brake CITROEN C-ELYSÉE 2012 Owners Manual

.
.
Contents
Instrument panel 22
Indicator and warning lamps 23
Ser vice indicator 32
Distance recorders 34
Setting the date and time 35
Tr i p c o m p u t e r 36
Monochrome screen C(Audio system / Bluetooth) 38
Monitoring Familiarisation
Remote control key 42
Alarm 46
Doors 48
Boot 49
Windows 51
Fuel tank 52
Misfuel prevention (Diesel) 53
Access
Front seats 55
Rear seats 57
Mirrors 58
Steering wheel adjustment 60
Ventilation 61
Heating 63
Manual air conditioning(without display screen) 63
Electronic air conditioning (with screen) 65
Front demist - defrost 68
Rear screen demist - defrost 69
Comfort
Starting - stopping the engine 75
Manual parking brake 76
Manual gearbox 77
Electronic gearbox 78
Automatic gearbox 82
Speed limiter 85
Cruise control 87
Rear parking sensors 89
Driving
Lighting control 91
Headlamp adjustment 96
Wiper control 97
Courtesy lamps 99
Visibility Eco-driving
Interior fi ttings 70
Boot fi ttings 73
Fittings

.
9
Familiarisation
Instruments and controls
1.
Steering lock and ignition switch. 2.Wiper and screenwash / trip computer control stalk. 3.Central locking button. 4.
Open storage.
or
Monochrome screen C (Audio system / Bluetooth).
5. Adjustable centre air vents.
6.Windscreen demisting/defrosting vent.
7. Passenger's airbag.8.Glove box.
Passenger's airbag deactivation switch.9. Hazard warning lamps button. 10.Audio system. 11.
Heating / Air conditioning controls.12.
Ashtray / Cup holder.13.Electric window switches.14.Gear lever. 15.Parking brake.

.
17
Familiarisation
Driving safely


Electronic gearbox


Five-speed electronically controlled gearbox
offering the choice of the comfor t of automated
operation or the pleasure of manual gear changing.1. Gear lever.

Display in the instrument panel
The gear engaged or the driving mode selected appears in the instrument panel screen. N.Neutral.R.
Reverse.
1 to 5. Gears engaged. AUTO.Automated mode.


Moving off
)
Select position N.)
Press firmly on the brake pedal. )
Start the engine.)
Select the automated mode (position A
) Aor manual mode (position M ) by moving
the gear lever 1,
or
engage reverse by pushing the gear
lever 1 to position R . )
Release the parking brake. )
Progressively take your foot off the brake
pedal: the vehicle moves off.
7
8

18
Familiarisation
82
Driving safely
Automatic gearbox
Four-speed gearbox offering the choice of the comfor t of automatic operation or the pleasure
of manual gear changing.1. Gear lever.2."S"
(sport) button.3."7"
(snow) button.


Display in the instrument panel

The gear engaged or the driving mode selected
appears in the instrument panel screen.P.Park. R. Reverse.
N.Neutral.D.Drive (automatic forward drive).
S.Sport programme. 7Snow
programme.
1 to 4. Gears engaged.-.
Invalid value in manual operation.


Moving off
)Apply the parking brake. )Select position P
or N.)Start the engine.)Press the brake pedal. )Release the parking brake. )Then select position R
, D
or M
. )Progressively take your foot off the brake pedal: the vehicle moves off.

20
Familiarisation















































Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2emissions.
Optimise the use of your
gearbox
With a manual gearbox, move off gently,change up without waiting and drive by changing up quite soon.
With an automatic or electronic gearbox, stay in Drive "D"or Auto "A"
, according to the type of gearbox, without pressing theaccelerator pedal heavily or suddenly.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than the brake pedal, and press the accelerator progressively. These practices contribute towards a reduction in fuel consumption and CO2 emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds above 25 mph (40 km/h) when the traffic is flowing well.


Control the use of your
electrical equipment


Before moving off, if the passenger compartment is too warm, ventilate it byopening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents open.
Remember to make use of equipment that canhelp keep the temperature in the passenger compartment down (window blinds...).
Switch off the air conditioning as soon as the desired temperature is attained.
Switch off the demisting and defrostingcontrols, if not automatic. Switch off the heated seat as soon as possible.


Switch off the headlamps and foglamp whenthe level of light does not require their use.

Avoid running the engine before moving off,particularly in winter; your vehicle will warmup much faster while driving.

As a passenger, if you avoid connecting your multimedia devices (film, music, videogame...), you will contribute towards limitingthe consumption of electrical energy, and soof fuel.
Disconnect your por table devices beforeleaving the vehicle.

