ignition Citroen C3 RHD 2013 2.G User Guide

1
Monitoring
35
System which informs the driver when the next ser vice is due, in accordance with themanufacturer's servicing schedule.
The point at which the ser vice is due is
calculated from the last indicator zero reset. Itis determined by two parameters:


- the distance travelled,

- the time elapsed since the last ser vice.
Between 600 miles (1 000 km)and 1800 miles (3 000 km) remainbefore the next service is due
For a few seconds after the ignition is switched
on, the spanner symbolising the ser vice
operations comes on. The distance recorder
display line indicates the distance remainingbefore the next service is due.
Example:
1 700 miles (2 800 km) remain before the next service is due.


Less than 600 miles (1 000 km)remain before the next service is due
Example:560 miles (900 km) remain before
t
he next service is due.
For a few seconds after the ignition is switched on, the display indicates:
For a
few seconds after the ignition is switched
on, the screen indicates:
A few seconds after the i
gnition is switched on, the spanner goes off; the distance recorder fresumes its normal operation. The screen thenindicates the total and trip distances.
A few seconds after the ignition is switched on, the distance recorder resumes its normaloperation. The spanner remains on
toindicate that a service must be carried out soon.


More than 1800 miles (3000 km)remain before the next service is due

When the ignition is switched on, no ser vice
information appears in the screen.
Service indicator

Monitoring
36
For a few seconds after the ignition is switched on,the spanner flashes to indicate that the service must be carried out as soon as possible.Example:the ser vice is overdue by 180 miles (300 km).
For a few seconds after the ignition is switched
on, the display indicates:

A few seconds after the ignition is switched
on, the distance recorder resumes its normaloperation. The spanner remains on.
Service indicator zero reset

After each ser vice, the ser vice indicator mustbe reset to zero.
The procedure for resetting to zero is as
follows: ) switch off the ignition,)
press and hold the trip distance recorder
zero reset button,) switch on the ignition; the distance recorder display begins a countdown, )
when the display indicates "=0", release
the button; the spanner disappears.
Retrieving the serviceinformation

You can access the ser vice information at anytime. )Press the trip distance recorder zero reset button.
The ser vice information is displayed for a
few seconds, then disappears.
The distance remaining may be weighted by the time factor, dependingon the driver's driving habits. Therefore, the spanner may also comeon if you have exceeded the period since the last service, indicated in the MAINTENANCE AND WARR ANT YGUIDE.


Following this operation, if you wish todisconnect the battery, lock the vehicleand wait at least five minutes for thezero reset to be taken into account.
Service overdue

1
Monitoring
37
Engine oil level indicator

This information is displayed for a few seconds
when the ignition is switched on, after theservice information.
Oil level correct
This is indicated by the flashing of "OIL", linked with the ser vice warning lamp, accompanied
by an audible signal and a message in the
multifunction screen.
If the low oil level is confirmed by a check using
the dipstick, the level must be topped up to prevent damage to the engine.
Oil level low

This is indicated by the flashing of "OIL--" . Contact a CITROËN dealer or a qualified
workshop.

Oil level indicator fault

Dipstick


There are 2 marks on the
dipstick:


- A= max; never exceed this
level (risk of damage to the engine), -B= min; top up the level via
the oil filler cap, using thegrade of oil suited to your engine. R
efer to the "Checks" section to locate the
dipstick and the oil filler cap on your engine.

The level shown will only be correctif the vehicle is on level ground and
the engine has been off for more than 30 minutes.

Monitoring
38
System which measures the total distance
travelled by the vehicle during its life.
The total and trip distances are displa
yed for
thirty seconds when the ignition is switched off,
when the driver's door is opened and when the
v
ehicle is locked or unlocked.
) With the ignition on, press the button until
zeros appear.



