engine Citroen C4 2008 1.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C4, Model: Citroen C4 2008 1.GPages: 257, PDF Size: 8.06 MB
Page 111 of 257
1 0 1
IX
D R I V I N G
Neutral
If the vehicle is moving, do not select this position, even momentarily.
Reverse gear
Only engage reverse gear when the vehicle is stationary.
If the vehicle is moving at a very low speed, if reverse gear is requested (position R) this will be taken into account only when the vehicle comes to a halt.
The "foot on brake" warning lamp m a y fl a s h i n t h e i n s t r u m e n t p a n e l to remind you to brake.
If the vehicle is moving at a high speed, if reverse gear is requested the warning lamp "N" w i l l fl a s h a n d your vehicle will go automatically i n t o n e u t r a l . T o r e - e n g a g e a g e a r , you have only to return the gear lever to position A or M.
A sound signal indicates when reverse gear is engaged.
If parking assistance is deactivated, the sound signal for reverse gear engaged is absent.
The engine can only be started if the brake pedal is pressed and the gear lever is in position N.
The warning lamp "foot on b r a k e " fl a s h e s o n t h e d i s p l a y .
With the engine running, before accelerating away check the position engaged by looking at the lever grille or the rev counter : R, A or M.
If you are stationary with the engine running, take care to leave your gear selector in position N.
Sport option
Activation
Press on button S, situated on the lever grille.
The warning lamp "S" displays on the rev counter.
This option can be activated either in automatic mode or in manual mode.
Deactivation
Press again again on button S on the lever grille.
The warning lamp "S" disappears on the rev counter.
Note: the Sport option is deactivated whenever you switch off the ignition.
Automatic mode
Manual mode
- P u s h t h e l e v e r t o c h a n g e t o a higher gear.
- P u l l t h e l e v e r t o c h a n g e t o a l o w e r gear.
Page 112 of 257
1 0 2
IX
D R I V I N G
Starting the vehicle
- T o s t a r t t h e e n g i n e , t h e g e a r l e v e r has to be in position N.
- F u l l y d e p r e s s t h e b r a k e p e d a l .
- A c t i o n t h e s t a r t e r .
- W i t h t h e e n g i n e r u n n i n g , d e p e n d i n g on your preference place the lever on R, A or M.
- C h e c k t h e p o s i t i o n e n g a g e d o n t h e rev counter.
- R e l e a s e t h e h a n d b r a k e .
- R e l e a s e t h e b r a k e p e d a l a n d accelerate.
If the lever is not in position N, the warning lamp "N" fl a s h e s o n t h e r e v counter.
If the brake pedal is not pressed down, the warning lamp "Foot on brake" fl a s h e s i n t h e i n s t r u m e n t panel.
In both cases, the engine does not start; recommence the above procedure.
Note: If the vehicle has been stationary for a long time, or if you have pressed the brake pedal a number of times while stationary, it will be necessary to press the brake pedal hard down in order to authorise the engine to start.
Stopping the engine
Before switching the engine off, you can choose:
- t o l e a v e t h e v e h i c l e i n n e u t r a l ; f o r that, place the lever in position N,
- t o l e a v e t h e v e h i c l e w i t h a g e a r engaged (R, A or M); for that, place the lever in the position chosen. In this case, the vehicle cannot be moved.
In all cases, it is essential to apply the handbrake.
Before undertaking any operation in the engine compartment, make absolutely sure that the gearbox is in neutral and that the handbrake is on.
Do not hold the vehicle stationary using only the accelerator.
If you are stopped on an incline, use the handbrake to hold the vehicle.
Acceleration
To obtain optimum acceleration (for example to overtake another vehicle), you have only to press the pedal hard down to go beyond the e n d - o f - t r a v e l s w i t c h .
Page 114 of 257
IX
D R I V I N G
Manual mode
Position the gear lever in position M, then:
- p u s h t h e l e v e r t o e n g a g e a h i g h e r gear,
- p u l l t h e l e v e r t o c h a n g e d o w n .
Manual mode with controls behind the steering wheel
Place the gear lever in position M, and then the controls at the steering wheel will give you access to the six gears in forward drive.
To change gear:
- P r e s s b e h i n d t h e c o n t r o l "+" at the steering wheel to engage a higher gear.
