Citroen BERLINGO MULTISPACE RHD 2014.5 2.G Owner's Manual

02
10.61
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
StEErInG MOuntEd cOntrOLS
Radio: automatic search for a higher frequency.
CD   /   MP3   /   USB:   selection   of   the   next   track.
CD
  /   USB:   continuous   press:   fast   forwards   play.
Move
  in   the   list. Change
  audio   source.
Confirm
  a   selection.
Call/end
  call   on   the   telephone.
Press
  for   more   than   2   seconds:  
telephone

  main   menu.
Radio:
  automatic   search   for   a   lower  
frequency

.
CD
  /   MP3   /   USB:   selection   of   the  
previous

  track.
CD
  /   USB:   continuous   press:   fast  
reverse.
Move

  in   the   list.
Radio:
 
select
 
the
 
previous/next
 
pre-set
 
station.
USB:

 
select
 
genre
 
/
 
artist
 
/
 
folder
 
from
 
the
 
classification

 
list.
Select
 
the
 
previous/next
 
item
 
in
 
a
 
menu. Volume
  increase.
Volume
  decrease.Mute:
  press   the   volume  
increase and decrease
buttons

  simultaneously.
The sound is restored by
pressing one of the
two
  volume   buttons.

03
10.62
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
MAIn MEnu
AudIO FunctIOnS: radio,  CD,   USB,   options.
Screen c
For a detailed global view of the
menus  available,   refer   to   the  
"Screen

  menu   map"   section.
t

ELEPHO
n
E:
 
Bluetooth hands-free,
pairing,

 
management
 
of

 
a
 
call.
PE
r
SO
n
ALISA
t

IO
n
-
c

O
n
FIG
ur
A
t

IO
n
:
 
vehicle

 
parameters,
 
display

,
 
languages.
tr

IP
c
OMP
ut
E
r
:
 
entering
 
of distances, alerts, status of
functions.
Screen A

04
10.63
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
AudIO
Press the SoURCE button several
times   in   succession   and   select   the  
radio.
Press the B

and
a
ST button to select
a
  waveband:   FM1,   FM2,   FMast,  
AM.
Briefly

  press   one   of   the   buttons   to  
carry

  out   an   automatic   search   of   the  
radio

  stations.
Press one of the buttons to carry out
a
  manual   search   up   /   down   for   radio  
frequencies.
Press the LIST

REFRESH button to
display the list of stations received
locally
  (30   stations   maximum).
To
  update   this   list,   press   for   more  
than

  two   seconds. The
 
external
 
environment
 
(hills,
 
buildings,
 
tunnels,
 
basement
 
car
 
parks, 
...)  
may

  block   reception,   including   in   RDS   mode.  
This
  is   a   normal   effect   of   the  
way

  in   which   radio   waves   are   transmitted   and   does   not   indicate   any   failure  
of

  the   audio   system.
rdSr
adioSelecting a station
Press   the   MENU   button.
Select
a

U d I o FU n CTI on S then
press
  OK.
Select the FM WaVEBand
PREFERENCES  function  then  press  OK.
Select aCTIVaTE R d S then press
OK.   RDS   appears   on   the   screen.
In
 
radio
 
mode,   press   OK   directly   to   activate   /   deactivate   RDS  
mode.
The RDS, if displayed, enables you to continue listening to the same station  by   automatic   retuning   to   alternative   frequencies.   However,   in   certain conditions,

  coverage   of   an   RDS   station   may   not   be   assured   throughout   the
 country

  as   radio   stations   do   not   cover   100   %   of   the   territory.   Under   conditions
 of

  very   weak   reception,   the   system   may   change   to   a   regional   station.

