ignition Citroen BERLINGO MULTISPACE RHD 2017 2.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2017, Model line: BERLINGO MULTISPACE RHD, Model: Citroen BERLINGO MULTISPACE RHD 2017 2.GPages: 292, PDF Size: 10.19 MB
Page 112 of 292

11 0
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
Adjusting electric door mirrors
- Move the control to the right or to
the left to select the corresponding
mirror.
-
Move the control in all four
directions
to adjust.
-
Return the control to the central
position.
MIRRORS
Heated mirrors
Adjusting manual door mirrors
Forced folding
If the mirror casing has come out of
its initial location, with the vehicle
stationary reposition the mirror casing
manually or use the electric folding
control.Press the heated rear screen
button.
Move the lever in all four directions to
adjust.
When
the
vehicle
is
parked,
the
door
mirrors
can
be
folded
back
manually.
The mirrors are not equipped with
automatic
heating.
Electric folding / unfolding
The mirrors can be folded or unfolded
electrically from the inside, with the
vehicle
parked and the ignition on:
-
Place the control in the central
position.
-
T
urn the control downwards. The
mirrors that have electric folding/
unfolding can be heated.
Mirrors and windows
Page 114 of 292

11 2
Berlingo2VP_en_Chap04_Ergonomie_ed02-2016Berlingo2VP_en_Chap04_Ergonomie_ed02-2016
ELECTRIC WINDOWS
Lower the window fully, then raise it, it
will rise in steps of a few centimetres
each time the control is pressed.
Repeat the operation until the window
is
fully closed.
Continue to press the control for at
least one second after the window
closed
position has been reached.
The safety anti-pinch does not operate
during
these operations.
Safety anti-pinch
When the window rises and meets an
obstacle, it stops and partially lowers.
Manual mode
This mode is available
depending on equipment; it is
identified
by this symbol on the
control
in question.
Good practice
If the electric windows meet an
obstacle during operation, you must
reverse the movement of the window.
T
o
do
this,
press
the
control
concerned.
When the driver operates the
passenger electric window controls,
they must ensure that no one is
preventing correct closing of the
windows.
The driver must ensure that the
passengers use the electric windows
correctly
.
Be aware of children when operating
the
windows.
Following
several consecutive closing/
opening operations of the electric
window control, a protection system
is triggered which only allows closing
of
the window.
After
closing, wait
approximately
40 minutes. Once this
time has elapsed, the control becomes
operational
again.
1.
Driver's side
2.
Passenger's side
Reinitialisation
Following reconnection of the battery,
or in the event of a malfunction, the
safety anti-pinch function must be
reinitialised. The electrical functions of the electric
windows are deactivated:
-
approximately 45 seconds after the
ignition is switched of
f,
-
after one of the front doors is
opened,
if the ignition is off.
There
are
two
operating
modes:
Press or pull the control, without
passing
the
point
of
resistance.
The window stops when you release
the
control.
One-touch mode
Press or pull the control, beyond the
point
of resistance.
The window opens or closes fully when
the
control is released.
Pressing or pulling the control again
stops
the movement of the window.
Mirrors and windows
Page 116 of 292

11 4
Berlingo2VP_en_Chap05_Securite_ed02-2016
HAZARD WARNING LAMPS
H
ORN
Press the centre of the steering wheel.
PARKING BRAKE
Applying
Pull the parking brake lever up to immobilise
your vehicle.
Check
that the parking brake is applied
firmly
before leaving the vehicle.Pull
on the parking brake lever, only
with the vehicle stationary.
In the exceptional case of use of the
parking
brake when the vehicle is
moving,
apply the brake by pulling
gently
to avoid locking the rear wheels
(risk
of skidding).
Press this button, the direction
indicators
flash.
They
can
operate
with
the
ignition
off.
The hazard warning lamps should only
be used in dangerous situations, when
stopping in an emergency or when
driving
in
unusual
conditions.
When
parking on a slope, direct your
wheels towards the pavement and pull
the
parking brake lever up.
There is no advantage in engaging
a
gear after parking the vehicle,
particularly
if the vehicle is loaded.
If the parking brake is still on or has not been released properly, this is
indicated by this warning lamp which
comes
on in the instrument panel.
Automatic operation of hazard
warning lamps
When braking in an emergency, depending on the force of deceleration,
the hazard warning lamps come
on automatically.
They
switch off
automatically
the first time you
accelerate.
It is also possible to switch them of
f by
pressing
the switch on the dashboard.Releasing
Pull the lever up slightly and press the
button to lower the parking brake lever.
Driving safely
Page 123 of 292

