display Citroen C ZERO 2011 1.G Owner's Manual

Familiarisation
14
Monitoring



1.
With the ignition on, the orange and red
warning lamps come on.

2.
With the engine running, these warning
lamps go off.
If a warning lamp remains on, refer to
the relevant page.

Warning lamps


19



A.
"Neutral" position.

B.
Energy consumption.

C.
"Eco" zone.

D.
"Charge" zone.


Energy consumption/
generation indicator

27

Four successive aler ts indicate that the energy
available in the main battery is dropping to a
low level:


- 2 bars of the energy gauge in the
instrument panel, on and flashing:
star ting to use the reser ve.

- The last bar in the energy gauge flashing.

- The last bar disappears:
display of the range disappears; the heating
and air conditioning are switched off.

Low energy alerts


- Display of this warning lamp in
the instrument panel:
Progressive reduction in the
power available from the motor.

26

Monitoring
18








Instrument panel
Panel bringing together the various gauges and indicators for the operation of the vehicle.


1.
State of charge gauge for the main
battery.



Drive

selector position indicator.


2.
Energy consumption/generation
indicator.


3.
Speedometer.


4.
Screen.


A.
Total distance recorder.


B.
Trip distance recorder (Trip A or B).


C.
Instrument panel lighting dimmer.


D.
Indicator of distance remaining to the
next service.


E.
Indicator of time remaining to the next
service.


F.
Indicator of remaining range.




5.
Screen control button.


Displays the various functions in turn.
Resets the function selected (trip recorder
or ser vice indicator).
Adjusts the level of instrument lighting.
For more information, refer to the
corresponding section.

Gauges and indicators

Screen

Monitoring
26
Main battery state of charge indicator


Display

Four successive aler ts indicate that the energy
available in the main battery is dropping to a
low level:


- 2 bars of the state of charge gauge in
the instrument panel, on and flashing:
star ting to use the reser ve.

- The last bar in the state of charge gauge
flashing.

- The last bar disappears: display of the
range disappears; the heating and air
conditioning are switched off.

Low energy alerts


- Display of this warning lamp in
the instrument panel: progressive
reduction in the power available
from the motor.
The state of charge of the main battery is
displayed continuously in the instrument panel.

i
Monitoring
28








Instrument panel screen
When the ignition switch is in the " ON
" position, press button A
repeatedly to display the following information in turn.







Distance recorder

System for measuring the total distance
travelled by the vehicle during its life.
Press button A
.
The total distance appears in the screen.

Reset to zero

With the ignition on and either trip A
or B

displayed, press the button for more than
2 seconds.








Trip distance recorder (Trip A or B)

Each of these trip recorders indicates the
distance travelled since the last reset.
Press button A
to display the desired trip.


Changing the speedometer units

With the total distance recorder displayed,
press and hold button A
for a few seconds to
change the speedometer units (mph or km/h).
The range indicator is displayed in the
units (miles or km) corresponding to those
of the speedometer (mph or km/h).

1
Monitoring
29






Service indicator

When the ignition is switched on, press
button A
several times in succession until
the ser vice indicator is displayed in the desired
units.
This point can be indicated in one of two ways:


- the miles (km) remaining,

- the time remaining to the next ser vice.



Operation



1.
The screen indicates that 620 miles
(1 000 km) or 1 month remain before
the next service.

2.
The screen indicates that the date for
the ser vice has been exceeded.
Every time the ignition is switched on,
the ser vice spanner is displayed for a
few seconds to remind you that a ser vice
should be carried out as soon as possible.

3.
Once the ser vice has been carried out,
the distance or the number of months to
the next ser vice is displayed again.
System which informs the driver when
the next ser vice is due in accordance with
the manufacturer's ser vicing schedule.
The point at which the next ser vice is due
is calculated from the last ser vice indicator
zero reset.
System for manual adjustment of the brightness
of the instruments and controls in relation to
the exterior brightness.
With the lighting on or off, press button A
to
select the function, then hold down to change
the intensity of the lighting of the instruments
and controls in "day" or "night" mode.
The intensity of the lighting increases each time
button A
is pressed.
When the lighting reaches the maximum
setting, press again to change to the minimum
setting.
When the lighting reaches the required
intensity, release button A
.
The setting is saved when you release button A

and retained when the ignition is turned OFF.










Lighting dimmer

i
i
i
Monitoring
30
This function gives an estimate of the number
of miles (km) that your vehicle can still cover,
based on the recent conditions of use (driving
style, use of heating, air conditioning...).






Range indicator

When the remaining range falls to a low level,
"- - -"
is displayed in the instrument panel.

The display of "---"
, indicating that
the ser vice date has arrived, comes on
automatically after a cer tain time and
distance travelled. The screen then
indicates the time remaining before
the next ser vice is due.



Resetting the service indicator to zero

After each ser vice, the ser vice indicator should
be rest to zero.
The procedures is as follows:


)
Switch off the ignition (switch in the LOCK
or ACC position).

)
Press the reset button A
several times in
succession until the ser vice indicator is
displayed.

)
Press and hold the reset button for a few
seconds until the spanner flashes
.

