ignition CITROEN C1 2018 Owner's Manual

89
C1_en_Chap04_conduite_ed01-2016
Speed limiter (VTi 68 engine)
System which prevents the vehicle from exceeding the speed programmed by the driver.
T he   speed   limiter   is   switched on
 m
anually:
 t

his   can   be   done   whatever   the   speed   of   the  
v

ehicle.   However,   if   you   are   driving   at   less   than  
2

0   mph   (30   km/h),   the   programmed   speed   will  
b

e   fixed   at   20   mph   (30   km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
The
  programmed   limit   speed   is   erased  
w

hen   switching   off   the   ignition.
Steering mounted controls
The controls are grouped together on this control   stalk   at   the   steering   wheel.
1.
 S

peed   limiter   on   /   off:   by   pressing   the   end  
o

f   the   control   stalk.
2.
 P

rogramming   the   speed
 D

ecrease   the   setting:   by   pushing   the  
c

ontrol   stalk   down.
3.
 R

estore   speed   limiter
 I

ncrease   the   setting:   by   pushing   the   control  
s

talk   up.
4.
 P

ause   speed   limiter:   by   pulling   the   control  
s

talk   towards   you.
Displays in the instrument panel
The information is grouped together in the instrument   panel   screen.
5.
 S

peed   limiter   on   /   pause   indication.
6.
 S

peed   value   setting.
The speed limiter cannot, in any circumstances,   replace   the   need   to   observe s

peed   limits,   nor   can   it   replace   the   need   for
 v

igilance   on   the   part   of   the   driver.
If you choose to display other information (trip  A
  for   example),   the   speed   limiter  
i

nformation   is   automatically   displayed   again  
a

fter   about   6   seconds.
4
Driving

94
C1_en_Chap04_conduite_ed01-2016
Deactivation
Operating faultDisplays in the instrument panel
The detection may be impeded:
-  i f   the   ground   markings   are   worn,
-
 
i
f   there   is   little   contrast   between   the   markings   on   the   ground   and   the   road   sur face,
-
 
i
f   the   windscreen   is   dirty,
-
 
i
n   certain   extreme   weather   conditions:   fog,   heavy   showers,   bright   sunlight   or   direct  
e

xposure   to   the   sun   (low   sun,   leaving   a   tunnel...)   and   shadows.F
 
P
ress   this   button   again.
The   status   of   the   system   remains   in   the  
m

emory   when   the   ignition   is   switched   off.
In the event of a malfunction, this (orange) w
arning   lamp   comes   on   in   the   instrument   panel.
Contact a CITROËN dealer or a qualified workshop   without   delay.
Display
 
in
 
the
 
instrument
 
panel
Comments
The
 
function
 
has
 
been
 
activated
 
(green
 
indicator).
The
 
system
 
has
 
identified
 
a
 
marking
 
on
 
the
 
ground
 
(green
 
i

ndicator).
The
 
system
 
is
 
alerting
 
you
 
that
 
a
 
road
 
marking
 
is
 
being
 
crossed
 (

green
 
and
 
orange
 
warning).
The
 
display
 
of
 
this
 
warning
 
is
 
accompanied
 
by
 
an
 
audible
 
signal.
Driving

97
C1_en_Chap04_conduite_ed01-2016
The under-inflation alert can only be considered   reliable   if   reinitialisation   of  
t

he   system   is   done   with   the   the   four   tyre  
p

ressures   correctly   set.
Snow chains
The system does not have to be reinitialised   after   fitting   or   removing  
sn

ow
 c
hains.
Operating fault
The flashing and then fixed illumination of   the   under-inflation   warning   lamp i

ndicates   a   fault   with   the   system.
In
 
this
 
case,   under-inflation   monitoring   of   the  
t

yres
 
is
 
no   longer   assured.
Have
 
the
 
system   checked   by   a   CITROËN  
d

ealer
 
or
 
a   qualified   workshop.
Before
  doing   anything   to   the   system,  
t

he
  pressures   of   the   four   tyres   must   be  
c

hecked   and   the   system   reinitialised.
Reinitialisation
 
of
 
the
 
system
 
is
 
done
 
with
 
the
 
i

gnition on
 

(ignition
 
switch
 
in
 
the
 
" ON " position
or " ON"
 
mode)
 
and
 
the
 
vehicle
 
stationary.
F
 
O

pen
 
the
 
glove
 
box.
F
 
P

ress
 
the
 
reinitialisation
 
button.
The
 
new
 
pressure
 
settings
 
registered
 
a

re
 
considered
 
to
 
be
 
reference
 
values
 
by
 
t

he system. F
 
T

his
 
warning
 
lamp
 
flashes
 
3 t

imes
 
in
 
the
 
instrument
 
panel
 
w

hen
 
the
 
reinitialisation
 
is
 
done.
F
 
W

ait
 
a
 
few
 
minutes
 
before
 
switching
 
off
 
the
 
i

gnition
 
(ignition
 
switch
 
in
 
the
 
" ACC "
or " LOCK " position, or " OFF"
 
mode).
4
Driving

100
C1_en_Chap05_eclairage-visibilite_ed01-2016
Foglamp selection ring
The foglamp operates with the dipped and main beam h eadlamps.
F
 
