Audio Citroen C4 2011 2.G Owner's Guide

248
1
25
6
3
4
06















PAIRING A TELEPHONE


For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio unit must be carried out with the vehicle stationary.


Activate the telephone's Bluetoothfunction and ensure that it is "shown to all" (telephone confi guration).
Pr
ess PHONE.
Select the name of the desired peripheral from the list of devices detected then select "Connect
" and confi rm.
The s
ystem offers to connect the
telephone:
-
in"Hands-free mode" (telephoneonly),
-
in " Audio" mode (streaming: playingmusic fi les on the telephone),
-
or "All
" (for selection of both
modes).
Select " OK
" and confi rm.
Select " Bluetooth functions
" and confi rm.
Select "Peripherals search" andconfi rm.
The list of peripherals detected is
displayed. Wait until the " Connect"button is available.
USING THE TELEPHONE

258
07
1a
1b
1c
1
2
RADIO
By alphabetical list
Pr
ess RADIOor LIST , select the station
of your choice and confi rm.
B
y automatic frequency search
Press or for the automatic searchfor a lower or higher radio frequency.
Or turn the thumb wheel on the steering
mounted control.
B
y manual frequency search
Pr
ess or to adjust the radiofrequency step by step.Pr
ess the button on the numericalkeypad to recall a preset station.
Or press then turn the thumb wheel at
the steering mounted controls.






SELECTING A STATION


The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode.
This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a fault with the audio system.

PRESETTING A STATION


Press one of the buttons on thenumerical keypad for 2 seconds topreset the current station.
An audible si
gnal confi rms that thestation has been preset. The qualit
y of reception is represented by this symbol.

261
08

CD, MP3 CD, USB PLAYER


The audio equipment will only play audio fi les with ".m4a, .m4b, .aac,.fl ac, .ogg and.mp3" fi le extensions and with a bit rate of between32 Kbps and 320 Kbps.
It also supports the VBR
(Variable Bit Rate) mode.
No other t
ype of fi le (.wma, .mp4, .m3u...) can be played.
The samplin
g rates supported are 11, 22, 44 and 48 KHz.

It is advisable to restrict
fi le names to 20 characters, without using of special characters (e.g.: " " ? ; ˘) to avoid any playing and displayingproblems.

In order to be able to pla
y a recorded CDR or CDRW, when recording
it is preferable to select the ISO 9660 level 1, 2 or Joliet standard.
If the disc is recorded in another format it ma
y not be played correctly.

It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible (4x maximum)for optimum sound quality.
In the particular case o
f a multi-session CD, the Joliet standard isrecommended.
INFORMATION AND ADVICE
The s
ystem supports USB mass storage or IPod
devices via the USB port (suitable cable not supplied).

Control of the peripheral device is with the audiosystem controls.

Other peripherals, not recognised on connection, must
be connected to the auxiliary socket using a Jack cable (not supplied).
In order to be read, a USB memor
y stick must be formatted FAT 16 or 32.

264
1
2
1
2
08






AUDIO STREAMING
vehicle's speakers.
Connect the telephone: see "USING THE TELEPHONE".
Select " Audio" or " All" profi le.
If pla
y does not start automatically, it may be necessary to start the audio playback from the telephone.
Control is from the peripheral device only.
Once connected in streaming mode, the telephone is considered to bea media source.
It is recommended that
you activate " Repeat" on the Bluetooth
peripheral.

MUSIC MEDIA PLAYERS


IPOD/IPHONE
Connect the IPod or IPhone to the USB port using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
The classifi cations available are those of the portable device
connected (artists/albums/genres/playlists/audiobooks/podcasts).
The de
fault classifi cation used is by artist. To modify the classifi cationused, return to the fi rst level of the menu then select the desired classifi cation (playlists for example) and confi rm to go down through
the menu to the desired track.

265
08
12
3
MUSIC MEDIA PLAYERS

USING THE AUXILIARY INPUT (AUX)
Cable not supplied
Connect the portable device (MP3 player…) to the auxiliary JACK
socket using an audio cable. Press MUSICto display the " MEDIA"menu.

Select "Activate/Deactivate AUX input"and confi rm.
First ad
just the volume of your portable
device (to a high level). Then adjust the
volume of your audio system.

Displa
y and management of the controls are via the portable device.

266
09
1
2
AUDIO SETTINGS
They are accessible by a long press on RADIOor MUSIC
or from the " FM/AMband " or "MEDIA " menus.
-"
Equalizer" (choice of 6 musical ambiences) r
-"Bass"
-
"Treble"
-"Loudness" (Activate/Deactivate)
- "
Distribution" (" Driver
", "rAll passengers
")
- " Le-Ri balanc
e
" (Left/Right)
- " Fr-Re balanc
e
" (Front/Rear)
-"Auto. Volume
" depending on road speed (Activate/Deactivate)
The audio settings ( Equalizer, rBass , Trebleand Loudness) are
different and independent for each sound source.
The settings
for distribution and balance are common to all sources. The distribution
(or spatialisation) of sound is an audio process that allows the audio quality to be adapted to the number of listeners in
the vehicle.

