y fl a t " i s g i v e n
by an audible signal, accompanied by
a message on the display.
To replace the battery, unclip the
casing using a coin at the ring.
If the remote control does not work
after the battery has been changed,
reprogramme the remote control.
There is a risk of damage if the
replacement battery does not conform. Press this button to release
the key from its housing.
To fold the key, press this
chromed button then fold
the key into the housing.
If you do not press the button, the
mechanism may be damaged.
Page 82 of 153
82
1 1
2 2
33
4 4
MENU
2 2
4 4
33
1 1
AUDIO
Press the SOURCE button several times in succession and select the radio.
Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM.
B r i e fl y p r e s s o n e o f t h e b u t t o n s t o carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST REFRESH button to display the list of stations received l o c a l l y ( 3 0 s t a t i o n s m a x i m u m ) . To update this list, press for more than two seconds.
Select ACTIVATE FREQUENCY F O L L O W I N G ( R D S ) t h e n p r e s s O K . RDS appears on the display.
Select the FM WAVEBAND PREFERENCES function then press OK.
Select AUDIO FUNCTIONS then press OK.
Press the MENU button.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)
T h e e x t e r n a l e n v i r o n m e n t ( h i l l s , b u i l d i n g s , t u n n e l s , b a s e m e n t c a r p a r k s ) m a y b l o c k r e c e p t i o n , i n c l u d i n g i n R D S m o d e . T h i s i s a n o r m a l e f f e c t o f t h e w a y i n w h i c h r a d i o w a v e s are transmitted and does not indicate any failure of the audio equipment.
RDS
T h e R D S , i f d i s p l a y e d , e n a b l e s y o u t o c o n t i n u e l i s t e n i n g t o t h e s a m e s t a t i o n b y m e a n s o f f r e q u e n c y f o l l o w i n g . H o w e v e r , i n c e r t a i n c o n d i t i o n s , t h i s R D S s t a t i o n i s n o t f o l l o w e d t h r o u g h o u t t h e c o u n t r y as radio stations do not cover 100 % of the territory. This explains t h e l o s s o f r e c e p t i o n o f t h e s t a t i o n d u r i n g a j o u r n e y .
OK
OK
OK
RADIO
SELECTING A STATION
Page 83 of 153
1 1
2 2
83
Insert circular compact discs only. S o m e a n t i - p i r a t i n g s y s t e m s , o n o r i g i n a l d i s c s o r C D s c o p i e d u s i n g a p e r s o n a l r e c o r d e r , m a y c a u s e f a u l t s w h i c h a r e n o r e fl e c t i o n o n t h e q u a l i t y o f t h e o r i g i n a l player. W i t h o u t p r e s s i n g t h e E J E C T b u t t o n , i n s e r t a C D i n t h e p l a y e r , p l a y b e g i n s a u t o m a t i c a l l y .
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
Press one of the buttons to select a track on the CD. Press the LIST REFRESH button to display the list of tracks on the CD.
CD
PLAYING A CD
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 A udio Layer 3, i s a n a u d i o c o m p r e s s i o n s t a n d a r d w h i c h p e r m i t s t h e r e c o r d i n g o f s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c . T h e p l a y i n g a n d d i s p l a y i n g o f a n M P 3 c o m p i l a t i o n m a y d e p e n d o n t h e r e c o r d i n g p r o g r a m m e a n d / o r t h e p a r a m e t e r s u s e d .
I n o r d e r t o b e a b l e t o p l a y a r e c o r d e d C D R o r C D R W , w h e n r e c o r d i n g s e l e c t s t a n d a r d s I S O 9 6 6 0 l e v e l 1 . 2 o r J o l i e t . If the disc is recorded in another format, it may not be played correctly. I t i s r e c o m m e n d e d t h a t t h e s a m e r e c o r d i n g s t a n d a r d i s a l w a y s u s e d for an individual disc, with as low a speed as possible for optimum sound quality. In the particular case of a multi-session CD, the Joliet standard is recommended.
