engine Citroen C4 2008 1.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4, Model: Citroen C4 2008 1.GPages: 257, PDF Size: 8.06 MB
Page 132 of 257
121
X
M A I N T E N A N C E
Windscreen and rear screen w a s h e r fl u i d
For best results as well as for your safety, use only CITROËN approved products which protect at temperatures as low as -25 °C to -30 °C.
I t i s e s s e n t i a l t o h a v e s u f fi c i e n t s c r e e n w a s h fl u i d i f y o u r v e h i c l e i s equipped with Xenon headlamps.
T o c h e c k t h e l e v e l , p l a c e a fi n g e r on aperture A before removing the cap.
Capacity: 3.5 litres.
Capacity with headlamp washers: 6.5 litres.
B r a k e fl u i d
T h e s y n t h e t i c fl u i d n o t o n l y g i v e s protection against corrosion but also ensures correct functioning of the braking system in all environmental conditions, therefore you should only use the synthetic product recommended by the CITROËN only use the synthetic product product
n e t w o r k . ( t h i s fl u i d m u s t b e r e p l a c e d every two years).
These important requirements are detailed in your vehicle’s Maintenance Guide.
Quality: See "Maintenance Guide".
When working under the bonnet, when the engine is hot (even stopped and the ignition switched off), the cooling fan coul d operate at any time.
B r a k e fl u i d r e s e r v o i r
Check and top up at regular intervals.
T h e fl u i d l e v e l m u s t b e s i t u a t e d w i t h i n the max and min marks visible on the reservoir.
If the warning lamp comes on when driving, stop as quickly as possible and contact a CITROËN dealer.driving, stop as quickly as possible quickly
Page 133 of 257
122
X
M A I N T E N A N C E
Protection cover
HDi 135 and 140 engines
Remove the protection cover by fi r s t u n c l i p p i n g p o i n t 1, then 3 and4 . D e t a c h p o i n t 2 by pulling towards you, then lift.
To reposition the protection cover, attach point 2 fi r s t . L o w e r t h e c o v e r , keeping it centred. Clip points 1 and4, pushing vertically and slightly rearwards. Clip point 3 pushing down vertically.
HDi engines are of a highly technical nature.
A l l m a i n t e n a n c e a n d r e p a i r s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s which only your CITROËN Dealer can guarantee. A l l m a i n t e n a n c e a n d r e p a i r s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s A l l m a i n t e n a n c e a n d r e p a i r s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s
Bleeding of water from the diesel f u e l fi l t e r
To be bled on a regular basis (at every oil change).
To evacuate the water, slacken the bleed screw or the water in diesel fuel sensor, which is located at the b a s e o f t h e fi l t e r , u n t i l w a t e r c e a s e s t o fl o w o u t .
Then retighten the bleed screw or the water in diesel fuel sensor.
DIESEL INJECTION EQUIPMENTWear of brake discs, brake pads and brake drums
The rate of wear of the brake pads depends on the use of your vehicle (urban use, frequent stops), and on your style of driving or the type of journey.
For information on checking the discs and drums for wear, contact a CITROËN dealer.
After washing the vehicle, brake progressively to dry out the brake linings.
Page 134 of 257
122
X
M A I N T E N A N C E
Protection cover
HDi 135 and 140 engines
Remove the protection cover by fi r s t u n c l i p p i n g p o i n t 1, then 3 and4 . D e t a c h p o i n t 2 by pulling towards you, then lift.
To reposition the protection cover, attach point 2 fi r s t . L o w e r t h e c o v e r , keeping it centred. Clip points 1 and4, pushing vertically and slightly rearwards. Clip point 3 pushing down vertically.
HDi engines are of a highly technical nature.
A l l m a i n t e n a n c e a n d r e p a i r s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s which only your CITROËN Dealer can guarantee. A l l m a i n t e n a n c e a n d r e p a i r s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s A l l m a i n t e n a n c e a n d r e p a i r s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s
Bleeding of water from the diesel f u e l fi l t e r
To be bled on a regular basis (at every oil change).