)
Press the reset button while the spanner is
flashing to change the display from "---"
to
"CLEAR"
.
The distance (or time) remaining before
the next ser vice is due is displayed. The range can be displayed in miles or
kilometres.
To change the units, refer to the
"Distance recorder" section.

Driving
54

P.
Park.
This position is used for star ting the
vehicle.
To come out of the P
position, you must
have your foot on the brake.

R.
Reverse.

N.
Neutral.

D.
Drive (For ward).












Drive selector


Selector positions

When you move the drive selector through the
grille to select a position, the corresponding
indicator is displayed in the instrument panel.


Displays in the instrument panel

With the motor running, P
appears in the
instrument panel screen.


)
Press the brake pedal to come out of
position P
.

)
Select for ward ( D
) or reverse ( R
) gear.

)
Release the parking brake.

)
Take your foot off the brake pedal, the
vehicle then moves off slowly to facilitate
manoeuvring.

)
Accelerate to go for wards or backwards.

)
"D"
or "R"
appears in the instrument panel
screen.



Moving off

Visibility
56





Lighting controls


Main lighting

The various front and rear lamps of the vehicle
are designed to adapt the lighting progressively
in relation to the climatic conditions and so
ensure the best visibility for the driver:


- sidelamps, to be seen,

- dipped beam headlamps to see without
dazzling other drivers,

- main beam headlamps to see clearly when
the road is clear.



Additional lighting

Other lamps are provided to fulfil the
requirements of par ticular driving conditions:


- a rear foglamp to be seen from a distance,

- front foglamps for even better visibility,

- daytime running lamps to be seen during
the day.




Selection ring for main lighting
mode
Turn the ring to position the symbol required
facing the mark.


Automatic illumination of headlamps.
Sidelamps only.

Dipped or main beam headlamps.


Stalk for switching headlamp beam

Pull the stalk to switch the lighting between
dipped/main beam headlamps.

In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.


Displays

Illumination of the corresponding indicator lamp
in the instrument panel confirms the lighting
switched on.

Lighting off.

!
Safety
72

Anti-slip regulation (ASR)
and electronic stability
programme (ESP)














Trajectory control systems



Deactivation

In exceptional conditions (starting a vehicle
which is bogged down, stuck in snow, on soft
ground, ...), it may be advisable to deactivate
the ASR and ESP systems, so that the wheels
can move freely and regain grip.


)
Press this button button, located on the
dashboard to the right of the steering
wheel, until the corresponding symbol
appears in the instrument panel screen.


Activation

These systems are activated automatically
each time the vehicle is star ted.
They come into operation in the event of a grip
or trajectory problem.
The display of this symbol indicates
that the ASR and ESP systems are
deactivated.


Reactivation

These systems are not reactivated
automatically.


)
Press this button again to reactivate them
manually.
The symbol going off in the instrument panel
indicates the reactivation of the ASR and ESP
systems.
The anti-slip regulation (also known as Traction
Control) optimises traction to prevent skidding
of the wheels, by acting on the brakes of the
driving wheels and on the engine.
The electronic stability programme acts on the
brake of one or more wheels and on the engine
to keep the vehicle on the trajectory required
by the driver, within the limits of the laws of
physics.
This is indicated by flashing of this
warning lamp in the instrument panel.
The ASR /ESP systems offer
exceptional safety in normal driving, but
this should not encourage the driver to
take extra risks or drive at high speed.
The correct functioning of these
systems depends on obser vation of
the manufacturer’s recommendations
regarding the wheels (tyres and rims),
the braking components, the electronic
components and the assembly
and repair procedures used by the
CITROËN dealer network.
After an impact, have these systems
checked by a CITROËN dealer or a
qualified workshop.



Operating fault

The display of this message
in the instrument panel
indicates a malfunction of
these systems.
Contact a CITROËN dealer or a qualified
workshop to have the ASR /ESP systems checked.

7
Safety
73
Seat belts


Front seat belts











Fastening



)
Pull the strap, then inser t the tongue in the
buckle A
.

)
Check that the seat belt is fastened
correctly by pulling the strap.



Front seat belt not fastened/
unfastened warning lamp
If the driver does not fasten their seat belt
within one minute after switching on the
ignition, the warning lamp flashes accompanied
by an intermittent audible signal.
After about 90 seconds, the warning lamp, the
audible signal and the display stop, and then
return until the driver fastens their seat belt.
If the seat belt is unfastened while the vehicle
is moving
, you are warned by the same aler ts.

The front seat belts are fitted with a
pretensioning and force limiting system.
This system improves safety in the front
seats in the event of a front or side impact.
Depending on the severity of the impact, the
pretensioning system instantly tightens the seat
belts against the body of the occupants.
The pretensioning seat belts are active when
the ignition is on.
The force limiter reduces the pressure of the
seat belt on the chest of the occupant,
so improving their protection.



Unfastening



)
Press the red button on the buckle A
.


When the ignition is switched on, this
warning lamp comes on accompanied
by an audible signal for a few seconds
if the driver and/or passenger has not
fastened their seat belt.