T h e a u d i o e q u i p m e n t w i l l o n l y p l a y fi l e s w i t h t h e e x t e n s i o n " . m p 3 " . N o o t h e r t y p e o f fi l e ( . w m a , . m p 4 . . . ) c a n b e p l a y e d .
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s w i t h o u t u s i n g s p e c i a l c h a r a c t e r s ( e . g . : " " ? ; ù ) t o a v o i d a n y p l a y i n g o r d i s p l a y i n g problems.
MP3 CD
INFORMATION AND ADVICE
Page 84 of 153
84
1 1
2 2
1 1
2 2
33
Insert an MP3 compilation in the player. The audio equipment searches for all of the music t r a c k s , w h i c h m a y t a k e a n y t h i n g b e t w e e n a f e w seconds and several tens of seconds, before play b e g i n s .
O n a s i n g l e d i s c , t h e C D p l a y e r c a n r e a d u p t o 2 5 5 M P 3 fi l e s s p r e a d over 8 directory levels. However, it is advisable to keep to a limit of two levels to reduce the access time before the CD is played.
To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD.
Press one of the buttons to select a track on the CD. Press the LIST REFRESH button to display the list of directories of the MP3 compilation.
CD
PLAYING AN MP3 COMPILATION *
C D C H A N G E R - n o t M P 3 c o m p a t i b l e
I n s e r t t h e C D s i n t h e c h a n g e r o n e b y one. Press the SOURCE button several times in succession and select CD CHANGER.
Press one of the buttons on the numeric keypad to select the c o r r e s p o n d i n g C D . Press and hold one of the CD c h a n g e r b u t t o n s t o e j e c t t h e c o r r e s p o n d i n g C D .
Press one of the buttons to select a track on the CD. Press and hold one of the buttons for fast forwards or backwards play.
P l a y i n g a C D
* A c c o r d i n g t o l e v e l o f fi n i s h .
Page 88 of 153
88
0 6
RADIO: selection of the next stored station. CD CHANGER: selection of the next CD. Selection of the next item on a menu.
RADIO: selection of the previous stored station. CD CHANGER: selection of the previous CD. Selection of the previous item on a menu.
R A D I O : a u t o m a t i c s e a r c h f o r a h i g h e r f r e q u e n c y . CD/CD CHANGER/MP3: selection of the next track. CD/CD CHANGER: continuous press: fast forwards play. Selection of the previous item.
RADIO: automatic search for a lower frequency. CD/CD CHANGER/MP3: selection of the previous track. CD/CD CHANGER: continuous press: fast backwards play. Selection of the next item.
Volume increase.
Volume decrease.
CONTROL SHORT-CUTS
M u t e : b y p r e s s i n g the volume increase and decrease buttons simultaneously.
The sound is restored by p r e s s i n g o n e o f t h e t w o volume buttons.
- C h a n g e o f s o u n d s o u r c e . - C o n fi r m a t i o n o f a s e l e c t i o n . - P i c k u p / H a n g u p t h e t e l e p h o n e . - Press for more than 2 seconds: access to the telephone menu.
STEERING WHEEL CONTROLS
Page 93 of 153
93 93
44
CD changer
CD CHANGER - not MP3
compatible
Playing a CD
Press one of the buttons on the
numeric keypad to select the
corresponding CD.
Press and hold one of the CD changer
buttons to eject the corresponding CD. Press one of the buttons to select a
track on the CD.
Press and hold one of the buttons for
fast forwards or backwards play.
Insert the CDs in the changer
one by one.
Press the SOURCE button several
times in succession and select CD
CHANGER.
Using the auxiliary input (AUX)
Jack/RCA cable not supplied
The auxiliary input permits the
connection of portable equipment
(MP3 player, ...). It is activated by default.
Connect the portable equipment
(MP3 player, …) to the audio sockets
(white and red RCA type) located in
the glove box using a JACK/RCA audio
cable.
Press the SOURCE button several
times in succession and select AUX.