steering Citroen C4 2014.5 2.G User Guide

160
It has 3 positions:
-  p osition   1 (Stop):
  insert   and   removing   the  
k

ey,
-
 
p
osition   2 (Ignition on) :
  steering   column  
u

nlocked,   ignition   on,   Diesel   preheating,  
e

ngine
 r
unning,
-
 
p
osition   3 (Starting).
Ignition on position
It allows the use of the vehicle's electric e
quipment   or   portable   devices   to   be   charged.
Once
  the   state   of   charge   of   the   battery   drops  
t

o   the   reserve   level,   the   system   switches   to  
e

nergy   economy   mode:   the   power   supply   is  
c

ut   off   automatically   to   preserve   the   remaining  
b

attery   charge.
Starting-switching off the engine with the key
Ignition switch
Avoid attaching heavy objects to the key,   which   would   weigh   down   on   its  
b

lade   in   the   ignition   switch   and   could  
c

ause   a   malfunction.
Switching
  off   the   engine   leads   to   a   loss  
o

f   braking   assistance.
Driving

161
Starting the engine
F With  a   petrol   engine,   operate   the   starter  m
otor   by   turning   the   key   to   position   3
without
  pressing   the   accelerator   pedal,  
u

ntil   the   engine   starts.   Once   the   engine   is  
r

unning,   release   the   key. F
 
W
ith   a   Diesel   engine,   turn   the   key   to  
p

osition 2
,   ignition   on,   to   operate   the  
eng

ine
 p
re-heating
 s
ystem.
Wait   until   this   warning   lamp   goes   off  
i

n   the   instrument   panel   then   operate  
t

he   starter   motor   by   turning   the   key  
t

o position 3   without   pressing   the  
a

ccelerator   pedal,   until   the   engine  
s

tarts.   Once   the   engine   is   running,  
r

elease   the   key.
If   the   engine   does   not   start   straight  
a

way,   switch   off   the   ignition.   Wait   a  
f

ew   moments   before   operating   the  
s

tarter   motor   again.   If   the   engine   does  
n

ot   start   after   several   attempts,   do   not  
k

eep   trying:   you   risk   damaging   the  
s

tarter   motor   or   the   engine.   Contact  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop.Never
  leave   the   engine   running   in  
a

n   enclosed   area   without   adequate  
v

entilation:
 in
ternal
 c
ombustion
 e

ngines   emit   toxic   exhaust   gases,  
s

uch   as   carbon   monoxide.   Danger   of  
i

ntoxication   and   death.
In   very   severe   wintry   conditions  
(

temperatures   below   -23°C),   to   ensure  
t

he   correct   operation   and   durability   of  
t

he   mechanical   components   of   your  
v

ehicle,   engine   and   gearbox,   it   is  n
ecessary   to   leave   the   engine   running  f
or   4   minutes   before   moving   off.
In
  certain   cases,   you   may   have   to   apply  
m

ore   force   to   the   steering   (wheels   on  
f

ull   lock,   for   example).
In   wintry   conditions,   the   warning   lamp  
c

an   stay   on   for   a   longer   period.   When  
t

he   engine   is   hot,   the   warning   lamp  
d

oes   not   come   on.In   temperate   conditions,   do   not   leave  
t

he   engine   at   idle   to   warm   up   but   move  
o

ff   straight   away   and   drive   at   moderate  
s

peed.
With   the   parking   brake   applied   and   the   gearbox  
i

n neutral or position N or P
:
F  
d
epress   the   clutch   pedal   fully   (manual  
g

earbox),


or
F  
p
ress   the   brake   pedal   firmly   (electronic   or  
a

utomatic   gearbox),
F  
i
nsert   the   key   into   the   ignition   switch;   the  
s

ystem   recognises   the   code,
F  
u
nlock   the   steering   column   by  
s

imultaneously   turning   the   steering   and   the  
k

ey.
9
Driving

162
Switching off the engine
Energy economy mode
After switching off the engine (position 1- Stop),
for   a   maximum   of   30   minutes   you   can   still   use  
f

unctions   such   as   the   audio   and   telematic  
s

ystem,   the   wipers,   dipped   beam   headlamps,  
c

ourtesy   lamps,   ...
F
 
C

heck
 
that
 
the
 
parking
 
brake
 
is
 
correctly
 
a

pplied,
 
particularly
 
on
 
sloping
 
ground.
Never
 
switch
 
off
 
the
 
ignition
 
before
 
the
 
v

ehicle
 
is
 
at
 
a
 
complete
 
stop.
 
