suspension Citroen C4 2005 2.G User Guide

Downloaded from www.Manualslib.com manuals search engine 130
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine suspension
14,5 ± 0,4
22,2 ± 0,2
32,2 ± 0,2
44,5 ± 0,4
55 ± 0,5
65 ± 0,5
74,5 ± 0,4
86,5 ± 0,6
92,2 ± 0,2
105 ± 0,5
112,2 ± 0,2
124,5 ± 0,4
134,5 ± 0,4
144,5 ± 0,4
Engine: WJY
B1BP1U5P
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 130

Downloaded from www.Manualslib.com manuals search engine 134
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine suspension
14,5 ± 0,4
22,2 ± 0,2
32,2 ± 0,2
46,1 ± 0,6
54,5 ± 0,5
64,5 ± 0,5
74,5 ± 0,4
86,5 ± 0,6
92,2 ± 0,2
105 ± 0,5
112,2 ± 0,2
124,5 ± 0,4
134,5 ± 0,4
Engines: RHY - RHZ
B1BP1YDP
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 134

Downloaded from www.Manualslib.com manuals search engine 137
ENGINE
Lower engine support
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
1 5,5 ± 0,5
2 6 ± 0,5
3
4 5,5 ± 0,5
5
13 6 ± 0,6
14
1 ± 0,1
15
16 5,5 ± 0,5
17 4 ± 0,4
18 6 ± 0,6
B1BP35HD
Suspensions for engine/gearbox assembly
Engine: RHR
RH engine support LH engine support
B1BP35KD
B1BP35JD
6 3 ± 0,3
7 6,5 ± 0,6
8 2 ± 0,2
9 4,5 ± 0,4
10 3 ± 0,3
11 5,5 ± 0,5
12 5 ± 0,5
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 137

Downloaded from www.Manualslib.com manuals search engine 361
AXLES
SUSPENSION
STEERING
AXLE GEOMETRY
Conditions for checking and adjusting
Vehicle heights at reference height
Rear height Front height
L2 L1
Tools : [1] Gauge for measuring the the wheel radius, 4 bolts: 4300-T.
Tyres inflated to correct pressures. Vehicle at reference height.
Steering rack locked at mid point
(see corresponding operation).
H1 = R1 - L1
H1 = Measurement between the measuring zone underneath the front
subframe and the ground.
R1 = Front wheel radius under load.
L1 =Distance between the wheel axis and the measuring zone underneath
the front subframe.H2 = R2 + L2
H2 = Measurement between the measuring zone underneath the rear sill
and the ground.
R2 =Rear wheel radius under load.
L2 =Distance between the wheel axis and the measuring zone underneath
the rear sill.
E1AP0F3D
C4
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 361

Downloaded from www.Manualslib.com manuals search engine AXLE GEOMETRY
B3CP097D
Measuring front height Measuring rear height
[1]Gauge for measuring the the wheel radius, 4 bolts: 4300-T
Z1= Measuring zone underneath the front subframe.Z2= Measuring zone underneath the rear sill.
Measure the radius of the front wheel R1 - Calculate dimension H1 = R1–L1Measure the radius of the rear wheel R2 - Calculate dimension H2 = R2+ 2
Value at reference All types
CRD vehicles (*)Value at reference All types (except entreprise CRD
height (except CRD) (*) height entreprise et CRD) (*) vehicles vehicle (*)
(+ 10 - 8 mm) L1 = 144 mm L1 = 124 mm (+ 12 - 10 mm) L2 = 68 mm L2 = 48 mm L2 = 88 mm
(*) = CRD: Difficult road conditions: definition for a type of vehicle with axles and suspension designed for driving on rough roads.
Compress the suspension to obtain the calculated values.
The height difference between the two axle dimensions should be less than 10 mm.
362
AXLES
SUSPENSION
STEERING
C4
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 362

