Lock Citroen C4 2015 2.G Owner's Guide

61
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Ensure that nothing could prevent the correct   operation   of   the   windows.
be p

articularly aware of children when
operating
 t

he
 w
indows.
The
  direction   indicators   come   on   for   a  
f

ew   seconds.
Depending
  on   your   version,   the   door  
m

irrors   fold,   the   alarm   is   activated. For reasons of safety and theft protection,
do
  not   leave   your   electronic   key   in   the v

ehicle,   even   when   you   are   close   to   it.
It
  is   recommended   that   you   keep   it   on
 y

our   person.
Accumulations
  (water,   dust,   grime,  
s

alt...)   on   the   inner   sur face   if   the   door  
h

andle   may   affect   detection.
If
  cleaning   the   inner   sur face   of   the   door  
h

andle   using   a   cloth   does   not   restore  
d

etection, contact a CITR
oËn
dealer or
a
  qualified   workshop.
A
  sudden   splash   of   water   (stream   of  
w

ater,   high   pressure   jet   washer,   …)  
m

ay   be   identified   by   the   system   as   the  
d

esire   to   open   the   vehicle.
Locating your vehicle
This will switch on the courtesy lamps and the direction indicators will flash for around ten
seconds. F
 
P
ress   the   closed   padlock   on   the  
r

emote   control.
This function allows you to identify your vehicle
from   a   distance,   particularly   in   poor   light.   Your  
v

ehicle   must   be   locked.
3
access

62
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Back-up key
The integral key is used to lock and unlock the vehicle   when   the   electronic   key   cannot   operate:
-
 
c
ell   battery   flat,   vehicle   battery   discharged  
o

r   disconnected,   ...
-
 
v
ehicle   located   in   an   area   with   strong  
e

lectromagnetic
 si
gnals.
F

M
aintain a pull on button 1 ,
  to   extract   the  
i

ntegral   key   2.
Unlocking / Locking using the integral key with Keyless
Entry and Starting
If the alarm is activated, the audible s
ignal   triggered   on   opening   a   door  
w

ith   the   key   (integral   with   the   remote  
c

ontrol)   will   stop   when   the   ignition   is  
s

witched   on.
Locking the driver's door
F Insert   the   integral   key   in   the   door   lock,   then  t
urn   it   to   the   rear.
Unlocking the driver's door
F Insert  the   integral   key   in   the   door   lock,   then  t
urn   it   to   the   front.
Locking the passenger doors
F Open  the   doors.
F  O n   the   rear   doors,   check   that   the   child   lock  
i

s   not   on   (see   the   corresponding   section).
F
 
R
emove   the   black   cap,   located   on   the   edge  
o

f   the   door,   using   the   integral   key.
F
 
I
nsert   the   integral   key   in   the   socket   without  
f

orcing   it,   then   without   turning   it,   move   the  
l

atch sideways towards the inside of the
d o o r.
F
 
R
emove   the   integral   key   and   refit   the   cap.
F
 
C
lose   the   doors   and   check   that   the   vehicle  
h

as   locked   correctly   from   the   outside.
Unlocking the passenger doors
F Pull  the   interior   door   opening   control.
access

63
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Changing the battery
Following disconnection of the vehicle battery, replacement   of   the   remote   control   battery   or  
i

n   the   event   of   a   remote   control   malfunction,  
y

ou   can   no   longer   unlock,   lock   or   locate   your  
v

ehicle.
Remember
  to   refit   the   mat   below   the   armrest  
a

fter   removing   the   reinitialised   electronic   key.
Remote control problem /
reinitialisation
F Place  the   back-up   key   (integral   with   the  r
emote   control)   in   the   lock   to   unlock   your  
v

ehicle.
F
 
O
pen   the   front   armrest.
This
  symbol   indicates   the   location  
p

rovided   for   back-up   reading   below  
t

he   mat. F
 
R
aise   the   mat   by   its   tongue   and   remove   it.
F  
P
lace   the   electronic   key   on   the   back-up  
re

ader.
F  
S
witch   on   the   ignition   by   pressing   the  
"
ST
ART/STOP
"   button.
The   electronic   key   is   fully   operational   again.
If   the   problem   persists,   contact   a   CITROËN  
d

ealer   or   a   qualified   workshop   as   soon   as  
p

ossible.
Battery
 
ref.:
 