121
Berlingo2VP_en_Chap05_Securite_ed02-2016
Driving safely
Different modes
are
available:
Normal (ESC)
ESC OFF Snow
This mode allows the vehicle
to adapts its strategy to the
conditions of grip encountered
for each of the two front
wheels,
on moving off.
When moving, the system optimises
wheelspin to provide the best
acceleration possible for the grip
available.
Off road
(mud, wet grass, ...)
When moving off, this
mode allows considerable
wheelspin on the wheel
with the least grip to favour
clearing of the mud and
regain
"grip".
At the same time, the wheel with the
most grip is controlled in such a way as
to
transmit as much torque as possible.
When moving, the system optimises
wheelspin to meet the driver's
requirements
as fully as possible.
Sand
This mode allows a little
wheelspin on the two driving
wheels at the same time to
allow the vehicle to move
forward and reduces the risk
of
getting stuck in the sand.
Do not use the other modes on sand
as
the
vehicle may become stuck.
This mode is calibrated for a
low
level
of
skidding,
based
on dif
ferent conditions of grip
encountered
on
the
road.
When the ignition is switched off, the
system returns automatically to DSC
mode.
This mode is only suitable
for
specific
conditions
encountered when moving of
f
or
at
low
speed.
Above
30
mph
(50
km/h)
the system returns to DSC mode
automatically
.
SAFETY
5
Page 124 of 292

122
Berlingo2VP_en_Chap05_Securite_ed02-2016
ACTIVE CITY BRAKE
Active City Brake is a driving assistance system that aims to avoid
a frontal collision or reduce the speed
of an impact if the driver does not
react
sufficiently (inadequate brake
application).
This system is designed to
improve
driving safety.
It remains the driver's responsibility to
continuously monitor the state of the
traffic
and to assess the distances and
relative
speeds of other vehicles.
Active
City Brake can in no
circumstances replace the need for
vigilance
on the part of the driver. Never
look at the laser sensor
through an optical instrument
(magnifying
glass, microscope...)
at a distance of less than
10 centimetres:
risk of eye injury.Principle
Using a laser sensor located at the top
of the windscreen, this system detects
a vehicle running in the same direction
or stationary ahead of your vehicle.
When
necessary, the vehicle's braking
system is operated automatically
to avoid a collision with the vehicle
ahead.
Automatic
braking occurs later
than if done by the driver
, so as
to intervene only when there is a
high
risk of collision.
Conditions for activation
Active City Brake only operates if the following conditions are met:
●
ignition
on,
●
the
vehicle is in a forward gear,
●
speed
is between about 3 and
18 mph
(5 and 30 km/h),
●
the
braking assistance systems
(ABS,
EBFD, emergency braking
assistance) are not faulty
,
●
the
trajectory control systems
(ASR, DSC) are not deactivated
or
faulty,
●
the
vehicle is not in a tight corner,
●
the
system has not been triggered
during
the previous 10 seconds.
Driving safely
Page 126 of 292

124
Berlingo2VP_en_Chap05_Securite_ed02-2016
Deactivation
The system is deactivated in the
vehicle configuration menu, accessible
with
the ignition on.
Its state is memorised when the
ignition
is switched off.
When the system is deactivated,
a message is displayed every
time the ignition is switched on,
to warn
you. With the monochrome screen C
F
Press the
MENU button for access
to
the main menu.
F
Select "
Personalisation-
Configuration".
F
Select "
Define vehicle
parameters".
F
Select "
Driving assistance".
F
Select "
Automatic emergency
braking: OFF" or "Automatic
emergency braking: ON".
F
Press the "
7" or "8" button to
check
or uncheck the box and
activate or deactivate the system
respectively
.
F
Press the "
5" or "6" button, then
the OK button to select the "OK"
box
and confirm or the Back button
to
cancel.With the touch screen tablet
F
Press the "MENU" button.
F Select the " Driving " menu.
F
In the secondary page, select
"
Vehicle settings".
F
Select the "
Driving assistance"
tab.
F
Check
or uncheck the "Auto
emergency braking" box to
activate
or deactivate the system.
F
Confirm.
Driving safely
Page 129 of 292

