radio Citroen BERLINGO FIRST 2011.5 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2011.5, Model line: BERLINGO FIRST, Model: Citroen BERLINGO FIRST 2011.5 1.GPages: 128, PDF Size: 3.68 MB
Page 99 of 128
97 PRACTICAL INFORMATION
-
ACCESSORIES
These accessories and parts, hav-
ing been tested and approved for
reliability and safety, are all adapted
to your vehicle. A wide range of rec-
ommended accessories and original
parts is offered.
The fi tting of electrical equip-
ment or accessories which
are not recommended by
Automobiles CITROËN may
result in the failure of your vehicle's
electronic system. Please note this
specifi c warning. You are advised
to contact a representative of the
Marque to be shown the range of
recommended equipment and ac-
cessories.
Depending on the country in which
the vehicle is sold or operated, it is
compulsory to have a high visibility
safety jacket, warning triangle and
replacement bulbs available in the
vehicle.
Screenwash, interior and exterior
cleaning and maintenance products,
replacement bulbs, ...
Anti-theft alarm, window engraving,
fi rst aid kit, high visibility safety jacket,
rear parking assistance, warning tri-
angle, ...
Audio equipment, hands-free kit,
speakers, CD changer, navigation, ...
Regardless of the audio and telemat-
ic equipment offered on the market,
the technical constraints linked with
the fi tting of equipment of these fami-
lies of products mean that the spe-
cial features of the equipment and
its compatibility with the capacities
of the your vehicle's standard equip-
ment must be taken into account.
Please contact a CITROËN dealer
for information before fi tting such
equipment.
Front mud fl aps, rear mud fl aps,
15/17 inch alloy wheels, wheelarch
trim, leather steering wheel, ...
Range of professional equipment
Load retainers (all models).
Loading roller.
Towbar, towbar harness: trailer towbar
which must be fi tted by the CITROËN
network.
Separation partitions and grilles,
smooth, non-slip wooden protective
fl oor.
Protective grilles.
Installation of
radiocommunication transmitters
Before installing accessory radio-
communication transmitters with an
external aerial on your vehicle, you
are advised to contact a representa-
tive of the CITROËN marque.
Range of comfort, leisure and
maintenance equipment
Front seat covers compatible with
airbags, bench, rubber mats, carpet
mats, snow chains, blind, tailgate
bicycle carrier, roof bars (max load
120 kg), transverse roof bars (max
load 100 kg), ...
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat and its fi xings
are positioned correctly,
-
never fi t one mat on top of another.
For any work on your vehicle,
use a qualifi ed workshop that
has the technical information,
competence and equipment
required, which a CITROËN dealer
is able to provide. The CITROËN Network will inform
you of the specifi cations (frequency
band, maximum output power, aerial
position, specifi c installation condi-
tions) of the transmitters which can be
fi tted, in accordance with the Motor
Vehicle Electromagnetic Compatibility
Directive (2004/104/CE).
Page 112 of 128
AUDIO
11 0 -
RD3 AUDIO SYSTEM
Stalk movement
Function
1
- Press (behind) Increase volume
2
- Press (behind) Decrease volume
1 + 2
- Simultaneous press Sound cut-off (mute); restoring of the sound by pressing any button
3
- Press Automatic search of higher frequencies (radio) - Selection of the next track (CD)
4
- Press Automatic search of lower frequencies (radio) - Selection of the previous track (CD)
5
- Press the end Change of source (radio/CD)
6
- Rotation (clockwise) Selection of next preset station (radio)
7
- Rotation
(anti-clockwise) Selection of previous preset station (radio)
Page 113 of 128
111 AUDIO
-
Button
Function
A
Radio On/Off.
B
-
Decrease volume.
C
+
Increase volume.
D
RDS
RDS function On/Off.
Press for more than 2 seconds: regional following mode On/Off.
E
TA
Traffi c information priority on/off.
Press for more than 2 seconds: PTY function On/Off.
H
Page 114 of 128
AUDIO
11 2 -
GENERAL FUNCTIONS
AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-
sises bass and treble tones. Press
button I
or J
to switch the function on
or off.
On/Off
With the ignition key
in the accessories or
ignition position, press
button A
to switch the
set on or off.
The set can oper-
ate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
vehicle. It would not function if fi tted
to another vehicle.
The anti-theft system is automatic
and requires no action on your
part.
ADJUSTING THE VOLUME
Adjusting the bass
Adjusting the treble
When "TREB"
is displayed, press
button I
or J
to vary the setting.
- "TREB -9"
for a minimum treble
setting,
- "TREB 0"
for a normal setting,
- "TREB +9"
for a maximum treble
setting.
Press button H
several
times in succession
to access the bass
(BASS)
, treble (TREB)
,
loudness (LOUD)
,
fader (FAD)
, balance
(BAL)
and automatic
volume correction.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button H
after confi guration of the automatic
volume correction. When "BASS"
is dis-
played, press button I
or J
to vary the set-
ting.