- P r e s s b e h i n d t h e c o n t r o l "-" at the steering wheel to change down.
Observations:
When the vehicle is braking or reducing speed, the gearbox changes down automatically to a suitable gear.
In manual mode, it is not necessary to release the accelerator during changes of gear.
C h a n g e s o f g e a r a r e a c c e p t e d o n l y if consistent with engine speed.
Under heavy accelera-tion, a higher gear will only be engaged when the driver actions the gear lever or the controls at the steering wheel.
Note: These controls at the steering do not permit you to select neutral or reverse gear.
Page 118 of 257
1 0 7
IX
D R I V I N G
Drive
The gearbox always selects the gear best adapted to the following parameters:
- s t y l e o f d r i v i n g ,
- r o u t e p r o fi l e ,
- v e h i c l e l o a d .
In this way the gearbox operates in autoadaptive mode, without the need for your intervention.
For certain manoeuvres (for example overtaking), it is possible to ob tain maximum acceleration by pressing hard down on the accelerator pedal, which may trigger automatic changedown to a lower gear.
Note
During braking, the gearbox may kick down automatically in order to offer an effective engine brake.
If you rapidly lift your foot off the accelerator, the gearbox will guard your safety by not changing up again.
Sequential forward drive
Selector position for manual gear changing.
- S e l e c t o r a t M.
- P u s h t h e s e l e c t o r t o w a r d s t h e s i g n "+" to change up a gear.
- P u l l t h e s e l e c t o r t o w a r d s t h e s i g n "-" to change down a gear.
Note: Passage from one gear to another is only possible when vehicle speed and engine speed permit.
The Sport and Snow programmes are not operative in sequential mode.
The change from position D (drive in automatic mode) to position M (drive in sequential mode) or vice versa may be effected at any time.
Page 120 of 257
1 0 9
IX
D R I V I N G
Park - N e v e r s e l e c t p o s i t i o n Nif the vehicle is moving.
- N e v e r s e l e c t p o s i t i o n s Por Ror if the vehicle is not completely stationary.
If, while the vehicle is moving, position N is engaged inadvertently, let the engine idle before engaging position D or M or.
Do not engage until the vehicle is completely stationary.
To avoid any movement of the vehicle when parked, select positionP a n d a p p l y t h e h a n d b r a k e fi r m l y . C h e c k t h a t t h e s e l e c t o r i s i n t h e Pposition to ensure that the driving wheels are locked.
Reverse gear
Do not engage until the vehicle is stationary, foot on brake. To avoid engine hesitation, do not accelerate immediately after the selection.
Neutral
Do not select this position, even momentarily, when the vehicle is in motion.
Page 123 of 257
1 1 2
IX
D R I V I N G
This driving assistance device allows you to select a maximum speed that you wish not to exceed. This has to b e a s p e e d g r e a t e r t h a n 3 0 k m / h ( a p p r o x . 2 0 m p h ) .
The speed limiter controls are located on the steering wheel.
Note: The information relating to the limiter is displayed in zone A of the instrument panel.
To select the function
Turn control 1 to position "LIM".
On selection of the function, the last speed memorised and the information "OFF" will appear:
To adjust the maximum speed
Provided the engine is running, you can adjust the memorised maximum speed, with short or long presses on:
- b u t t o n 4 to increase the memorised maximum speed,
- b u t t o n 2 to decrease the memorised maximum speed.
Note: successive presses modify the memorised speed in steps of 1 k m / h ( 1 m p h ) , a c o n t i n u o u s p r e s s i n s t e p s o f 5 k m / h ( 3 m p h ) .
Activation of the maximum speed
When the desired maximum speed is displayed, press button 3 to activate the limitation.
The information "OFF" then disappears from zone A.
While the function is active, pressing the accelerator pedal will not enable you to go beyond the programmed speed unless you press the pedal hard down past the tight spot (see "Temporary exceeding of the maximum speed").
Note: The vehicle speed may vary slightly from that memorised.
SPEED LIMITER
Page 128 of 257
117
X
M A I N T E N A N C E
PETROL ENGINES
T h e y g i v e a c c e s s f o r c h e c k i n g t h e l e v e l s o f t h e v a r i o u s fl u i d s a n d t h e r e p l a c e m e n t o f c e r t a i n i t e m s .
