Time Citroen BERLINGO MULTISPACE RHD 2014.5 2.G Workshop Manual

05
10.23
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
configure the filtering and display of tM c messages
TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.
Press the tr AFFI c button to display the
"Traffic information"
  menu.
Select the "Geographic filter" function
and
  confirm. The
  system   offers   a   choice   of:
-
" r etain all the messages",
or
-
" r etain the messages"
●
 
"
Around the vehicle",
  (confirm  
the

  mileage   to   modify   and   select  
the distance),
●

 
"
On the route".
Confirm
  "OK" to save the
modifications.
We
  recommend:
-
 
a
  filter   on   the   route   and
-
 
a
  filter   around   the   vehicle   of:
-
 
12
  miles   (20   km)   in   urban   areas,
-
 
30
  miles   (50   km)   on   motorways.
trAFFIc InFOrMAtIO n

05
10.24
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
Principal tM c symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
n

arrow carriageway
Road closed
Wind
Slippery surface
Demonstration Fog
a

ccident
d

anger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
receiving tA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

r A d IO   to   display   the   menu.
Select "Service announcements" then
confirm.
a

ctivate or deactivate " t A"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.
trAFFIc InFOrMAtIO n

06
10.27
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
uSInG tHE tELEPHOnE
Select "connect" and confirm.
The   system   offers   to   connect   the  
telephone:
-


in "
Hands-free mode" (telephone
only),
-

in "
Audio"   mode   (streaming:   playing  
music

  files   on   the   telephone),
-

or "
All" (for selection of both
modes).
Select "OK"
  and   confirm. Then
  accept   automatic   connection   on   the   telephone   to   allow   the  
telephone

  to   reconnect   automatically   every   time   the   vehicle   is  
started.
The

 
ability   of   the   system   to   connect   in   only   one   mode   depends   on  
the

 
telephone.  
The
  two   modes   may   both   connect   by   default.
The "Hands-free mode" should be used in preference if
"Streaming"
  is   not   desired.
The
 
services   available   depend   on   the   network,   the   SIM   card   and   the   compatibility   of   the   Bluetooth   telephone   used.   Check   the   telephone  
manual

 
and   with   your   network   provider   for   details   of   the   services   available   to   you.
Depending   on   the   type   of   telephone,   the   system   will   ask   you   to  
accept

  or   not   the   transfer   of   your   contacts.
o

n return to the vehicle,the last telephone connected
automatically
  reconnects,   within   around   30   seconds   after  
switching

  on   the   ignition   (Bluetooth   activated   and   visible).
To
  modify   the   automatic   connection   mode,   remove   the   pairing  
and

  pair   the   telephone   again   with   the   desired   mode.
Enter
  a   minimum   4   figure   code   in   the   telephone  
and

  confirm.
Enter   the   same   code   in   the   system,  
select "

OK"   and   confirm.
Select
  the   name   of   the   desired  
peripheral

  from   the   list   of   devices  
detected

  then   confirm.

06
10.31
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
uSInG tHE tELEPHOnE
calling a recently entered numberPress t EL, select " c all list" and
confirm,
Select
  the   desired   number   and   confirm.
To erase the calls log, press PHO
n E twice, select "Phone
functions"
  and   confirm   then   select   " d elete calls log"   and   confirm.
Ending a call
Press PHOnE then select "OK" to end
the   call.
Or
  make   a   long   press   on  t EL at the
steering
  mounted   controls.
Or
  make   two   short   presses   on  t EL at
the
  steering   mounted   controls.
o

r press the MO d E   button,   as   many  
times

  as   necessary,   until   the   telephone  
screen

  is   displayed.
Press PHO
n
E
 
to
 
display
 
the
 
calls
 
log.
or
Press "OK" to display the contextual
menu
  then   select   "Hang up" and
confirm.
It
 
is
 
always
 
possible
 
to
 
start
 
a
 
call
 
directly
 
from
 
the
 
telephone;
 
park
 
the

 
vehicle
 
as
 
a
 
safety
 
measure.