T
urn   the   ring   for ward   and   release   to   switch  
o

n   the   rear   foglamp.
When
  the   lighting   is   switched   off   automatically  
(

with   AUTO   model)   or   when   the   dipped   beam  
h

eadlamps   are   switched   off   manually,   the  
f

oglamp   and   the   sidelamps   will   remain   on.
F
 
T
urn   the   ring   rear ward   and   release   to  
s

witch   off   all   the   lamps.
Rear
 fo

glamp. In
  good   or   rainy   weather,   both   day  
a

nd   night,   use   of   the   rear   foglamp   is  
p

rohibited.   In   these   situations,   the  
p

ower   of   its   beam   may   dazzle   other  
d

rivers.   It   should   only   be   used   in   fog   or  
s

now.
In   these   weather   conditions,   it   is   your  
r

esponsibility   to   switch   on   the   foglamp  
a

nd   dipped   beam   headlamps   manually  
a

s   the   sunshine   sensor   may   detect  
s

ufficient   light.
Do   not   forget   to   switch   off   the   rear  f
oglamp   when   it   is   no   longer   needed.
Switching off the lamps when
the ignition is switched off
On switching off the ignition, all of the l
amps   turn   off   immediately,   except   for  
d

ipped   beam   if   guide-me-home   lighting  
i

s   activated.
Switching on the lamps
after the ignition is
switched off
To reactivate the lighting control, rotate the   ring   to   the   "0"  position   -   lamps   off,  
t

hen   to   the   desired   position.
On
  opening   the   driver's   door   a  
c

ontinuous   audible   signal   warns   the  
d

river   that   the   lighting   is   on.
Lighting and visibility

102
C1_en_Chap05_eclairage-visibilite_ed01-2016
Manual guide-me-home
lighting*
Temporarily keeping the dipped beam headlamps   on   after   the   vehicle's   ignition   has b

een   switched   off   makes   the   exit   of   the   vehicle's
 o

ccupants   easier   when   the   light   is   poor.
Switching on
F Place  the   lighting   control   stalk   in   the  "
lighting   off "   or   "AUTO"   position.
F
 
W
ith   the   ignition   off,   "flash"   the   headlamps  
u

sing   the   lighting   control   stalk.
The
  lighting   comes   on   for   about   30   seconds.
Switching off
The manual guide-me-home lighting switches off   immediately   if   you.
-
 
f
lash   the   headlamps   again,
-
 
p
lace   the   lighting   control   stalk   in   another  
p

osition,
-
 
s
witch   the   ignition   on.
*
 
Depending
 
on
 
version.
Lighting and visibility

106
C1_en_Chap06_securite_ed01-2016
Horn
Audible warning to alert other road users to an imminent d anger.
When
  manoeuvring   the   vehicle,  
t

ake   care   not   to   operate   the   horn  
u

nintentionally.
F
 
P
ress   one   of   the   steering   wheel   spokes.F
 
P
ress   the   central   part   of   the   steering  
w

heel.
Hazard warning lamps
Visual warning with of all the direction i
ndicators   flashing   to   alert   other   road   users   to   a  
v

ehicle   breakdown,   towing   or   accident.
F
 
P
ress   this   button,   all   of   the   direction  
in

dicators
 f
lash.
They
  can   operate   with   the   ignition   off.
Safety

115
C1_en_Chap06_securite_ed01-2016
Seat belts
Front seat belts
Fastening
F Pull  the   strap,   then   insert   the   tongue   in   the  buc
kle.
F
 
C
heck   that   the   seat   belt   is   fastened  
c

orrectly   by   pulling   the   strap.
The
 
front
 
seat
 
belts
 
are
 
fitted
 
with
 
a
 p
retensioning
 
and
 
force
 
limiting
 
system.
This
 
system
 
improves
 
safety
 
in
 
the
 
front
 
s

eats
 
in
 
the
 
event
 
of
 
a
 
front
 
or
 
side
 
impact.
 
D

epending
 
on
 
the
 
severity
 
of
 
the
 
impact,
 
the
 
p

retensioning
 
system
 
instantly
 
tightens
 
the
 
seat
 
b

elts
 
against
 
the
 
body
 
of
 
the
 
occupants.
The
 
pretensioning
 
seat
 
belts
 
are
 
active
 
when
 
t

he
 
ignition
 
is
 
on.
The
 
force
 
limiter
 
reduces
 
the
 
pressure
 
of
 
the
 
s

eat belt on the chest of the occupant, so
improving
 
their
 
protection.
Rear seat belts
The rear seats are each fitted with a three-point s eat   belt.
Unfastening
F Press   the   red   button   on   the   buckle.
F  G uide   the   seat   belt   as   it   reels   in.
6
Safety