To evacuate the water, slacken the bleed screw or the water in diesel fuel sensor, which is located at the b a s e o f t h e fi l t e r , u n t i l w a t e r c e a s e s t o fl o w o u t .
Then retighten the bleed screw or the water in diesel fuel sensor.
DIESEL INJECTION EQUIPMENTWear of brake discs, brake pads and brake drums
The rate of wear of the brake pads depends on the use of your vehicle (urban use, frequent stops), and on your style of driving or the type of journey.
For information on checking the discs and drums for wear, contact a CITROËN dealer.
After washing the vehicle, brake progressively to dry out the brake linings.
Page 135 of 257
123
X
M A I N T E N A N C E
HDi 135 and 140 engines
D e t a c h t h e p r o t e c t i o n c o v e r t o access the priming pump.
HDi engines are of a highly technical nature.
All maintenance and repairs r e q u i r e s p e c i fi c q u a l i fi c a t i o n s which only your CITROËN r e q u i r e s p e c i fi c q u a l i fi c a t i o n s r e q u i r e s p e c i fi c q u a l i fi c a t i o n s
Dealer can guarantee.
HDi 90 and 110 engines
D e t a c h t h e p r o t e c t i o n c o v e r t o access the priming pump.
In the event of running out of fuel:
- A f t e r fi l l i n g ( 5 l i t r e s m i n i m u m ) , o p -erate the manual priming pump until some resistance is felt.
- Operate the starter motor while depressing the accelerator pedal slightly until the engine starts.
I f t h e e n g i n e f a i l s t o s t a r t a t t h e fi r s t attempt, wait 15 seconds before try-ing again.
If the engine fails to start after sev-eral attempts, repeat the procedure from the beginning.
When the engine is idling, acceler-ate slightly to complete the bleeding of the circuit.
PRIMING THE DIESEL FUEL SYSTEM
Page 136 of 257
124
XI
P R A C T I C A L A D V I C E
If you have put in fuel that
is wrong for your vehicle,
it is essential to have the
tank drained before you
start the engine.
For petrol engines with catalytic
converter, use of unleaded fuel is
obligatory
T h e fi l l e r n e c k h a s a n a r r o w e r o r i fi c e
t o a d m i t o n l y p e t r o l fi l l e r n o z z l e s .
W h e n y o u a r e fi l l i n g y o u r f u e l
tank, do not persist after the third
cutoff; this could cause your ve-
hicle to malfunction.UNLEADED PETROL
DIESEL FUEL
P e t r o l e n g i n e s a r e d e s i g n e d t o r u n o n R O N 9 5 f u e l .
H o w e v e r , f o r b e t t e r v e h i c l e p e r f o r - m a n c e ( p e t r o l e n g i n e s ) , w e r e c o m - m e n d R O N 9 8 .
A l a b e l o n t h e i n s i d e o f t h e f u e l fi l l - e r fl a p i n d i c a t e s t h e a p p r o v e d f u e l q u a l i t y t y p e .
FUELBioFlex
Y o u r v e h i c l e h a s b e e n d e s i g n e d t o
o p e r a t e
equally o n u n l e a d e d p e t -
r o l ( 9 5 o r 9 8 ) o r o n b i o e t h a n o l ( i n
E u r o p e t h i s i s a m i x t u r e o f 8 5 %
e t h a n o l a n d 1 5 % u n l e a d e d p e t r o l ,
k n o w n a s E85 ) .
A l a b e l i n s i d e t h e f u e l fi l l e r fl a p i n d i -
c a t e s t h e f u e l s a u t h o r i s e d :
In winter conditions, starting f r o m c o l d m a y s e e m d i f fi c u l t . During periods of very cold weather we recommend the use of 95 or 98 unleaded petrol in preference to B85 so as to ensure optimum starting per-formance.