04
10.64
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
AudIO
Insert circular compact discs only.
Some   anti-pirating   systems,   on   original   discs   or   CDs   copied   using   a  
personal

  recorder,   may   cause   faults   which   are   no   reflection   on   the  
quality

  of   the   vehicle's   player.
Without pressing the EJECT button, insert a C
d in the player, play
begins
  automatically.
cd
Playing
a cd
To play a disc which has already been
inserted, press the S o URCE button
several
  times   in   succession   and  
select

  CD.
Press one of the buttons to select a
track
  on   the   CD.
Press
 
the
 
LIST
 
REFRESH   button   to   display   the   list   of   tracks   on  
the
 
CD. Press and hold one of the buttons for
fast
  forwards   or   fast   backwards.
receiving tA messages
Press the Ta button to activate or
deactivate   traffic   messages.
The
 
T

A
 

(Traffic  
Announcement)
  function   gives   priority   to  
T
A
 
alert  
messages.

 
T
o   operate,   this   function   needs   good   reception   of   a  
radio

 
station
  transmitting   this   type   of   message.   When   a   traffic  
report

 
is
 
transmitted,   the   current   audio   source   (Radio,   CD,   ...)   is  
interrupted

 
automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

 
the
 
audio
  source   resumes   at   the   end   of   the   transmission   of   the  
message.

04
10.65
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio  Layer 3,  is
  an   audio   compression   standard   which   permits   the   recording   of  
several

  tens   of   music   files   on   a   single   disc.
In order to be able to play a recorded C
d R or C d RW, when
recording,
  the   ISO   9660   level   1.2   or   Joliet   file   format   is  
recommended.
If

  the   disc   is   recorded   in   another   format,   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   format   is   always   used  
for an individual disc, with as low a speed as possible
(4x

  maximum)   for   optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   format   is  
recommended.
The

  audio   system   will   only   play   files   with   the   extension   ".mp3"   with  
a

  sampling   rate   of   22.05   KHz   or   44.1   KHz.   No   other   type   of   file  
(.wma,

  .mp4,   .m3u...)   can   be   played.
It
  is   advisable   to   restrict   file   names   to   20   characters   without   using  
special

  characters   (e.g.   "   ?   ;   ù)   to   avoid   any   playing   or   displaying  
problems.
MP3 cd
Information
and advice
AudIO
Empty CDs are not recognised and may damage the system.
Insert
 
an
 
MP3
 
compilation
 
in
 
the
 
player.
The
 
audio
 
equipment
 
searches
 
for
 
all
 
of
 
the
 
music
 
tracks,
 
which
 
may

 
take
 
anything
 
between
 
a
 
few
 
seconds
 
and
 
several
 
tens
 
of
 
seconds,

 
before
 
play
 
begins.
MP3 cd
Playing

an MP3 compilation
On a single disc, the CD player can read up to 255 MP3 files spread  over   8   folder   levels.   However,   it   is   advisable   to   keep   to  
a

  limit   of   two   levels   to   reduce   the   access   time   before   the   CD   is  
played.
While

  the   CD   is   being   played,   the   folder   structure   is   not   followed.
All
  of   the   files   are   displayed   on   a   single   level.
To play a disc which has already
been inserted, press the S
o URCE
button
  several   times   in   succession  
and

  select   CD.
Press one of the buttons to select a
folder
  on   the   CD.
Press the LIST REFRESH button to display the list of directories of
the
  MP3   compilation.Press and hold one of the buttons for
fast
  forward   or   backward   play.
Press one of the buttons to select a
track
  on   the   CD.

05
10.66
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
uSB PLAYEr
The system puts together playlists (temporary memory) created over  a   period   which   depends   on   the   capacity   of   the   USB   device.
The
  other   sources   are   available   during   this   time.
The
  playlists   are   updated   each   time   the   ignition   is   switched   off   or  
each

  time   a   USB   memory   stick   is   connected.
When
  connecting   for   the   first   time,   the   classification   suggested  
is

  by   folder.   When   you   reconnect,   the   classification   selected  
previously

  is   retained.Connect
  the   memory   stick   to   the   port,   directly   or  
using

  a   lead.   If   the   audio   equipment   is   switched  
on, the USB source is detected as soon as it
is

  connected.   Play   begins   automatically   after   a  
delay which depends on the capacity of the USB
memory

  stick.
The   file   formats   supported   are   .mp3   (mpeg1  
layer

  3   only)   and   .wma   (standard   9   only,  
128 kbits/sec

  compression).
Certain   playlist   formats   are   supported   (.m3u,   ...)
On   reconnection   of   the   previous   memory   stick  
used,

  play   is   resumed   automatically   with   the   last  
track

  played.
This unit consists of a USB port and an auxiliary
Jack
 
socket*.
 