With
 
the
 
e

ngine
 
off,
 
the
 
braking
 
and
 
steering
 
a

ssistance
 
systems
 
are
 
also
 
cut
 
off:
 
risk
 
o

f
 
loss
 
of
 
control
 
of
 
the
 
vehicle.
To
 
facilitate
 
unlocking
 
of
 
the
 
steering
 c

olumn,
 
it
 
is
 
recommended
 
that
 
the
 w

heels
 
be
 
returned
 
to
 
the
 
straight
 
ahead
 p

osition
 
before
 
switching
 
off
 
the
 
engine.
When
 
you
 
leave
 
the
 
vehicle,
 
keep
 
the
 
k

ey
 
with
 
you
 
and
 
lock
 
the
 
vehicle. For
  more   information,   refer   to   the  
"

Practical   information"   section,   under  
"

Energy   economy   mode".Key left in the "Ignition on"
position
If the key has been left in the ignition switch at position 2 (Ignition on) ,
the
  ignition   will   be   switched   off  
a

utomatically   after   one   hour.
To
  switch   the   ignition   back   on,   turn   the  
k

ey   to   position   1 (Stop),
  then   back   to  
p

osition 2 (Ignition on) .
F
 
S

top
 
the
 
vehicle.
F
 
W

ith
 
the
 
engine
 
running
 
at
 
idle,
 
turn
 
the
 
key
 t
o position 1
.
F
 R
emove
 
the
 
key
 
from
 
the
 
ignition
 
switch.
F
 
T

o
 
lock
 
the
 
steering
 
column,
 
turn
 
the
 
s

teering
 
until
 
it
 
locks.
Driving

163
Starting-switching off the engine with the 
" Keyless   Entry   and   Starting"   system
Starting the engine
F Place  the   gear   selector   lever   at   N for
vehicles   with   an   electronic   gearbox,   P or N
with
  an   automatic   gearbox,   or   neutral   with  
a m

anual
 g
earbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle  
(

it   is   not   necessary   to   put   it   in   the   reader),  
p

ress   the   brake   pedal   for   vehicles   with  
a

n   electronic   or   automatic   gearbox,   or  
f

ully   declutch   for   vehicles   with   a   manual  
g

earbox. F
b
r
iefly press the "
START/STOP"
button.
 T
he   steering   column   unlocks  
a

nd   the   engine   starts   more   or  
l

ess   instantly   (see   the   advice   for  
D

iesel
 v
ersions).
If   this   warning   lamp   comes   on   after  
p

ressing   "START/STOP",   you   should  
h

old   the   brake   or   clutch   pedal   down  
u

ntil   the   warning   lamp   goes   off   and  
d

o   not   press   the   START/STOP   button  
ag

ain.
If
  one   of   the   starting   conditions   is   not
 m
et,   a   reminder   message   appears   in t
he   instrument   panel   screen.   In   some c

ircumstances,   it   is   necessary   to   turn
 t

he   steering   wheel   slightly   while   pressing
 t

he   "START/STOP"   button   to   assist
 u

nlocking   of   the   steering;   a   message
 w

arns   you   when   this   is   needed.If
  the   electronic   key   is   not   detected   in  
t

he   zone,   a   message   is   displayed.   Move  
t

he   electronic   key   into   the   zone   so   that  
t

he   engine   can   be   started.
The   presence   of   the   "Keyless   Entry   and  
S

tarting"   system   electronic   key   in   the  
r

ecognition   zone   is   essential.
For
  safety   reasons,   do   not   leave   this  
z

one   with   the   vehicle   running.For Diesel vehicles
, in
temperatures   below   zero   the  e
ngine   will   not   start   until   the  
p

reheater   warning   lamp   has  
g

one   off.
9
driving

165
Emergency switch-off
In the event of an emergency only, the  e ngine  c an  b e  s witched  o f  w ithout  
c

onditions.   To   do   this,   press   and   hold  
t

he "START/STOP" button for about
3
  seconds.
In
 
this
 
case   the   steering   column   locks   as   soon  
a

s
 
the
 
vehicle   stops.
Electronic key not
recognised
If the electronic key is no longer in the recognition   zone   when   driving   or   when   you  
(

later)   request   switching   off   the   engine,   a  
m

essage   is   displayed.
F
 
P
ress   and   hold   the   " S TA R T/
STOP" button for about
3 seconds
  if   you   want   to   force  
s

witching   off   the   engine   (note
that restar ting will not be
possible without the key ).
Ignition on position
(without starting)
With the Keyless Entry and Starting key inside t
he   vehicle,   pressing   the   "START/STOP "
button, with no action on the pedals , allows
the
  ignition   to   be   switched   on.
With
  the   ignition   on,   the   system  
a