O t h e r t h a n t h e q u e s t i o n o f t h e t w o a u t h o r i s e d f u e l s , y o u r v e h i c l e i s u s e d i n t h e s a m e w a y a s a t r a d i t i o n a l p e t r o l v e h i c l e .
Page 158 of 257
146
XI
P R A C T I C A L A D V I C E
Towing with all wheels on the ground
T o w i n g r i n g fi x i n g s a r e p l a c e d a t t h e f r o n t a n d a t t h e r e a r o f t h e v e h i c l e .
T o a c c e s s t h e m :
- a t t h e f r o n t : p u s h o n t h e l e f t t o t i l t t h e c o v e r , t h e n r e m o v e i t .
- a t t h e r e a r : p u s h a t b o t t o m , t h e n p u l l o n t o p .
T h e c o v e r r e m a i n s a t t a c h e d t o t h e b u m p e r b y m e a n s o f a t a b , s o t h a t i t c a n n o t b e c o m e l o s t .
The ignition key should be in position "M" so as to retain steering.
U s e a b a r w i t h h o o k s t o a t t a c h o n t h e t o w i n g r i n g s .
Vehicles with manual transmission
F o r v e h i c l e s w i t h m a n u a l t r a n s m i s s i o n , t h e g e a r l e v e r m u s t b e i n n e u t r a l . F a i l - u r e t o o b s e r v e t h i s r e q u i r e m e n t c a n l e a d t o t h e f a i l u r e o f c e r t a i n b r a k i n g c o m - p o n e n t s a n d a l a c k o f b r a k i n g a s s i s t a n c e o n r e s t a r t i n g t h e e n g i n e .
If the engine is not running, the steering and braking systems will not be power-assisted.
If towing another vehicle, the latter should be free-wheeling (that is, gearbox in neutral).
Page 163 of 257
151
XII
T E C H N I C A L S P E C I F I C A T I O N S
( 1 ) A f t e r a n o i l c h a n g e w i t h fi l t e r change
Engine typeEngine oil capacity in litres (1)
1.4i 16V - 65 kW3.15
1.6i 16V - 80 kW3.35
1.6i 16V - 88 kW-
1.6i 16V - 110 kW-
1.6i 16V - 103 kW-
HDi 66 kW (90 hp)3.85
HDi 80 kW (110 hp)3.85
HDi 100 kW (135 hp)5.3
HDi 103 kW (140 hp)5.3
CAPACITIES
BVM: Manual gearbox.
BVMP: (6 speed) Electronic Gearbox System.
BVA: Automatic gearbox.
FAP: D i e s e l p a r t i c u l a t e fi l t e r s y s t e m (DPFS).
"Michelin Energy Saver": tyres with very low rolling resistance.This tyre equipment contributes to the protection of the environment and the reduction of your vehicle’s fuel consumption.
BioFlex: A v e h i c l e fi t t e d w i t h a B i o F l e x engine can operate equally on unleaded petrol (95/98) or on bioethanol (See "Fuel").
Observe your vehicle’s towing limits.