1. Power steering reservoir.
2. Screen and headlamp wash reservoir.
3. Engine coolant.
4. B r a k e fl u i d r e s e r v o i r .
5. Battery.
6. Fusebox.
7. A i r fi l t e r * .
8. Engine oil dipstick.
9. Topping up engine oil.
* D e p e n d i n g o n e n g i n e .
Page 129 of 257
118
X
M A I N T E N A N C E
DIESEL ENGINES
T h e y g i v e a c c e s s f o r c h e c k i n g t h e l e v e l s o f t h e v a r i o u s fl u i d s , t h e r e p l a c e m e n t o f c e r t a i n i t e m s a n d p r i m i n g t h e f u e l s y s t e m .
1. Power steering reservoir.
2. Screen and headlamp wash reservoir.
3. Engine coolant.
4. B r a k e fl u i d r e s e r v o i r .
5. Battery.
6. Fusebox.
7. A i r fi l t e r * .
8. Engine oil dipstick.
9. Topping up engine oil.
10. P r i m i n g p u m p * .
11. B l e e d s c r e w * .
* D e p e n d i n g o n e n g i n e .
Page 130 of 257
119
X
M A I N T E N A N C E
A i r fi l t e r
Follow the recommendations in the Maintenance Guide.
When working under the bonnet, when the engine is hot (even stopped and the ignition switched off), the cooling fan coul d operate at any time.
Check the engine oil level frequently between routine service visits, as well as prior to long journeys.
Engine coolant
The coolant level should be between the MAX and MINmarks on the header tank.
If the engine is hot, wait 15 minutes.
Quality: See "Maintenance Guide"
Never work on the cooling system if the engine is hot.
12 volt battery
See "Practical advice".
Engine oil
Check the oil level with the vehicle parked on level ground, after the engine has been switched off for at least fi f t e e n m i n u t e s .
Quality: See "Maintenance Guide"
B r a k e fl u i d
T h e fl u i d l e v e l m u s t b e situated within the MAX and MIN marks visible on the reservoir.
T h e s c r e e n w a s h fl u i d s h o u l d b e replaced periodically as it loses its effectiveness over time.
Quality: See "Maintenance Guide"
If the warning lamp comes on while you are driving, stop immediately and contact the CITROËN network.you are driving, stop immediately stop immediately
D u s t fi l t e r / o d o u r fi l t e r (active carbon)
See "Maintenance Guide"
Take out the oil dipstick.
The level must be between the MAX and MIN marks on the dipstick
It should never exceed the maximum mark.
Windscreen, rear screen and headlamp washer fl u i d
It is recommended that you use products approved by CITROËN.It is recommended that you hat you
S c r e e n w a s h fl u i d r e s e r v o i r : 3.5 litres.
Screen and headlamp wash reservoir: 6.5 litres.
S p e c i fi c a t i o n f o r t h e fl u i d
To ensure optimum cleaning and to a v o i d f r e e z i n g , t o p p i n g u p o r fi l l i n g of the reservoir must not be done with just water.
MAX
MIN
LEVELS
Page 131 of 257
120
X
M A I N T E N A N C E
Radiator - coolant
The coolant must only be checked or topped up if the power unit is cold.
Engine hot
As the cooling system is pressurised, wait for at least one hour after switching off the engine before intervening.
To avoid the risk of scalding, slacken the cap two turns to allow the pressure to escape. Once the pressure has fallen, remove the cap and top up the level.
Adding engine oil
Remove the dipstick before topping up. C h e c k t h e l e v e l a f t e r fi l l i n g .
It should never exceed the maximum mark.
Screw on the cap before closing the bonnet.
Quality: See "Maintenance Guide".
Topping up the cooling system
The coolant level should be between the MAX and MINmarks on the header tank.
Top up the level. If you have to add more than 1 litre, you should have the cooling system checked by CITROËN.the cooling the cooling
Make sure that the cap is on correctly
Note: The necessity to top up frequently would indicate a malfunction that should be checked at the earliest opportunity.
Note: On vehicles equipped with a p a r t i c l e fi l t e r , t h e c o o l i n g f a n m a y operate for some ten minutes after the engine has stopped.
LEVELS