CR2032
 
/
 
3
 
volts.
Battery
 
replacement
 
is
 
signalled
 
by
 
the
 
display
 
o

f
 
a
 
message.
F
 
U

nclip
 
the
 
cover
 
using
 
a
 
small
 
screwdriver
 a
t
 
the
 
cutout.
F
 L
ift
 
off
 
the
 
cover.
F
 
R

emove
 
the
 
flat
 
battery
 
from
 
its
 
location.
F

F

it the new battery into its location
observing
 
the
 
original
 
direction
 
of
 
fitment.
F
 
C

lip
 
the
 
cover
 
onto
 
the
 
casing.
3
Access

64
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of   your   vehicle.   You   run   the   risk   of   stopping   it   from  
w

orking   and   the   remote   control   would   have   to   be   reinitialised.
The
  remote   control   does   not   operate   when   the   key   is   in   the   ignition,   even   when   the   ignition   is   switched   off.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency services more difficult in an emergency.
A s   a   safety   precaution   (with   children   on   board),   remove   the   key   from   the   ignition   or   take   the   electronic   key   when   you   leave   the   vehicle,   even   for  
a

  short   time.
Electrical interference
The Keyless Entry and Starting electronic key may not operate if close to certain electronic devices: telephone, laptop computer, strong magnetic   fields,   ...
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause malfunctions.
D on't   forget   to   turn   the   steering   to   engage   the   steering   lock.
Lost keys, remote control, electronic key
Visit a CITROËN dealer with the vehicle's V5 registration document and your personal identification documents.
T he   CITROËN   dealer   will   be   able   to   retrieve   the   key   code   and   the   transponder   code   required   to   order   a   replacement.
Do
  not   throw   the   remote   control   batteries   away,   they   contain   metals   which   are   harmful   to   the   environment.
Take
  them   to   an   approved   collection   point.
When purchasing a second-hand vehicle
Have the key codes memorised by a CITROËN dealer, to ensure that the keys in your possession are the only ones which can start the vehicle.
Access

65
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Central locking control
Locking
F Press  this   button   to   lock   the   vehicle.
The   red   indicator   lamp   in   the   button   comes   on.
Unlocking
F Press  the   button   again   to   unlock   the  v
ehicle.
The
  red   indicator   lamp   in   the   button   goes   off.
This
 
control
 
allows
 
the
 
simultaneous
 
locking
 
or
 
unlocking   of   the   doors   and   boot   from   inside   the  
v

ehicle.
If one of the doors is open, central
locking
 
from
 
the
 
inside
 
does
 
not
 
take
 
p

lace. If
  the   vehicle   is   locked   from   the   outside,  
t

his   button   is   inactive.
F
 
I
n   this   case,   use   the   remote   control  
o

r   the   key   to   unlock   the   vehicle   or  
p

ull an interior door handle to open
a
  door.
3
Access

66
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Activation / Deactivation
You can activate or deactivate this function
permanently.
F 
W
ith   the   ignition   on,   press   this   button  
u

ntil   an   audible   signal   starts   and   a  
c

orresponding   message   is   displayed.
The
  state   of   the   system   stays   in   memory   when  
s

witching   off   the   ignition.
anti-intrusion security
Operation
If one of the doors or the boot is open, the
automatic  central   locking   does   not   take   place.
This
  system   allows   automatic   simultaneous   locking   of   the   doors   and   boot   as   soon   as   the   speed   of  
t

he   vehicle   exceeds   6   mph   (10   km/h).
Pressing   the   central   locking   button   unlocks   the  
v