utomatically   goes   into   energy  
e

conomy   mode   when   required   to  
m

aintain   the   state   of   charge   of   the  
b

attery.F

P
ress the "START/STOP "
button,
  the   instrument   panel  
c

omes   on   but   the   engine   does  
n

ot   start.
F
 
P
ress   the   button   again   to   switch   off   the  
i

gnition   and   so   allow   the   vehicle   to   be  
lo

cked.
9
Driving

176
Electronic gearbox
Six-speed electronic gearbox which offers a c
hoice   between   the   comfort   of   fully   automatic  
o

peration   or   the   pleasure   of   manual   gear  
c

hanging.
There
  are   two   driving   modes:
-
 
a
utomated
 
mode   for   automatic   control  
o

f   the   gears   by   the   gearbox,   without   any  
a

ction   on   the   part   of   the   driver
-
 
m
anual
 
mode   for   sequential   gear   changing  
b

y   the   driver   using   the   steering   mounted  
p

addles. R.

R
everse
F
 
W
ith   your   foot   on   the   brake,   lift   the   lever  
an

d
 p
ush
 fo
rwards.
N.
 N

eutral.
F
 
W
ith   your   foot   on   the   brake,   select   this  
p

osition   to   start.
A.
  A

utomated   mode.
F
 
M
ove   the   lever   backwards   to   select   this  
m

ode.
M.
  S

equential   mode   with   manual   gear  
c

hanging.
F
 
M
ove   the   lever   backwards   then   to   the   left  
t

o   select   this   mode,   then   use   the   steering  
m

ounted   control   paddles   to   change   gear.Gear lever
+.  Change  up   paddle   to   the   right   of   the  s
teering w heel.
F
 
P
ress   the   back   of   the   "+"
 
steering   mounted  
p

addle   to   change   up   a   gear.
-.
  C

hange   down   paddle   to   the   left   of   the  
s

teering
 w
heel.
F
 
P
ress   the   back   of   the   "-"
 
steering   mounted  
p

addle   to   change   down   a   gear.
Steering mounted control paddles
In automated mode, you can temporarily take over   control   of   gear   changing.
The
  steering   mounted   paddles   cannot  
b

e   used   to   select   neutral   or   to   engage  
o

r
 d
isengage
 r
everse
 g
ear.
Driving

178
Automated mode
For optimum acceleration, for example when   overtaking   another   vehicle,   press   the  
a

ccelerator   pedal   firmly   past   the   point   of  
r

esistance.
The
  gearbox   operates   in   auto-active   mode,  
w

ithout   any   action   on   the   part   of   the   driver.  
It   continuously   selects   the   most   suitable   gear  
fo

r:
-  
o
ptimisation   of   fuel   consumption,
-  
t
he   style   of   driving,
-  
t
he   profile   of   the   road.
-  
t
he   vehicle   load.
AUTO
 
and   the   gear   engaged  
a

ppear   in   the   instrument   panel  
sc

reen.
ne

ver select neutral N while the vehicle
is
  moving.
ne
ver select neutral N  
w
hen
 d
riving. You
  can   change   mode   at   any   time   by  
m

oving   the   gear   lever   from   A to M or
the
  other   way   round.
F

Sel
ect position A
.
Temporary control of gear
changing
You can temporarily take over control of g
ear   changing   using   the   "+"  and   "-"  steering  
m

ounted   paddles:   if   the   engine   speed   allows,  
t

he   request   to   change   gear   is   acted   on.
This function allows you to anticipate certain
situations
  such   as   overtaking   a   vehicle   or   the  
a

pproach   to   a   corner.
After
  a   few   moments   without   any   action   on  
t

he   control   paddles,   the   gearbox   resumes  
a

utomatic   control   of   the   gears.
Manual mode
The gears engaged appear in succession   in   the   instrument   panel  
sc

reen.
The
 
gear
 
change   requests   are   only   acted   on   if  
t

he
 
engine
 
speed   permits.
It is not necessary to release the accelerator
during
 
gear
  changes.
When
 
braking   or   slowing   down,   the   gearbox  
c

hanges
 
down   automatically   to   allow   the  
v

ehicle
 
to
 
accelerate   in   the   correct   gear.
On
 
sharp
 
acceleration,   the   gearbox   will   not  
c

hange
 
up
 
unless   the   driver   acts   on   the   gear  
l

ever
 
or
 
the
  steering   mounted   paddles.
F

Sel

ect position M
.
Driving

188
The flashing and then fixed illumination   of   the   under-inflation w

arning   lamp   accompanied   by   the
 i

llumination   of   the   service   warning
 l

amp   indicates   a   fault   with   the   system.
Operating fault
The aler t  is  given  by  the  fixed  illumination o
f   this   warning   lamp,   accompanied   by a