Downloaded from www.Manualslib.com manuals search engine 363
AXLES
SUSPENSION
STEERING
C4
363
A < B = Positive figure: + = TOE-IN
A > B = Negative figure: - = TOE-OUTNOTE
AXLE GEOMETRY
Front axle
Dissymmetry of lower castor 0° 30'.
Dissymmetry of lower camber 0° 30'.
Distribute symmetrically, LH / RH wheel, the total tracking value.
EnginesET3J4 - TU5JP EW10
DW10BTED4EW10DV6
DV6 DV6 DW10BTED4
Tyres195/65 R 15 205/55 R 16 205/50 R 17
Camber
(± 0° 30’)0°
Castor
(± 0° 30’)No adjustable 5° 5° 09’ 5° 12’
Pivot angle
(± 0° 30’)11° 41’
Tracking Adjustable- 2,5 ± 1 mm
- 0° 23’ ± 0° 09’ - 0° 21’ ± 0° 09’ - 0° 20’ ± 0° 08’
NOTE:Front of the vehicle (following arrow).B3CP02UC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 363

Downloaded from www.Manualslib.com manuals search engine AXLES
SUSPENSION
STEERING
C4
A < B = Positive figure: + = TOE-IN
A > B = Negative figure: - = TOE-OUTNOTE
AXLE GEOMETRY
Rear axle
Dissymmetry of lower camber 0° 30'.
EnginesET3J4 - TU5JP EW10DV6 EW10DV6
DV6 DW10BTED4 DW10BTED4
Tyres195/65 R 15 205/55 R 16 205/50 R 17
Camber
(± 0° 30’)No adjustable 1° 45’
Push angle
(± 0° 06’)0°
Tracking Adjustable6,5 ± 1 mm
0° 59’ ± 0° 09’ 0° 55’ ± 0° 09’ 0° 52’ ± 0° 08’
NOTE: Front of the vehicle (following arrow).B3CP02UC
364
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 364

Downloaded from www.Manualslib.com manuals search engine 365
AXLES
SUSPENSION
STEERING
C4TIGHTENING TORQUES: FRONT AXLE
Tightening torques (m.daN).
(1)Nut fixing suspension leg on body: 6,9 ± 0,6
(2) Nut fixing upper damper cup: 6,9 ± 0,6
(3)Upper fixing of anti-roll bar rod: 3,6 ± 0,3
(4)Lower fixing of anti-roll bar rod: 3,6 ± 0,3
(5)Nut fixing pivot lower ball-joint: 4,2 ± 0,4
(6)Fixing of pivot lower ball-joint on pivot: 23 ± 2,3
(7)Hub nut: 32,5 ± 2,6
(8)Steering ball-joint on pivot: 3,5 ± 0,3
(9)Fixing of suspension leg on pivot: 9 ± 0,9
Anti-roll bars
Engines Diameter (mm) Colour
ET3J4 TU5JP - EW10A/J4
DV621.5 Pink
EW10J4S DW10BTED4 22 White
B3BP18ZP
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 365

Downloaded from www.Manualslib.com manuals search engine 366
AXLES
SUSPENSION
STEERING
C4TIGHTENING TORQUES: FRONT AXLE
Tightening torques (m.daN).
(10)Fixing of subframe extension on body: 5,1 ± 1,2
(11)Fixing of tie-rod on body: 1,8 ± 0,4
(12)Tie-rod screw on front subframe: 9,8 ± 0,9
(13) Fixing of anti-roll bar bearing on subframe: 10,4 ± 1
(14)Fixing of lower suspension arm on subframe: 11,1 ± 1
(15)Fixing of subframe extension on body: 8,5 ± 0,8
(16)Fixing of steering mechanism on subframe: 8 ± 0,8
B3CP08TD
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 366

Downloaded from www.Manualslib.com manuals search engine 367
AXLES
SUSPENSION
STEERING
C4TIGHTENING TORQUES: REAR AXLE
Tightening torques (m.daN).
(17)Damper upper fixing: 5,8 ± 0,5
(18)Fixing of yoke on rear axle: 7,6 ± 0,7
(19)Fixing of rear axle yoke on body: 6,2 ± 0,6
(20)Stub axle bearing nut
- Pre-tightening : 9 ± 0,9
- Angular tightening: 29° ± 5°
(21) Damper lower fixing: 6 ± 0,6
(22)Fixing of stub axle carrier on rear axle: 6,3 ± 0,6
Anti-roll bars
Diameter (mm)Thickness of the
Engines
(interior x exterior)crossmember panel
(mm)
ET3J4 TU5JP4 EW10A/J4
DV621x27 5
EW10J4S 24x30
6
DW10BTED4 21x27
B3DP0BDD
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 367