118
C1_en_Chap06_securite_ed01-2016
Airbags
Designed to contribute towards the safety of the   occupants   in   the   event   of   violent   collisions.  
T

he   airbags   supplement   the   action   of   the   force-
limiting
  seat   belts.
If
  a   collision   occurs,   the   electronic   detectors  
r

ecord   and   analyse   the   front   and   side   impacts  
s

ustained   in   the   impact   detection   zones:
-
 
i
n   the   case   of   a   serious   impact,   the   airbags  
a

re   deployed   instantly   and   contribute  
t

owards   better   protection   of   the   occupants  
o

f   the   vehicle;   immediately   after   the   impact,  
t

he   airbags   deflate   rapidly   so   that   they  
d

o   not   hinder   visibility   or   the   exit   of   the  
o

ccupants,
-
 
i
n   the   case   of   a   minor   or   rear   impact   or   in  
c

ertain   roll-over   conditions,   the   airbags  
m

ay   not   be   deployed;   the   seat   belt   alone  
c

ontributes   towards   providing   your  
p

rotection   in   these   situations.
The airbags do not operate when the
ignition is switched off. The
  deployment   of   an   airbag   is  
a

ccompanied   by   a   slight   emission  
o

f   smoke   and   a   noise,   due   to   the  
d

etonation   of   the   pyrotechnic   charge  
i

ncorporated   in   the   system.
This
  smoke   is   not   harmful,   but   sensitive  
i

ndividuals   may   experience   slight  
ir

ritation.
The
  detonation   noise   associated   with  
t

he   deployment   of   an   airbag   may   result  
i

n   a   slight   loss   of   hearing   for   a   short  
t

ime.
This
  equipment   will   only   deploy   once.  
I

f   a   second   impact   occurs   (during   the  
s

ame   or   a   subsequent   accident),   the  
a

irbag   will   not   be   deployed   again.
Impact detection zones
A. Front  impact   zone.
B. S ide   impact   zone.
Front airbags
Deployment
The airbags are deployed, except the passenger's   front   airbag   if   it   is   deactivated,   in   the e

vent   of   a   serious   front   impact   to   all   or   part   of   the
 f

ront   impact   zone   A,
  in   the   longitudinal   centreline
 o

f   the   vehicle   on   a   horizontal   plane   and   directed
 f

rom   the   front   to   the   rear   of   the   vehicle.
The
  front   airbag   inflates   between   the   thorax   and
 h

ead   of   the   front   occupant   of   the   vehicle   and   the
 s

teering   wheel,   driver's   side,   and   the   dashboard,
 p

assenger's   side   to   cushion   their   for ward
 m

ovement.
System
  which   protects   the   driver   and   front  
p

assenger   in   the   event   of   a   serious   front   impact  
i

n   order   to   limit   the   risk   of   injury   to   the   head   and  
t

horax.
The   driver's   airbag   is   fitted   in   the   centre   of   the  
s

teering   wheel;   the   front   passenger's   airbag   is  
f

itted   in   the   dashboard   above   the   glove   box.
Safety

119
C1_en_Chap06_securite_ed01-2016
Deactivating the passenger's
front airbag
Only the passenger's front airbag can be deactivated.
F

W
ith the ignition off ,
  insert   the   key   in   the  
p

assenger   airbag   deactivation   switch.
F

T
urn it to the "OFF"
 p
osition.
F
 
R
emove   the   key   keeping   the   switch   in   the  
n

ew   position.When
  the   ignition   is   on,   this   warning  
l

amp   comes   in   the   seat   belt   and  
p

assenger's   front   airbag   display  
s

creen.   It   stays   on   while   the   airbag   is  
d

eactivated. To
  assure   the   safety   of   your   child,  
t

he   passenger's   front   airbag   must   be  
d

eactivated   when   you   install   a   rear ward  
f

acing   child   seat   on   the   front   passenger  
sea

t.
Other wise,   the   child   would   risk   being  
s

eriously   injured   or   killed   if   the   airbag  
w

ere   deployed.
Reactivating the passenger's
front airbag
When you remove a rear ward facing child seat, w
ith the ignition off , turn the switch to the
"ON"
 

position   to   reactivate   the   airbag   and   so  
a

ssure   the   safety   of   your   front   passenger   in   the  
e

vent   of   an   impact.
When
  the   ignition   is   switched   on,   this  
w

arning   lamp   comes   on   in   the   seat  
b

elt   and   passenger's   front   airbag  
d

isplay   screen.   It   stays   on   while   the  
f

ront   airbag   is   activated.
Operating fault
Illumination of this warning lamp in the   instrument   panel   indicates   a   fault  
w

ith   the   airbags.
Contact
 
a
  CITROËN   dealer   or   a   qualified  
w

orkshop
  without   delay   to   have   the   system  
c

hecked.
 
The   airbags   may   no   longer   be  
d

eployed
 
in   the   event   of   a   serious   impact.
In
 
this
 
case,   do   not   install   a   child   seat   or   seat  
a

n
 
adult
 
on   the   front   passenger   seat.
6
Safety

137
C1_en_Chap06_securite_ed01-2016
Child lock
This prevents the opening of the rear doors from   the   inside.
The
  controls   are   located   on   the   edge   of   each  
r

ear   door.
F
 
L
ower   the   control.
Check
  the   status   of   this   safety   device   before  
s

witching   on   the   ignition.
This
  system   is   independent   of   the   central  
l

ocking.
6
S