Tr ip distance recorder
System which measures a distance travelledduring a day or other period since it was reset
to zero by the driver.
Clock

Adjusting the time - Choice of units
To a djust the time of the clock and choose the
units used by the screen, use the right-hand
button on the instrument panel, carrying out the
operations in the following order: )press the button for more than two seconds:
the minutes flash, )press the button to increase the minutes, )press the button for more than two seconds:
the hours flash, )press the button to increase the hours,)press the button for more than two seconds:
24H or 12H is displayed,)press the button to select 24H or 12H, )press the button for more than two seconds: °C or °F is displayed,)press the button to select °C or °F,)press the button for more than two seconds
to complete the adjustments.
After approximately 30 seconds without anyaction, the screen returns to the normal display.


To c o nform to legislation in the country you are crossing, change the units of distance (miles or km) via theconfiguration menu.

Monitoring
42
Tr ip computer, a few definitions
Range
(miles or km)The distance which can still be
travelled with the fuel remainingin the tank. Related to theaverage fuel consumption over
the last few miles (kilometres)
travelled.
Current fuel consumption
(mpg or l/100 km or km/l) Calculated over the last few seconds.


Average fuel consumption
(mpg or l/100 km or km/l)
Calculated since the last trip
computer reset.
Average speed
(mph or km/h)Calculated since the last trip computer reset.

Distance travelled
(miles or km)
Calculated since the last tripcomputer reset.

When the ran
ge falls below 20 miles (30 km),
dashes are displayed. After filling with at least 5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (10 0 km).


Distance remaining to destination
(miles or km)
This is the distance remaining to be
travelled to the final destination. Itcan be entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.

Stop & Start time counter
(minutes / seconds or hours /
minutes) If your vehicle is fitted with Stop &Start, a time counter calculates the
time spent in STOP mode during ajourney. It resets to zero every time the
ignition is switched on with the key.



If dashes are displayed continuously while driving in place of the digits, contact a CITROËN dealer or a qualified workshop.


This value may vary following a changein the style of driving or the relief,resulting in a significant change in thecurrent fuel consumption.
This function is only displayed from 20 mph (30 km/h).

Comfort
64





Mirrors
Each fitted with an adjustable mirror glasspermitting the lateral rearward vision necessary for overtaking or parking. They can also befolded for parking in confined spaces.

Adjustment
)
Move control Ato the right or to the left to select the corresponding mirror. )
Move control Bin all four directions toadjust. )
Return control Ato the central position.



Folding
)From outside: lock the vehicle using the
remote control or the key. )From inside: with the ignition on, with the control A
in the central position, pull itdownwards.


Unfolding
)From outside: unlock the vehicle using theremote control or the key. )From inside: with the ignition on, with the control A
in the central position, pull itdownwards.Demisting - Defrosting
If your vehicle is fitted with heated mirrors, the
demisting-defrosting operates with the engine running, by switching on the heated rear screen (refer to the "Rear screen demist-defrost"page).
Door mirrors
The objects obser ved are, in reality, closer than they appear.Take this into account in order to correctly judge the distance of vehicles
approaching from behind.


If the mirrors are folded using control A ,they will not unfold when the vehicle is unlocked. Pull again on control A.

The folding and unfolding of the door mirrors using the remote control can bedeactivated by a CITROËN dealer or a qualified workshop.
Never fold or unfold the electric foldingmirrors manually.

Access
68
Anti-theft protection

Electronic engine immobiliser

The key contains an electronic chip which has
a special code. When the ignition is switched
on, this code must be recognised in order for
startin
g to be possible.
This electronic engine immobiliser locks theengine management system a few minutes
after the ignition is switched off and prevents
starting of the engine by anyone who does not have the key.
In the event o
f a fault, you are
informed by illumination of this
warning lamp, an audible signal and
a message in the screen.
Ignition switch


- Position 1: Stop

- Position 2: Ignition

- Position 3: Starting


Starting the vehicle
)Inser t the key in the ignition switch.
The system recognises the star ting code. )Turn the key fully towards the dashboard toposition 3 (Starting).)When the engine star ts, release the key.
Locating your vehicle
) Press the closed padlock to locate your locked vehicle in acar park.
This is indicated b
y lighting of the cour tesylamps and flashing of the direction indicators
for a few seconds.
In this case,
your vehicle will not start; contact
a CITROËN dealer as soon as possible.
Keep safely the label attached to the keys given
to you on acquisition of the vehicle.