It is essential to comply with the max. Gross Trailer Weights and speed l i m i t s a s s p e c i fi e d b y l e g i s l a t i o n i n each country. For further information about the towing capacity of your vehicle and its max. authorised Gross Train Weight, contact your CITROËN dealer.Gross Train Weight, Gross Train
ENGINE TABLES LEGEND
Page 164 of 257
152
XII
T E C H N I C A L S P E C I F I C A T I O N S
WEIGHTS - PETROL5-door model
Engine type1.4i 16V BVM1.6i 16V BVM1.6i 16V BVA
1.6i 16V 120 ch BVM
1.6i 16V 120 ch BVA
1.6i 16V 150 ch BVM
1.6i 16V 140 ch BVA
1.6i 16V manual BioFlex
Fuel tank capacityApproximately 60 litres
Recommended fuelUnleaded petrol RON 95 - RON 98E85
Turning circle between walls (in metres)11.311.311.311.311.311.311.311.3-
F r e n c h fi s c a l r a t i n g67777997
Power (kW)658080888811010380-
Calculated maximum speed in km/h (mph) (in the highest gear)182194188----194-
Weights (kg)
Unladen weight1 1821 2001 2741 2201 2731 2761 2901 200-
Gross vehicle weight (GVW)1 7021 7321 7941 7311 7611 7631 7761 732-
Maximum rear axle weight850850850910910920910850-
Gross train weight (GTW)2 9022 9322 9943 0313 0313 1633 0762 932-
Gross trailer weight (with brakes) (within the Gross Train Weight limit)
10 to 12 % incline1 2001 2001 2001 3001 2701 4001 3001 200-
8 to 10 % incline1 2001 2001 2001 3001 2701 4001 3001 200-
Incline of up to 8 %1 5001 4001 4001 4001 3001 5001 3501 400-
Gross trailer weight (without brakes)628637674645670645680637-
Trailer nose weight6361626565707061-
Maximum roof bar load75
Page 165 of 257
153
XII
T E C H N I C A L S P E C I F I C A T I O N S
3-door model
Engine type1.4i 16V BVM1.6i 16V BVM1.6i 16V BVA
1.6i 16V 120 ch BVM
1.6i 16V 120 ch BVA
1.6i 16V 150 ch BVM
1.6i 16V manual BioFlex
Fuel tank capacityApproximately 60 litres
Recommended fuelUnleaded petrol RON 95 - RON 98E85
Turning circle between walls (in metres)11.311.311.311.311.311.311.3-
F r e n c h fi s c a l r a t i n g6777797
Power (kW)658080888811080-
Calculated maximum speed in km/h (mph) (in the highest gear)182194188---194-
Weights (kg)
Unladen weight1 1811 2001 2781 2171 2731 2711 200-
Gross vehicle weight (GVW)1 7011 7201 7981 7271 7571 7541 720-
Maximum rear axle weight850850850910900910850-
Gross train weight (GTW)2 9012 9202 9983 0273 0273 1542 920-
Gross trailer weight (with brakes) (within the Gross Train Weight limit)
10 to 12 % incline1 2001 2001 2001 3001 2701 4001 200-
8 to 10 % incline1 2001 2001 2001 3001 2701 4001 200-
Incline of up to 8 %1 5001 4001 4001 4001 3001 5001 400-
Gross trailer weight (without brakes)628637676645670645637-
Trailer nose weight63616365657061-
Maximum roof bar load75
WEIGHTS - PETROL
Page 166 of 257
154
XII
T E C H N I C A L S P E C I F I C A T I O N S
5-door model
Engine typeHDi 90 BVMHDi 90 FAP BVMHDi 110 BVMHDi 110 FAP BVMHDi 110 FAP BVMPHDi 135 FAP BVAHDi 140 FAP BVM
Fuel tank capacityApproximately 60 litres
Recommended fuelDiesel fuel
Turning circle between walls (in metres)11.311.311.311.311.31212
F r e n c h fi s c a l r a t i n g5566677
Power (kW)6666.2808080100103
Calculated maximum speed in km/h (mph) (in the highest gear)180180192192192206207
Weights (kg)
Unladen weight1 25712801 2701 2801 2931 4161 381
Gross vehicle weight (GVW)1 77718001 8001 8001 8001 8801 849
Maximum rear axle weight850850850850850850850
Gross train weight (GTW)3 07731003 1003 1003 1003 3503 449
Gross trailer weight (with brakes) (within the Gross Train Weight limit)
10 to 12 % incline1 30013001 3001 3001 3001 5701 500
8 to 10 % incline1 30013001 3001 3001 3001 5701 500
Incline of up to 8 %1 30013001 3001 3001 3001 5701 800
Gross trailer weight (without brakes)666677672677675740728
Trailer nose weight66666666657073
Maximum roof bar load75
WEIGHTS - DIESEL