06
10.33
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
Options during a call*
during a call, press the MO d E button
several   times   to   select   display   of   the  
telephone screen, then press "OK

" to
open
  the   contextual   menu.
Select "Private mode"
  and   confirm   to  
take

  the   call   on   the   handset.
o

r select "Hands-free mode" and
confirm
  to   take   the   call   via   the   vehicle's  
speakers.
Select "

Put call on hold "
  and   confirm   to  
put

  the   current   call   on   hold.
o

r select " r esume the call" and
confirm
  to   resume   the   call   on   hold. Select "
dt MF ring tones
" to use the
numerical   keypad,   so   as   to   navigate  through
  the   menu   of   an   interactive   vocal  
server

.
Select "Hang up"
  to   end   the   call.
*
  Depending   on   the   compatibility   of   the   phone   and   your   service   plan.
it is possible to hold a 3-way conference
call
  by   making   2   calls   in   succession*.  
Select "

c onference mode call" in the
contextual
  menu   accessible   using   this  
button.
Or

  make   a   short   press   on   this   button.
uSInG tHE tELEPHOnE

08
10.39
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
cd, MP3 cd / uSB player
The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg
  and   .mp3"   file   extensions   and   with   a   bit   rate   of   between   32   Kbps  
and

  320   Kbps.
It
  also   supports   VBR   (Variable   Bit   Rate)   mode.
No
  other   type   of   file   (.mp4,   .m3u...)   can   be   played.
WMA
 

files   must   be   of   the   standard   wma   9   type.
The
  sampling   rates   supported   are   greater   than   32   KHz.
It
  is   advisable   to   restrict   file   names   to   20   characters,   without   using   of  
special

  characters   (e.g.:   "   "   ?   ;   ù)   to   avoid   any   playing   and   displaying  
problems.
In order to be able to play a recorded C

d R or C d RW, when recording
it
  is   preferable   to   select   the   ISO   9660   level   1,   2   or   Joliet   standard.
If
  the   disc   is   recorded   in   another   format   (udf, ...),   it   may   not   be   played  
correctly

.
It
  is   recommended   that   the   same   recording   standard   is   always   used  
for

  an   individual   disc,   with   as   low   a   speed   as   possible   (4x   maximum)  
for

  optimum   sound   quality.
In
  the   particular   case   of   a   multi-session   CD,   the   Joliet   standard   is  
recommended.Information and advice
The
  system   supports   USB   mass   storage   or   iPod  
devices

  via   the   USB   port   (suitable   cable   not   supplied).
If
  a   partitioned   USB   memory   key   is   connected   to   the  
system,

  only   the   first   partition   is   recognised.
Control of the peripheral device is with the audio
system
  controls.
The
  number   of   tracks   is   limited   to   2000   maximum,  
999 tracks

  per   folder.
If
  the   current   consumption   at   the   USB   port   exceeds  
500

  mA,   the   system   goes   into   protection   mode   and  
deactivates

  the   port.
Other
  peripherals,   not   recognised   on   connection,   must  
be

  connected   to   the   auxiliary   socket   using   a   Jack   cable  
(not

  supplied).
Give
  preference   to   multimedia   USB   memory   sticks   (in   general  
formatted

  FAT
 
32   File  
Allocation
 
T
able).
The
  system   does   not   support   the   operation   of   an  
Apple® player and a
USB
 
memory
 
stick
 
connected
 
at
 
the
 
same
 
time.
It
 
is
 
recommended
 
that
 
official
 
Apple® USB cables are used to ensure
correct
 
operation.
MuSIc MEdIA PLAYE r S

08
10.40
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
Insert the Cd in the player, insert the USB
memory   stick   in   the   USB   player   or   connect   the  
USB peripheral to the USB port using a suitable
cable

  (not   supplied).
The
  system   builds   playlists   (in   temporary  
memory),

  an   operation   which   can   take   from  
a

  few   seconds   to   several   minutes   at   the   first  
connection.
Reduce

  the   number   of   non-music   files   and   the  
number

  of   folders   to   reduce   the   waiting   time.
The
  playlists   are   updated   every   time   the   ignition  
is

  switched   off   or   connection   of   a   USB   memory  
stick.