n   audible   signal,   and   depending   on
 e

quipment,   the   display   of   a   message.
Under-inflation alert
In the event of a problem on one of the tyres, the   symbol   or   the   message   appears,   according  
t

o   equipment,   to   identify   it.
F
 
R
educe   speed,   avoid   sudden   steering  
m

ovements   or   harsh   brake   applications.
F
 
S
top   as   soon   as   it   is   safe   to   do   so. In
  this   case,   monitoring   of   the   tyre   pressures   is  
n

ot   assured.
F  
I
f   you   have   a   compressor   (the   one   in   the  
t

emporary   puncture   repair   kit   for   example),  
c

heck   the   four   tyre   pressures   when   cold.
 I

f   it   is   not   possible   to   check   the   tyre  
p

ressures   at   the   time,   drive   carefully   at  
r

educed
 s
peed.


or
F
I
n the event of a puncture, use the
temporary   puncture   repair   kit   or   the   spare  
w

heel   (according   to   equipment).
Go   to   a   CITROËN   dealer   or   a   qualified  w
orkshop to   have   the   system   checked   or,  
f

ollowing   the   repair   of   a   puncture,   to   have   the  
o

riginal   wheel,   equipped   with   a   sensor,   refitted.
Any
  tyre   repair   or   replacement   on   a   wheel  
f

itted   with   this   system   must   be   carried   out   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
If
  after   changing   a   tyre,   a   wheel   is   not   detected  
b

y   your   vehicle   (fitting   snow   tyres   for   example),  
y

ou   must   have   the   system   reinitialised   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
The
  loss   of   pressure   detected   does   not  
a

lways   lead   to   visible   deformation   of   the  
t

yre.   Do   not   rely   on   just   a   visual   check.This
  alert   is   also   displayed   when   one   or  
m

ore   wheels   is   not   fitted   with   a   sensor  
(

for   example,   a   space-saver   or   steel  
spar

e
 w
heel).
The   alert   is   maintained   until   the   tyre   or  t
yres   concerned   is   reinflated,   repaired  
o

r   replaced.
The
  spare   wheel   (space-saver   type   or   a  
s

teel   rim)   does   not   have   a   sensor.
Driving

189
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-
 
w

ith a manual gearbox ,
  at   speeds   below  
1

2
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   Diesel  
v

ersions,   when   you   put   the   gear   lever   into  
n

eutral   and   release   the   clutch   pedal,
If
  your   vehicle   is   fitted   with   the
 s

ystem,   a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-
 
w

ith an electronic gearbox ,
  at   a   speed  
b

elow   5   mph   (8   km/h),   when   you   press  
t

he
 
brake   pedal   or   put   the   gear   lever   into  
p

osition N .
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes   for   a   few   seconds,   then  
goes
  off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).  
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place   instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
With
 
an
 
electronic
 
gearbox,
 
for
 
your
 
c

omfort
 
during
 
parking
 
manoeuvres,
 
S

TOP
 
mode
 
is
 
not
 
available
 
for
 
a
 
few
 
s

econds
 
after
 
coming
 
out
 
of
 
reverse
 
g

e a r.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
9
driving

197
The programmed information is grouped together in   the   instrument   panel   screen.
6.
  S

peed   limiter   on   /   off   indication.
7.
  S

peed   limiter   mode   selection   indication.
8.
  P

rogrammed   speed   value.
9.
  S

election   of   a   memorised   speed.
Displays in the instrument panel
Speed limiter
The functions of this system are grouped together   on   the   steering   mounted   controls.
1.
 S

peed   limiter   mode   selection   wheel.
2.
 P

rogrammed   value   decrease   button.
3.
 P

rogrammed   value   increase   button.
4.
 S

peed   limiter   on   /   off   button.
5.
 L

ist   of   memorised   speeds   display   button.
Steering mounted controls
Operation
System which prevents the vehicle from exceeding the speed programmed by the driver.
W hen   the   programmed   speed   limit   is   reached,   pressing   the   accelerator   pedal   no   longer   has   any  
ef

fect.
The
  speed   limiter   is   switched on
 m
anually:
 i

t   requires   a   programmed   speed   of   at   least  
2

0 mph   (30   km/h).
The
  speed   limiter   is   switched off
 
by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
The
 
p
rogrammed  
s
peed  
r
emains  
i
n  
t
he  
m
emory  
w

hen   the   ignition   is   switched   off.
The speed limiter cannot, in any circumstances, replace   the   need   to   observe   speed   limits,   nor   can   it r

eplace   the   need   for   vigilance   on   the   part   of   the   driver.
9
Driving