1
25
Monitoring
Warning / indicator lampStateCauseAction / Observations
Diesel engine pre-heating fixed. The ignition switch is at
the 2nd position (ignition on). Wait until the warning lamp goes off before star ting.
The period of illumination of the warning lamp is
determined by the climatic conditions (up to about
thir ty seconds in extreme climatic conditions).
If the engine does not star t, switch the ignition off and
then on, wait until the warning lamp goes off again,
then start the engine.
Parkingbrake fixed. The parking brake is applied or notproperly released. Release the parking brake to switch off the warninglamp, keeping your foot on the brake pedal.
Obser ve the safety recommendations.
For further information on the parking brake, refer to
the "Driving" section.
Foot on thebrake pedal fixed. The brake pedal must be pressed. With an electronic gearbox, press the brake pedal to start the engine (lever in position N).
With an automatic gearbox, with the engine running,
press the brake pedal before releasing the parking
brake, to unlock the lever and come out of position P . PIf you wish to release the parking brake without pressing the brake pedal, this warning lamp will
remain on.

flashin
g. With an electronic gearbox, if you hold the vehicle on an incline using
the accelerator for too lon
g, the clutchoverheats. Use the brake pedal and/or the parkin
g brake.

28
Monitoring
Warning / indicator lampStateCauseAction / Observations
Braking fixed. The braking system fluid level has
dropped significantly. You must stop as soon as it is safe to do so.
Top up with brake fluid listed by CITROËN.
If the problem persists, have the system checked by a CITROËN dealer or a qualified workshop.
+
fixed, associatedwith the ABS warning lamp. Th
e electronic brake force distribution (EBFD) system has a fault. You must stop as soon as it is safe to do so.
Have it checked by a CITROËN dealer or a qualified
workshop.


Maximum coolanttemperature

fixed red. The temperature of the cooling system is too high. Stop as soon as it is safe to do so.
Wait until the engine has cooled down before toppingup the level, if necessary.
If the problem persists, contact a CITROËN dealer or qualified workshop.

76
Driving





Manual parking brake
Application
)Pull the parking brake lever up toimmobilise your vehicle.



Release
)
Pull the parking brake lever up gently,
press the release button then lower the
lever fully.
When parking on a slope, direct your wheels against the kerb, apply the parking brake, engage a gear and switch off the ignition.
When the vehicle is being driven,
if this warning lamp and the STOPwarning lamp come on, accompanied by an audible signal and a message in the
screen, indicating that the parking brake is stillon or has not been fully released.

78
Driving

Gear lever















Electronic gearbox


Displays in the instrument panel


Gear lever positions
N.NeutralR.Reverse
1 2 3 4 5.Gears in manual mode.
AUTO. This comes on when automated mode
is selected. It goes off when changing to
manual mode.
R. Reverse ) With your foot on the brake, move the lever for wards to select this position.N.Neutral. )
With your foot on the brake, select this
position to start the engine.
A . Automated mode.) Move the lever backwards to select this
mode. M + / -.Manual mode with sequential gear changing.)
Move the lever backwards, then to the left
to select this mode, then:


- push for wards to change up a gear,

- or push backwards to change down a gear.
Five-speed electronicall
y controlled gearbox
which offers a choice between the comfort of automated operation or the pleasure of manualgear changing.
Tw o d r i v i ng modes are offered: -automatedmode for automatic control
of the gears by the gearbox, without anyaction by the driver,- manualmode for the sequential changingof the gears by the driver, using the gear lever.
)Place your foot on the brakewhen this warning lamp flashes (e.g.: star ting the engine).

79
5
Driving
N
appears in the instrument panel.
N
flashes in the instrument panel screen if the gear lever is not in position Nwhen starting.


You must keep your foot on the brakepedal while star ting the engine.
The vehicle then moves off on itsown (refer to the paragraph "Creepfunction").
)
Select automated mode (position A
), A
manual mode (position M ) or reverse (position R
) R
AUTO
and 1
, 1
or R
appear in the
instrument panel.
) Release the parking brake.)
Progressively take your foot off the brake
pedal.

Moving off
)Select position N.
)Press the brake pedal fully.)Star t the engine.
Do not press the brake and clutch pedals simultaneously. This can cause rapid clutch wear.


The creep function may be temporarilyunavailable if the clutch temperature istoo high or the slope too steep.



Do not leave children unsuper visedinside the vehicle when the engine is running.
)
Accelerate away.


Creep function

This function allows the vehicle to be
manoeuvred more easily at low speeds (when
parking, in traffic jams...).
With the gear lever in position A, Mor R, the
vehicle moves as soon as you take your foot off the brake pedal, at low speed andwith the engine at idle.