127
Berlingo2VP_en_Chap05_Securite_ed02-2016
Berlingo2VP_en_Chap05_Securite_ed02-2016
Seat belts
Recommendations for children:
-
use a suitable child seat if the
passenger is less than 12 years old
or
shorter
than
one
metre
fifty,
-
never allow a child to travel on
your lap, even with the seat belt
fastened. For more information on child
seats, refer to the "Child safety"
section
of
chapter
5.
Clean the seat belt straps with
soapy water or a textile cleaning
product, sold by CITROËN
dealers.
In accordance with current safety
regulations, your CITROËN dealer can
guarantee
all
work
or
any
checks,
from
testing to maintenance, on your seat
belt
equipment.
Have
the
seat
belts
checked
regularly
(even after a minor impact) by a
CITROËN
dealer
or
a
qualified
workshop:
they
must
not
show
any
signs of wear
, cutting or fraying
and they must not be converted or
modified.
The force limiter reduces the pressure
of the seat belt against the body of the
occupants.
The pretensioning seat belts are active
when
the
ignition
is
switched
on.
The
inertia
reels
are
fitted
with
a
device
which
automatically
locks
the
strap
in
the event of a collision or emergency
braking
or
if
the
vehicle
rolls
over.
You can unfasten the seat belt by
pressing
the
red
button
on
the
buckle.
Guide
the
seat
belt
after
unfastening.
The airbag warning lamp comes on
if
the
pretensioners
are
deployed.
Contact a CITROËN dealer or a
qualified
workshop.
In
order
to
be
effective,
a
seat
belt:
-
must restrain one person only
,
-
must
not
be
twisted,
check
by
pullin
g in front of you with an even
movement,
-
must be tightened as close to the
body
as
possible.
The upper part of the seat belt should
be positioned in the hollow of the
shoulder.
The lap part should be placed as low
as
possible
on
the
pelvis.
Do not interchange the seat belt
buckles
as
they
will
not
fulfil
their
role
properly
.
If
the
seats
are
fitted
with
armrests, the lap part of the seat belt
should
always
pass
under
the
armrest.
Check
that
the
seat
belt
is
fastened
correctly
by
pulling
the
strap
firmly.
Front seat belts
The front seats are fitted with pretensioners and force limiters.
Rear seat belts
(5 seat version)
The rear seats are fitted with
three-point inertia reel seat belts.
SAFETY
5
Page 132 of 292