4
Access
69
Remote control problem
Reinitialisation
) Switch off the ignition.)
Turn the key to position 2 (Ignition on)
. )
Press the closed padlock immediately for a
few seconds.) Switch off the ignition and remove the key
from the ignition switch.
The remote control is full
y operational again.


Changing the battery

Battery ref.: CR1620 / 3 volts.
If the batter
y is flat, you are informed
by illumination of this warning lamp,an audible signal and a message in
the multifunction screen.
) Unclip the casing using a coin at the notch. )
Slide the flat battery out of its location.)
Slide the new battery into its location
observing the original direction. ) Clip the casing.)
Reinitialise the remote control.




Switching the vehicle off


Key reminder

If the key is left in the ignition switch, anaudible signal sounds when the driver's door is opened.


Do not attach any heavy objects to the key as this could weigh down on it whenin the ignition switch and cause a fault. Followin
g disconnection of the vehicle battery,replacement of the remote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your
v
ehicle.) First of all, use the key in the lock to unlock
or lock your vehicle.) Then, reinitialise the remote control.
If the problem persists, contact a CITROËNdealer as soon as possible.
)Immobilise the vehicle. )Turn the key fully towards you toposition 1 (Stop).)Remove the key from the ignition switch.

Access
70
Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification documents and if possible the key code label.The CITROËN dealer will be able to look up the key code and the transponder code required to order a new key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it. Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from working and the remote control would haveto be reinitialised. No remote control can operate when the key is in the ignition switch, even when the ignitionis switched off, except for reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compar tment by the emergency ser vices more difficult in an emergency. As a safety precaution, never leave children alone in the vehicle, except for a very shor t period.In all cases, it is essential to remove the key from the ignition switch when leaving thevehicle.
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could causemalfunctions.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure that only your keys can be used to open and star t the vehicle.
Do not throw the remote controlbatteries away, they contain metals which are harmful to the environment.
Take them to an approved collectionpoint.

4
Access
71





Alarm

Do not make any modifications tothe alarm system, this could cause malfunctions.

If an opening - door or boot - is not closed fully, the vehicle is not locked, but the exterior perimeter protectionwill be activated after 45 seconds at the same time as the interior volumetric protection. S
ystem which protects and provides a deterrent against the theft of your vehicle. It provides two types of protection, exterior and interior, as well as a self-protection function.


Exterior perimeter protection

The system detects opening of the vehicle.
The alarm is triggered if anyone tries to enter
the vehicle by forcing a door, the boot or thebonnet.

Interior volumetric protection
The system detects any variation in the volume
in the passenger compar tment.
The alarm is tri
ggered if anyone breaks a
window or moves inside the vehicle.
If you wish to leave a pet in the vehicle or a
window partially open, deactivate the interior
volumetric protection.


Self-protection function

The system detects the putting out of ser vice of
its components.
The alarm is triggered if anyone tries to put
the wires of the siren, the central control or the
batter
y out of ser vice.
Locking the vehicle with full
alarm
Activation
) Switch off the ignition and get out of the
vehicle. ) Lock or deadlock the vehicle using the locking button on the remote control.
The alarm is activated; the indicator lamp inbutton A
flashes once per second.
The exterior perimeter protection is activated,
5 seconds after the locking button on theremote control is pressed.
The interior volumetric protection is activated,
45 seconds a
fter the locking button on the remote control is pressed.

Deactivation
)
Unlock the vehicle using the unlockingbutton on the remote control.
The alarm is deactivated; the indicator lamp in button Agoes off.