ehicle.
Above
  6   mph   (10   km/h),   this   locking   is  
t

e m p o r a r y. This
  is   signalled   by   the   sound   of  
t

he   locks   rebounding,   accompanied  
b

y   illumination   of   this   symbol   in   the  
i

nstrument   panel,   an   audible   signal  
a

nd   the   display   of   an   alert   message.
Carrying long and voluminous
objects
If you want to drive with the boot open,
you
  should   press   the   central   locking  
b

utton   to   lock   the   the   doors.   Other wise,  
e

very   time   the   speed   of   the   vehicle  
e

xceeds   6   mph   (10   km/h),   the   locks  
w

ill   rebound   and   the   alerts   mentioned  
a

bove   will   appear.
Access

68
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Locking the vehicle with full
alarm system
Activation
F Switch  off   the   ignition   and   get   out   of   the  v
ehicle.
F
 
L
ock   the   vehicle   with   the   remote   control.
or
F
 
L
ock   the   vehicle   with   the   "Keyless   Entry  
a

nd   Starting"   system.
Deactivation
F Press  the   unlocking   button   on   the   remote  c
ontrol.
or
F
 
U
nlock   the   vehicle   with   the   "Keyless   Entry  
a

nd   Starting"   system.
The
  monitoring   system   is   deactivated:   the  
i

ndicator   lamp   in   the   button   goes   off   and   the  
d

irection   indicators   flash   for   about   2   seconds.
If
 
an
 
opening
 
(door,
 
boot...)
 
is
 
not
 
closed
 
f

ully,
 
the
 
vehicle
 
is
 
not
 
locked
 
but
 
the
 
exterior
 
p

erimeter
 
monitoring
 
will
 
be
 
activated
 
after
 
a
 
d

elay
 
of
 
45
 
seconds
 
at
 
the
 
same
 
time
 
as
 
the
 
i

nterior
 
volumetric
 
and
 
anti-tilt
 
monitoring. When
  the   vehicle   automatically   locks  
i

tself   again   (as   happens   if   a   door   or  
b

oot   is   not   opened   within   30   seconds   of  
u

nlocking),   the   monitoring   system   is   not  
r

eactivated   automatically.   To   reactivate  
t

he   system,   it   is   necessary   to   unlock  
t

he   vehicle   and   then   lock   it   again   using  
t

he   remote   control   or   the   "Keyless   Entry  
a

nd   Starting"   system.
The
 
monitoring
 
system
 
is
 
active:
 
the
 
indicator
 l
amp
 
in
 
the
 
button
 
flashes
 
once
 
per
 
second
 a
nd
 
the
 
direction
 
indicators
 
come
 
on
 
for
 
about
 
2

 
seconds.
Following
 
an
 
instruction
 
to
 
lock
 
the
 
vehicle,
 
t

he
 
exterior
 
perimeter
 
monitoring
 
is
 
activated
 
a

fter a delay of 5 seconds and the interior
volumetric
 
and
 
anti-tilt
 
monitoring
 
after
 
a
 
delay
 
o

f
 
45 seconds.
Access

69
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Locking the vehicle
with exterior perimeter
monitoring only
Deactivate the interior volumetric and anti-tilt monitoring   to   avoid   unwanted   triggering   of   the  
a

larm   in   certain   cases   such   as:
-
 
l
eaving   a   pet   in   the   vehicle,
-
 
l
eaving   a   window   partially   open,
-
 
w
ashing   your   vehicle,
-
 
c
hanging   a   wheel,
-
 
h
aving   your   vehicle   towed,
-
 
t
ransport   by   sea.
Deactivation of the interior
volumetric and anti-tilt monitoring
F Switch  off   the   ignition   and   within  t
en seconds, press the button until the
indicator
  lamp   is   on   continuously.
F
 
