light Citroen C3 PICASSO 2008.5 1.G Repair Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C3 PICASSO, Model: Citroen C3 PICASSO 2008.5 1.GPages: 204, PDF Size: 11 MB
Page 130 of 204
i
118
PRACTICAL INFORMATION Changing integrated direction
indicator side repeaters
Contact a CITROËN dealer to obtain re-
p l a c e m e n t r e p e a t e r s .
Insert a screwdriver on the edge of
t h e r e p e a t e r .
Tilt the screwdriver to extract the re-
p e a t e r a n d r e m o v e i t .
D i s c o n n e c t t h e r e p e a t e r c o n n e c t o r .
When removing:
- be careful not to damage the paint- work of your vehicle with the screw-
driver,
- do not allow the wire and the con- n e c t o r t o s l i d e i n s i d e t h e w i n g .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r .
Changing main beam headlamp
bulbs
Remove the protective plastic cover
b y p u l l i n g o n t h e t a b .
D i s c o n n e c t t h e b u l b c o n n e c t o r .
Move the springs to release the
b u l b .
R e m o v e t h e b u l b a n d c h a n g e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r .
Changing side light bulbs
Remove the protective plastic cover
b y p u l l i n g o n t h e t a b .
P u l l t h e b u l b - h o l d e r .
R e m o v e t h e b u l b a n d r e p l a c e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r .
Changing dipped headlamp bulbs
Remove the protective plastic cover
b y p u l l i n g o n t h e t a b .
T u r n t h e b u l b - h o l d e r b y a q u a r t e r
t u r n .
R e m o v e t h e b u l b a n d c h a n g e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n
r e v e r s e o r d e r .
I f y o u e x p e r i e n c e a n y d i f fi c u l t y
in replacing bulbs, contact your
C I T R O Ë N d e a l e r .
Page 132 of 204
PRACTICAL INFORMATION
Rear lights
1. Brake/side lights (12VP21/5 W).
2. Fog lamp, right-hand side (PR21 W)
Reversing light, left-hand side
(P21 W).
3. Direction indicators (P 21 W) Changing brake/side lights and
direction indicator bulbs
u n s c r e w t h e t w o l i g h t fi x i n g b o l t s ,
extract the light carefully pulling it by
its shaft,
t u r n t h e b u l b h o l d e r a q u a r t e r t u r n ,
r e m o v e t h e f a u l t y b u l b a n d r e p l a c e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r .
Page 133 of 204
121
PRACTICAL INFORMATION
Changing fog/reversing light bulbs
open the boot,
press on the tabs using 2 screwdrivers,
disconnect the light connector,
t u r n t h e b u l b h o l d e r b y a q u a r t e r
turn,
r e m o v e t h e b u l b a n d r e p l a c e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r . Changing the third stop light bulbs
(4 x W 5 W bulbs)
open the boot,
remove the two plugs located on the
boot inner panel,
press on the body of the light with
2 screwdrivers to remove it from its
housing,
turn the corresponding bulb-holder
a q u a r t e r t u r n ,
p u l l t h e b u l b a n d r e p l a c e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r . Changing the number plate light
bulbs (W 5 W)
insert a thin screwdriver into one of
the lens' exterior holes,
push it outwards to unclip,
remove the lens,
p u l l t h e b u l b a n d r e p l a c e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r .
Page 134 of 204
122
PRACTICAL INFORMATION
Interior lighting
Interior lamps (1/W 5 W)
D e t a c h t h e c o v e r o f t h e i n t e r i o r l a m p 1
with a thin screwdriver, close to the but-
t o n , t o a c c e s s t h e f a u l t y b u l b .
Map reading lamps (2/W 5 W)
D e t a c h t h e c o v e r o f t h e i n t e r i o r l a m p . T o
access the faulty bulb, detach the par-
tition for the reading lamp 2 concerned,
a s n e c e s s a r y . Footwell lamps (W 5 W)
Unclip the cover using a thin screwdriver
t o a c c e s s t h e f a u l t y b u l b .
Boot lamps (W 5 W)
D e t a c h t h e u n i t b y p u s h i n g i t r e a r w a r d s . Torch (Krypton 3.6 V)
O p e n t h e t a b .
P u s h w i t h a fl a t s c r e w d r i v e r i n t h e
hole under the tab and recover the
b u l b u n i t .
Open the bulb unit fully to change
t h e b u l b .
Exterior mirror lamps (W 5 W)
Unclip the cover using a thin screwdriver
t o a c c e s s t h e f a u l t y b u l b .
Page 136 of 204
124
PRACTICAL INFORMATION
Fascia fuses
The fuse box is located in the glove
b o x .
Access to the fuses
refer to the paragraph "Access to
t h e t o o l s " . Fuse tables
Fuse N° Rating Functions
FH36 5 A T r a i l e r r e l a y u n i t .
FH37 15 A T r a i l e r a c c e s s o r i e s s o c k e t s u p p l y .
FH38 20 A N a v i g a t i o n .
FH39 - N o t u s e d .
FH40 30 A T r a i l e r r e l a y u n i t .
Fuse N° Rating Functions
F1 15 A R e a r w i p e r .
F2 - N o t u s e d .
F3 5 A A i r b a g s a n d p r e t e n s i o n e r s c o n t r o l u n i t .