The

 
audio
 
files
 
are
 
transmitted
 
from

 
a
 
portable
 
device
 
-
 
digital
 
player
 
or
 
a
 
USB
 
memory

 
stick
 
-
 
to
 
your
 
Audio

 
system
 
and
 
heard
 
via

 
the
 
vehicle's
 
speakers.
USB
 
memory
 
stick
 
or
 
Apple® player of
generation
 
5
 
or
 
later:
-
 
Give

 
preference
 
to
 
multimedia   USB   memory  
sticks

 
(in
 
general
 
formatted   FAT
 
32   File  
a
llocation Table),
-

the

a
pple
® player lead is essential,
-
 
navigation

  through   the   file   database   is   also  
possible

 
by   means   of   the   steering   mounted  
controls.
using the uSB BOX
connecting a uSB memory stick
o

ther
a
pple
® players of earlier generations and
players
 
using   the   MTP  protocol*:
-
 
play

 
via
 
Jack-Jack   lead   only   (not   supplied),
-
 
navigation
  through   the   file   database   is   from  
the

 
portable   device. *
  Depending   on   vehicle.

05
10.67
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
using the uSB POrt
Press LIST briefly   to   display   the  previously
  selected   classification.
Navigate
  through   the   list   using   the   left/
right
  and   up/down   buttons.
Confirm
  the   selection   by   pressing   OK. The
  lists   available   are  
Artist,
  Genre   and   Playlist   (as   defined   in   the  
a pple
® player).
Selection   and   Navigation   are   described   in   steps   1   to   4   above.
Do
 
not
  connect   a   hard   disk   or   USB   connection   device   other  
than

 
audio   equipment   to   the   USB   port.  
This
  could   damage   your  
installation.
c

onnecting an Apple
® player via the uSB port
Press one of these buttons to gain
access
 
to
  the   previous   /   next   track   on  
the

 
classification   list   currently   being  
played.
Press and hold one of the buttons for
fast

 
forward   or   backward   play.
Press one of these buttons to
gain
 
access   to   the   previous   /   next  
Genre, Folder

,
a
rtist or Playlist on
the
 
classification   list   currently   being  
played.
Press and hold LIST

to display the
different
 
classifications.
Select
 
by
 
Folder
 
/
 
Artist

 
/
 
Genre
 
/
 
Playlist,
 
press

 
OK
 
to
 
select
 
the
 
classification
 
required,

 
then
 
press
 
OK
 
again
 
to
 
confirm.
-
 
by

 
Folder:
 
all
 
folders
 
containing
 
audio
 
files

 
recognised
 
on
 
the
 
peripheral
 
device.
-

 
by

 
Artist:

 
all
 
of
 
the
 
artist
 
names
 
defined

 
in
 
the
 
ID3
 
T

ags,
 
classified
 
in
 
alphabetical

 
order.
-
 by
 
Genre:
 
all
 
of
 
the
 
genres
 
defined
 
in
 the
 
ID3
 T
ags.
-
 
by

 
Playlist:
 
in
 
accordance
 
with
 
the
 
playlists

 
recorded
 
on
 
the
 
USB
 
device.
uSB PLAYEr

05
10.68
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
The display and control is via the portable device.
First   adjust   the   volume   of   your   portable   device.
Then   adjust   the   volume   of   your   audio  
system.
using the auxiliary input (AuX)
Adjusting the volume of the auxiliary sourceJAcK socket or uSB port (according to vehicle)
uSB PLAYEr
Do not connect a device to both the JACK socket and the USB port
  at   the   same   time.
Connect the portable device (MP3
player…)
  to   the   JACK   socket   or  
to the USB port, using a suitable
cable

  (not   supplied).Press the S
o URCE button several
times
  in   succession   and   select  
AUX.
The auxiliary input, J

a C k or USB, allows the connection of a
portable   device   (MP3   player...).