G
et   out   of   the   vehicle.
F
 
I
mmediately   lock   the   vehicle   using   the  
r

emote   control   or   the   Keyless   Entry   and  
S

tarting   system.
The
  exterior   perimeter   monitoring   alone   is  
a

ctivated:   the   indicator   lamp   in   the   button  
f

lashes   once   per   second.
Reactivation of the interior
volumetric and anti-tilt monitoring
F Deactivate  the   perimeter   monitoring   by  u
nlocking   the   vehicle   with   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem.
 T

he   indicator   lamp   in   the   button   goes   off.
F
 
R
eactivate   all   monitoring   by   locking   the  
v

ehicle   with   the   remote   control   or   the  
K

eyless   Entry   and   Starting   system.
 T

he   indicator   lamp   in   the   button   flashes  
o

nce   per   second   again.
To
  be   effective,   this   deactivation   must  
b

e   carried   out   each   time   the   ignition   is  
s

witched   off.
3
Access

70
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
Operating fault
When the ignition is switched on, fixed illumination   of   the   indicator   lamp   in   the   button  
i

ndicates   a   fault   with   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Failure of the remote control
To deactivate the monitoring functions:
F  
u
nlock   the   vehicle   using   the   key   (integral   to  
t

he
 
remote
 
control)
 
in
 
the
 
driver's
 
door
 
lock,
F
 
o
pen   the   door;   the   alarm   is   triggered,
F
 
s
witch   on   the   ignition;   the   alarm   stops;   the  
i

ndicator   lamp   in   the   button   goes   off.
Locking the vehicle without
activating the alarm
F Lock  or   deadlock   the   vehicle   using   the key  (
integral   to   the   remote   control)   in   the  
d

river's   door   lock.
Triggering of the alarm
This is indicated by sounding of the siren and flashing   of   the   direction   indicators   for   thirty  
se

conds.
The
  monitoring   functions   remain   active   until  
t

he   alarm   has   been   triggered   eleven   times   in  
s

uccession.
When
  the   vehicle   is   unlocked   using   the   remote  
c

ontrol   or   the   Keyless   Entry   and   Starting  
s

ystem,   rapid   flashing   of   the   indicator   lamp  
i

n   the   button   informs   you   that   the   alarm   was  
t

riggered   during   your   absence.   When   the  
i

gnition   is   switched   on,   this   flashing   stops  
i

mmediately.
Access

71
C4-2_en_Chap03_ouvertures_ed01-2015
C4-2_en_Chap03_ouvertures_ed01-2015
doors
Opening
From outside
F After  unlocking   the   vehicle   using   the  r
emote   control,   the   key   or   with   the   Keyless  
E

ntry   and   Starting   system,   pull   the   door  
han

dle.
From inside
F Pull  the   interior   control   lever   of   a   front   door;  t
his   unlocks   the   vehicle   completely.
Closing
- when the engine is running ,
this   warning   lamp   comes  
o

n,   accompanied   by   an   alert  
m

essage   for   a   few   seconds,
With
 
the
 
selective
 
unlocking
 
activated:
-
 
o

pening
 
the
 
the
 
driver's
 
door
 
u

nlocks
 
the
 
driver's
 
door
 
only
 

(if
 
the
 
vehicle
 
has
 
not
 
already
 
been
 
c

ompletely
 u

nlocked).
-
 
o

pening
 
one
 
of
 
the
 
passenger
 
d

oors
 
unlocks
 
the
 
rest
 
of
 
the
 
v

ehicle.
When
 
the
 
selective
 
unlocking
 
is
 
a

ctivated,
 
the
 
first
 
press
 
of
 
the
 
remote
 
c

ontrol
 
unlocking
 
button
 
permits
 
u

nlocking
 
of
 
the
 
driver's
 
door
 
only. When
 
a
 
door   is   not   closed   correctly:
-

w

hen the vehicle is moving   (speed  
h

igher   than   6   mph   (10   km/h)),   this   warning  
l

amp
 
comes   on,   accompanied   by   an   alert  
m

essage   for   a  
few
 
seconds.
3
access