270
11 SCREEN MENU MAP

"SETUP" MENU

Audio settings


Equalizer
Following media source

Eject USB support

Read mode
Normal
Random
Random on all media
Repetition


Audio settings (same as
RADIO)

Activate/Deactivate AUX
input
None
Classical
Jazz
Rock
Techno
Vocal

Bass

Treble

Lou
dness

Distribution
Driver
All passengers

Le-Ri balance

Fr-Re balance

Auto. Volume



Update radio list
"MEDIA" MENU
Display configuration


Choose colour
Harmony
Cartography

Day mode

Night mode
Auto Da
y/Night

Adjust luminosity


Set date and time


Voice synthesis


Guidance instructions volume

Select male voice/Select female voice
1
1
12
1
2
3
3
1
1
1
3
2
2
2
4
3
3
3
3
3
2
2
2
2
2
3
3
2
2
2
1
2
2
1
4
4
2
2

271
FREQUENTLY ASKED QUESTIONS
The following tables groups together the answers to the most frequently asked questions concerning your audio system.
QUESTIONANSWERSOLUTION
The route calculation is notsuccessful. The guidance criteria may confl ict with the current location (exclusion of
toll roads on a toll motorway).
Check the guidance criteria on the NavigationMenu, "Guidance options"\"Defi ne calculation criteria".
The Risk area P
OIs do not
appear. Th
e Risk area POIs have not been selected.Select the Risk area POIs in the list of POIs.
The Risk area P
OIs have not been downloaded. Download the Risk area POIs from the CITROÀN website.
The speed camera audible
warnin
g does not work. The audible warning is not active. Activate audible warnings in the Guidance
options menu, "Navigation - guidance", "Set
parameters for risk areas".
The s
ystem does not
suggest a detour around an incident on the route. The guidance criteria do not take account of TMC messages. Select the "Traffi c info" function in the list of guidance criteria.
I receive a speed camera
alert for a speed camera
which is not on my route.
Other than guidance, the system announces all speed cameras
positioned in a cone located in front of the vehicle. It may provide an alertfor speed cameras located on nearby or parallel roads.Zoom in on the ma
p to view the exact position of
the speed camera. Select "On the route" to nolonger receive alerts other than guidance or toreduce the time for the announcement.

272
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWERSOLUTION
Certain traffi c jams alongthe route are not indicatedin real time.
On starting, it is several minutes before the system begins to receive the
traffi c information. Wait until the tra
ffi c information is being received correctly (display of the traffi c information icons
on the map).
Th
e fi lters are too restrictive. Modify the "Geographic fi lter" settings.
In certain countries, onl
y major routes (motorways...) are listed for the
traffi c information. This phenomenon is normal. The system is
dependent on the traffi c information available.
Th
e altitude is not
displayed.
On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly.Wait until the s
ystem has started up completely.
Check that there is a GPS coverage of at least
4 satellites (long press on the SETUP button,
then select "GPS coverage").
Dependin
g on the geographical environment (tunnel...) or the weather,
the conditions of reception of the GPS signal may vary.
This phenomenon is normal. The system
is dependent on the GPS signal receptionconditions.
I cannot connect my
Bluetooth telephone. The telephone's Bluetooth function ma
y be switched off or the telephone
may not be visible. - Check that
your telephone's Bluetooth
function is switched on.
-
Check in the telephone settings that it is "visible to all".
The Bluetooth telephone is not compatible with the s
ystem. A list of compatible Bluetooth mobile telephones
is available from the dealer network.
Th
e volume of the
telephone connected in Bluetooth mode isinaudible. The volume depends both on the s
ystem and on the telephone. Increase the volume of the audio system, to
maximum if required, and increase the volume of
the telephone if necessary.
The ambient noise level has an infl uence on the qualit
y of telephonecommunication.Reduce the ambient noise level
(close the
windows, reduce the booster fan speed, slow
down, ...).

273
FREQUENTLY ASKED QUESTIONS
QUESTIONANSWERSOLUTION
Some contacts are
duplicated in the list. The options for synchronizing contacts are synchronizing the contactson the SIM card, the contacts on the telephone, or both . When both synchronizations are selected, some contacts may be duplicated.
Select "Display SIM card contacts" or "Display
telephone contacts".
Contacts are not shown in
alphabetical order. Some telephones offer display options. Depending on the settingschosen, contacts can be transferred in a specifi c order.Modify the display setting in the telephone
directory.
The s
ystem does not receiveSMS text messages. The Bluetooth mode does not permit sending SMS text messages to the system.
The
CD is ejected
automatically or is notplayed by the player. The CD is inserted upside down, is unpla
yable, does not contain any
audio data or contains an audio format which the player cannot play.
Le
CD has been recorded in a format that is not compatible with
the player.
The
CD is protected by an anti-pirating protection system which is not
recognised by the audio system.- Check that the CD is inserted in the pla
yer
the right way up.
-
Check the condition of the CD: the CD cannot be played if it is too damaged.
-
Check the content in the case of a recordedCD: consult the advice in the "Audio" section.
- The audio s
ystem's CD player does not play
DVDs.
- Some recorded CDs will not be pla
yed by
the audio system because they are not of
the correct quality.
There is a long waiting periodfollowing the insertion of a CD or connection of a USBmemory stick. When a new medium is inserted, the s
ystem reads a certain amount of
data (directory, title, artist, etc.). This may take from a few seconds to a
few minutes.This phenomenon is normal.
The CD pla
yer sound ispoor. The CD used is scratched or of poor qualit
y.Insert good quality CDs and store them in suitable conditions.
The audio equipment settin
gs (bass, treble, ambiences) are unsuitable.Set the treble or bass level to 0, without
selecting an ambience.