06
10.69
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
BLuEtOOt H F unct IO n S
For safety reasons and because they require prolonged attention on the part of the driver
, the operations for pairing of the Bluetooth
mobile
  telephone   with   the   Bluetooth   hands-free   system   of   your  
audio

  equipment   must   be   carried   out   with   the   vehicle   stationary  
and

  the   ignition   on.
Press
  the   MENU   button.
A
 

window   is   displayed   with   a   message   that   a   search   is   in   progress.
a
ctivate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).
In
  the   menu,   select:
-
Bluetooth telephone function - a

udio
-
 
Bluetooth
  configuration
-
 
Perform
  a   Bluetooth   searchThe
  services   offered   depend   on   the   network,   the   SIM   card   and   the  
compatibility

  of   the   Bluetooth   equipment   used.
Consult   your   telephone's   manual   and   your   operator   to   find   out   which  
services

  are   available   to   you.
Bluetooth telephoneScreen c
The

 
TELEPHONE
  menu   permits   access   to   the   following   functions  
in

  particular:   Directory*,   Call   list,   Pairing   management.
The
  first   4   telephones   recognised   are   displayed   in   this   window.
A
 

virtual   keypad   is   displayed   in   the
 screen:

  enter   a   code   with   at   least   4   digits.
Confirm
  by   pressing   OK.
A
 

message   that   the   pairing   has   been   successful   appears   in   the  
screen. Select
  the   telephone   to   be   connected   from   the   list.   Only   one  
telephone

  can   be   connected   at   a   time.
A
 

message   is   displayed   in   the   screen   of   the  
telephone

  chosen.  
T
o   accept   the   pairing,   enter   the  
same

  code   on   the   telephone,   then   confirm   with   OK.
The
  automatic   connection   authorised   is   only   active   after   the  
telephone

  has   been   configured.
The directory and the call list can be accessed after the
synchronisation
  period.
(Available according to model and version)
*
  If   your   telephone   is   fully   compatible.
If
  pairing   fails,   the   number   of   attempts   is   not   limited.
Go
  to   www.citroen.co.uk   for   more   information   (compatibility,   more  
help,

  ...).
Pairing a telephone / First connection

06
10.70
Berlingo_2_VP_en_Chap10c_Rd45_ed02_2014
receiving a call
An   incoming   call   is   announced   by   a   ring   and   a   superimposed  
display

  in   the   vehicle's   screen.
Select the YES tab on the display
using
  the   buttons   and   confirm   by  
pressing

  OK.
Press
  this   button   to   accept   the   call. Making a call
From   the   Bluetooth   telephone   function  
Audio
  menu,   select   Manage  
the

  telephone   call   then   Call,   Call   list   or   Directory.
Press
  this   button   for   more   than   two   seconds   for  
access to your directory

, then navigate with the
thumb
  wheel.
o

r
To
  dial   a   number,   use   your   telephone's   keypad,  
with

  the   vehicle   stationary.
BLuEtOOt H F unct IO n S
The system accesses the telephone's contacts directory, depending on
  compatibility,   and   while   the   Bluetooth   connection   with   it   is  
maintained.
With certain telephones connected by Bluetooth you can send a
contact

  to   the   directory   of   the   audio   system.
Contacts
  imported   in   this   way   are   saved   in   a   permanent   directory  
visible

  to   all,   whatever   the   telephone   connected.
The
  menu   for   the   directory   is   not   accessible   if   it   is   empty.