- "BASS -9"
for a
minimum bass set-
ting,
- "BASS 0"
for a
normal setting,
- "BASS +9"
for a maximum bass
setting.
Press button C
to in-
crease the volume, or
button B
to decrease it.
The bass and treble settings
are specifi c to each source.
It is possible to set them dif-
ferently for radio or CD.
Continuous pressure on buttons C
and B
allows a gradual adjustment of
the volume.
Page 115 of 128
11 3 AUDIO
-
RADIO SOURCE
Adjusting the front/rear sound
distribution (Fader)
When "FAD"
is displayed, press but-
ton I
or J
.
Button I
increases the volume in the
front.
Button J
increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL"
is displayed, press but-
ton I
or J
.
Button I
increases the volume on the
right-hand side.
Button J
increases the volume on the
left-hand side.
Automatic volume correction
This function enables the volume to
be automatically adjusted depending
on the level of noise produced by the
speed of the vehicle.
Press buttons I
or J
to switch the
function on or off.
Selecting radio mode
Press button R
.
Radio reception
Your car radio is subject to phenom-
ena which do not affect domestic ra-
dio sets. Both AM (MW/LW) and FM
reception are subject to various forms
of interference. This is no refl ection on
the quality of the equipment, but is due
to the nature of the signals and the way
in which they are transmitted.
On MW/LW, interference may be no-
ticed when passing under high voltage
power lines or bridges, or in tunnels.
On FM, interference may be the result
of increasing distance from the trans-
mitter, defl ection of the signals by ob-
stacles (mountains, hills, buildings,
etc.), or of being in an area which is
not covered by a transmitter.
Selecting a waveband
Briefl y press button R
to select the FM1,
FM2, FMast and AM wavebands.
Page 116 of 128
AUDIO
11 4 -
Briefl y press button L
or N
to search
for the station immediately above or
below. By continuing to press the
button in the direction selected, you
will obtain continuous scrolling of the
frequency.
The scrolling stops at the fi rst sta-
tion found as soon as the button is
released.
If the TA
traffi c information pro-
gramme is selected, only stations
broadcasting this type of programme
are selected.
Searching for a station occurs fi rst in
"LO"
sensitivity (selection of the most
powerful transmitters) during scan-
ning of the waveband, then in "DX"
sensitivity (selection of the weakest
and most distant transmitters).
To make a direct search in "DX"
sen-
sitivity, press button L
or N
twice.
Manual station search
Press the "MAN"
button.
Briefl y press button L
or N
to in-
crease or decrease the frequency
displayed.
By continuing to press the button in
the direction selected, you will obtain
continuous scrolling of the frequency.
The scrolling stops at the fi rst sta-
tion found as soon as the button is
released.
Pressing the "MAN"
button again
returns you to automatic station
search.
Manual presetting of stations
Select the station required.
Press one of the buttons "1"
to "6"
for more than two seconds.
The sound stops then becomes audi-
ble again, confi rming that the station
has been stored in the memory.
Automatic station search
Automatic presetting of FM
stations (autostore)
Press and hold button R
for
more than two seconds.
Your radio automatically presets the
6 stations with the strongest signal in
FM
. These stations are stored in the
FMast waveband.
If it is not possible to fi nd 6 stations,
the remaining preset positions are
empty.
Recalling preset stations
For each waveband, briefl y press
buttons "1"
to "6"
to recall the cor-
responding station.
Page 117 of 128
11 5 AUDIO
-
RDS
Traffi c information programme
Regional mode (REG)
RDS alternative frequencies
The screen indicates the name of the
station selected. The radio continu-
ally searches for the frequency trans-
mitting the station which has the best
reception. Press the "TA"
button
to switch the function
on or off.
Briefl y press the
"RDS"
button to switch
the function on or off.
The multifunction screen will show:
- "RDS"
if the function is selected.
- "(RDS)"
if the function is selected
but not available.
When they are part
of a network, certain
stations broadcast re-
gional programmes in
the various areas they serve. With
regional mode you can keep listen-
ing to the same programme.
Press the "RDS"
button for more
than two seconds to switch the REG
function on or off.
Using the RDS (Radio Data
System) function on FM
Radio Data System allows you to
continue listening to the same station,
whatever the frequency it is using for
the region you are going through. The multifunction screen will show:
- "TA"
if the function is selected,
- "(TA)"
if the function is selected
but not available.
Any traffi c information fl ash will be
given priority, whatever source you
are listening to (radio or CD).
If you wish to interrupt a message,
press the "TA"
button; this switches
the function off.
The volume of traffi c infor-
mation announcements is
independent of the volume
of normal radio listening.
You can adjust it using the volume
button. The setting will be stored
and will be used when the next
messages are broadcast.