F4 10 A Steering wheel angle sensor, air conditioning,
c l u t c h s w i t c h , p a r t i c l e fi l t e r p u m p , d i a g n o s t i c
s o c k e t , a i r fl o w m e t e r .
F5 30 A Electric windows panel, passenger's electric
w i n d o w c o n t r o l , f r o n t e l e c t r i c w i n d o w s m o t o r .
F6 30 A Rear electric windows motor and driver's electric
w i n d o w m o t o r .
F7 5 A Courtesy and front map reading lights, glove box
l i g h t i n g , t o r c h , r e a r r e a d i n g l i g h t s .
Page 145 of 204
i!
132
PRACTICAL INFORMATION
TOWING THE VEHICLE
Access to the tools Towing your vehicle
On the front bumper, unclip the cov-
e r b y p r e s s i n g a t t h e b o t t o m .
S c r e w t h e t o w i n g e y e i n f u l l y .
I n s t a l l t h e t o w b a r .
Switch on the hazard warning lights
o n t h e t o w e d v e h i c l e .
P l a c e t h e g e a r l e v e r i n n e u t r a l .
On the rear bumper, unclip the cover
b y p r e s s i n g a t t h e b o t t o m .
S c r e w t h e t o w i n g e y e i n f u l l y .
I n s t a l l t h e t o w b a r .
Switch on the hazard warning lights
o n t h e t o w e d v e h i c l e .
Towing another vehicle
The towing eye is installed under the
b o o t fl o o r .
To gain access to it:
open the boot,
r e m o v e t h e m o v a b l e b o o t fl o o r ,
lift up the boot carpet,
remove the towing eye from the tool
h o l d e r . When towing with all four wheels
on the ground, always use a tow-
b a r .
When towing with only two wheels
on the ground, always use profes-
s i o n a l l i f t i n g e q u i p m e n t .
When towing with the engine off,
there is no longer any braking or
s t e e r i n g a s s i s t a n c e .
Failure to observe this special con-
dition could result in damage to
certain braking components and
the absence of braking assistance
t h e n e x t t i m e t h e e n g i n e i s s t a r t e d .
Procedure for having your vehicle towed
or for towing another vehicle using a re-
m o v a b l e t o w i n g e y e .
Page 146 of 204
i
i
133
PRACTICAL INFORMATION
TOWING A TRAILER, A CARAVAN, ETC.
Your vehicle is primarily designed for
transporting people and luggage, but it
m a y a l s o b e u s e d f o r t o w i n g a t r a i l e r . Driving advice
The maximum towing load on a long
slope depends on the gradient and the
a m b i e n t t e m p e r a t u r e .
In all cases, pay attention to the coolant
t e m p e r a t u r e .
Side wind
Take into account the increased
s e n s i t i v i t y t o s i d e w i n d .
Cooling
Towing a trailer on a slope increases
t h e t e m p e r a t u r e o f t h e c o o l a n t .
As the fan is electrically controlled, its
cooling capacity is not dependent on
t h e e n g i n e s p e e d .
To lower the engine speed, reduce
y o u r s p e e d . Braking
Towing a trailer increases the braking
d i s t a n c e .
Tyres
Check the tyre pressures of the tow-
ing vehicle and of the trailer, observ-
i n g t h e r e c o m m e n d e d p r e s s u r e s .
Lighting
Check the electrical signalling on
t h e t r a i l e r .
The rear parking assistance will
be deactivated automatically if an
o r i g i n a l C I T R O Ë N t o w b a r i s u s e d .
If the warning lamp and
the STOP warning lamp
come on, stop the vehicle
and switch off the engine
a s s o o n a s p o s s i b l e .
Towbar suited to the attachment of a
trailer or caravan with additional signal-
l i n g a n d l i g h t i n g .
Distribution of loads
D i s t r i b u t e t h e l o a d i n t h e t r a i l e r s o
that the heaviest items are as close
as possible to the axle and the nose
weight approaches the maximum
p e r m i t t e d w i t h o u t e x c e e d i n g i t .
Air density decreases with altitude, thus
r e d u c i n g e n g i n e p e r f o r m a n c e . A b o v e
1 000 metres, the maximum towing load
must be reduced by 10 % and so on for
e v e r y 1 0 0 0 m e t r e s o f a l t i t u d e .
R e f e r t o t h e " T e c h n i c a l D a t a " s e c t i o n f o r
details of the weights and towing loads
w h i c h a p p l y t o y o u r v e h i c l e .
D r i v i n g w i t h a t r a i l e r s u b j e c t s t h e t o w i n g
v e h i c l e t o m o r e s i g n i fi c a n t s t r e s s a n d i t s
d r i v e r m u s t b e p a r t i c u l a r l y c a r e f u l .
We recommend the use of genuine
CITROËN towbars and their har-
nesses that have been tested and
approved from the design stage
o f y o u r v e h i c l e , a n d t h a t t h e fi t -
ting of the towbar is entrusted to a
C I T R O Ë N d e a l e r .
I f t h e t r a i l e r i s n o t fi t t e d b y a
CITROËN dealer, it is imperative
t h a t i t i s fi t t e d u s i n g t h e e l e c t r i c a l
p r e - e q u i p m e n t i n s t a l l e d a t t h e r e a r
of the vehicle, in accordance with
t h e m a n u f a c t u r e r ' s i n s t r u c t i o n s .