130
Berlingo2VP_en_Chap05_Securite_ed02-2016
130
Berlingo2VP_en_Chap05_Securite_ed02-2016
Advice
Sit in a normal upright position.
Wear
a correctly adjusted seat belt.
Do not allow anything to come between
the occupants and the airbags
(a
child, pet, object...), do not attach or
fix
anything near to the airbags or their
trajectories
when inflating as this could
cause
injuries when the airbags are
deployed.
Never
modify the original definition of
your vehicle, particularly in the area
directly
around the airbags.
After an accident or if the vehicle has
been
stolen or broken into, have the
airbag
systems checked.
All
work on the airbag system must be
carried out by a CITROËN dealer or a
qualified
workshop.
Even if all of the precautions
mentioned
are observed, a risk of
injury
or of minor burns to the head,
chest or arms when an airbag is
deployed
cannot be ruled out.
The
bag inflates
almost instantly (within a
few
milliseconds) then deflates within
the same time discharging the hot gas
via
openings provided for this purpose.Front airbags
Do not drive holding the steering wheel
by
its spokes or resting your hands on
the
centre part of the wheel.
Passengers must not place their feet
on
the dashboard.
Do
not smoke as deployment of the
airbags
can cause burns or the risk of
injury
from a cigarette or pipe.
Never remove or pierce the steering
wheel
or hit it violently.
Do
not fit or attach anything to the
steering wheel or dashboard, this could
cause
injuries with deployment of the
airbags.
Lateral airbags
Use only approved covers on the
seats, compatible with the deployment
the
lateral airbags. For information
on the range of seat covers suitable
for your vehicle, you can contact a
CITROËN dealer
.
For more information on accessories,
refer to "Other accessories" in
section 6.
Do
not fix or attach anything to the seat
backs
(clothing...).
This
could cause
injury
to the chest or arms if the lateral
airbag
is deployed.
Do not sit with the upper part of the
body any nearer to the door than
necessary.
Airbags only operate when the
ignition is switched on.
This
equipment
only
operates
once.
If a second impact occurs (during the
same or a subsequent accident), the
airbag
will
not
operate.
The deployment of an airbag or airbags
is accompanied by a slight discharge
of
smoke
and
a
noise,
due
to
the
activation of the pyrotechnic cartridge
incorporated
in
the
system.
This
smoke
is
not
harmful,
but
sensitive individuals may experience
some
irritation.
The noise of the detonation may result
in a slight loss of hearing for a short
time.
The passenger's front airbag must
be deactivated if a child seat is
installed
rearward
facing.
Chapter
5,
"Child
safety"
section.
Airbags
Page 134 of 292

132
Berlingo2VP_en_Chap05_Securite_ed02-2016
132
Berlingo2VP_en_Chap05_Securite_ed02-2016
Front airbags
Deployment
They are deployed, except the
passenger's front airbag if it has been
deactivated, in the event of a serious
front impact applied to all or part of the
front impact zone A in the longitudinal
centreline of the vehicle on a horizontal
plane directed from the front towards
the rear of the vehicle.
The
front airbag inflates between the
front occupant of the vehicle and the
dashboard to cushion their forward
movement. Deactivating the passengers front
airbag
Only the passenger's front airbag can
be
deactivated.
-
W
ith the ignition switched off,
insert the key into the passenger's front
airbag deactivation switch.
- T urn it to the "OFF" position.
-
Remove
the key keeping the switch
in
the new position.
The passenger's front airbag
warning lamp in the instrument
panel remains on while the
airbag
is deactivated.If the two airbag warning lamps
are on continuously, do not install
a rearward facing child seat and
contact a CITROËN dealer or a
qualified
workshop.
Front airbag fault
To ensure the safety of your child,
it is essential to deactivate the
passenger's front airbag when you
install a rearward facing child seat on
the
front passenger seat. Otherwise,
the
child would risk being killed or
seriously
injured if the airbag were
deployed.Reactivation
In the
"OFF" position, the passenger's
front airbag will not be deployed in the
event of an impact.
As soon as the child seat is removed,
turn the passenger's front airbag switch
to the "ON" position to reactivate the
airbag and thus ensure the safety
of your passenger in the event of an
impact.
If this warning lamp comes
on, accompanied by an
audible signal and a message
in the screen, consult a
CITROËN dealer or a
qualified workshop to have the
system checked.
The
front airbags are fitted in the
centre of the steering wheel for the
driver and in the dashboard for the
front
passenger.
Airbags
Page 149 of 292

147
Berlingo2VP_en_Chap05_Securite_ed02-2016
147
Berlingo2VP_en_Chap05_Securite_ed02-2016
CHILD LOCK
This prevents opening of the siding
side doors from the inside.
Manual Electric
With the ignition on, press
this button in the middle of
the
dashboard.
Indicator lamp on = child
lock on.
Please
note: this system is
independent
of the central locking
control.Always
remove the ignition key
when leaving the vehicle, even for
a
short time.
It
is
advisable to check the state of
the
child
lock each time the ignition is
switched
on.
In the event of a serious impact the
electric
child lock is deactivated
automatically
.
A label indicates the position of the
lever
and
the
state
of
the
child
lock.
-
Open fully past the point of
resistance.
-
T
ilt the lever, located on the rear
section
of
the
door.
SAFETY
5
Child safety