  However,   the   system   memorises   these  
lists

  and   if   they   are   not   modified,   the   loading  
time

  will   be   shorter.
Play
  starts   automatically   after   a   period   which  
depends

  on   the   capacity   of   the   USB   memory  
stick. Selection of source
The
SO urc E   button   on   the   steering   mounted   controls   allows   a  direct
  change   to   the   next   media   source.
" cd / cd MP3"
"
u SB, iPod"
"A
u X"
"S
tr EAMI n G"
"
r A d IO"
Press M
u SI c to display the "ME d IA"
menu.
Select "Following media source " and
confirm.
Repeat
  the   operation   as   many   times   as   necessary   to   obtain   the  
desired

  media   source   (except   for   radio   which   is   accessible   either  
with

SO urc E or r A d IO).
Sources
MuSIc MEdIA
PLAYE r S

10
10.46
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
cOnFIGurAtIO n
Setting the date and time
Select the setting to adjust.
Confirm   by   pressing  
OK
,   then   adjust  
the

  setting   and   confirm   again   to   save  
the

  modification.
Press SE
tu
P to display the
"Configuration "
 
menu.
Adjust  the   settings   one   by   one.
Then select "OK" on the screen and
confirm
  to   save   the   settings.
Select "Synchronize the minutes with GPS
" so that setting the
minutes
 
is
 
done   automatically   by   satellite   reception.
Select "Display configuration " and
confirm.
Select "Set date and time" and
confirm.

11
10.47
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
trIP cOMP ut E r
trip computer
Press the ModE button several
times   in   succession   until   the   trip  
computer

  is   displayed.
r

ange: displays the distance which can travelled with the
remaining
  fuel   detected   in   the   tank,   basd   on   the   average  
consumption

  over   the   last   few   miles   (kilometres).
This
  displayed   value   may   vary   significantly   following   a   change   in  
the

  vehicle   speed   or   the   relief   of   the   route.
When
  the   range   falls   below   20   miles   (30   km),   dashes   are  
displayed.

 
After
  filling   with   at   least   10   litres   of   fuel,   the   range   is  
recalculated

  and   is   displayed   when   it   exceeds   60   miles   (100   km).
If, whilst driving, dashes are displayed continuously in place of the
digits,
  contact   a   CITROËN   dealer.
c

urrent fuel consumption:

only calculated and displayed above
20
  mph   (30   km/h).
Average fuel consumption:
 

this   is   the   average   fuel   consumption  
since

  the   last   trip   computer   zero   reset.
d

istance travelled:
 
calculated   since   the   last   trip   computer   zero  
reset.
d

istance remaining to the destination:

calculated with reference
to
  the   final   destination,   entered   by   the   user.   If   guidance   is  
activated,

  the   navigation   system   calculates   it   as   a   current   value.
Average speed: this is the average speed calculated since the last
trip
  computer   zero   reset   (ignition   on).
Each
 
press
 
of   the   button   at   the   end   of   the   wiper   stalk   displays   the  
dif

ferent
 
trip
 
computer   information   in   succession,   according   to   the  
screen.
A few definitions
- The  "vehicle"   tab:
The range, the current fuel
consumption

  and   the   distance  
remaining.
-

 
The
  "1"   (trip   1)   tab   with:
The average speed, the average
fuel

  consumption   and   the  
distance travelled calculated
over

  route   "1".
-
 
The
  "2"   (trip   2)   tab   with   the   same  
functions

  for   a   second   route.

12
10.48
Berlingo_2_VP_en_Chap10b_RT6-2-8_ed02-2014
ScrEEn MEnu MAP(S)
"navigation - guidance"
ME nu
Enter an address
Select destination
directory
GPS coordinates
Journey leg and route
Add a stage Enter an address
d

irectory Previous destinations
Order/delete journey legs
d
ivert route
c

hosen destination
Guidance options
Define calculation criteria
d

elete last destinations
Map management
Map orientation
MAIn FunctIOn
Option A1
o
ption a 11
Option A
Option B...
Map details
Move the map
Mapping and updating
d

escription of risk areas database
Stop / restore guidance
1
2
3
1
3
3
2
2
2
2
1
3
1
1
2
2
2
2
2
2
2
2
2
2
1
1
Set parameters for risk areas2
Fastest route2
Shortest route
d
istance/ t
ime
W

ith tolls2
2
2
With Ferry2
Traffic info2
Set speech synthesisFastest route
Shortest route
3
3
2
Distance/Time
With tolls3
3
With Ferry
Traffic
  info3
3
3
3
3
north direction
V ehicle direction
Perspective view