check engine Citroen C4 2015 2.G Owner's Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2015, Model line: C4, Model: Citroen C4 2015 2.GPages: 494, PDF Size: 20.49 MB
Page 215 of 494

213
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Petrol engines
The various caps and covers allow access for
checking the  levels  of  the  various  fluids  and  for r
eplacing  certain  components.
1.
 P
ower
 s
teering
 r
eservoir.
2.
 S
creenwash  and  headlamp  wash  reservoir.
3.
 C
oolant
 r
eservoir.
4.
 B
rake  fluid  reservoir.
5.
 B
attery/Fuses.
6.
 F
usebox.
7.
 A
ir  filter.
8.
 E
ngine  oil  dipstick.
9.
 E
ngine  oil  filler  cap.
10
Checks
Page 216 of 494

214
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
* According to engine.
Diesel engines
The various caps and covers allow access for
checking the  levels  of  the  various  fluids,  for Â
r
eplacing  certain  components  and  for  priming Â
t
he  fuel  system.
1.
 P
ower
 s
teering
 r
eservoir.
2.
 S
creenwash  and  headlamp  wash  reservoir.
3.
 C
oolant
 r
eservoir.
4.
 B
rake  fluid  reservoir.
5.
 B
attery/Fuses.
6.
 F
usebox.
7.
 A
ir  filter.
8.
 E
ngine  oil  dipstick.
9.
 E
ngine  oil  filler  cap.
10.
 P
riming
 pu
mp*.
11.
 B
leed  screw*.
Checks
Page 217 of 494

215
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Checking levels
The check is carried out either when the  ignition  is  switched  on  using  the Â
o
il  level  indicator  in  the  instrument Â
p
anel  for  vehicles  so  equipped,  or Â
u
sing  the  dipstick.
Engine oil level
Checking using
the dipstick
Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless other wise indicated.
I f  a  level  drops  significantly,  have  the  corresponding  system  checked  by  a  CITROËN  dealer  or  a  qualified  workshop.
It
 is  normal  to  top  up  the  oil  level  between Â
t
wo  services  (or  oil  changes).  CITROËN Â
r
ecommends  that  you  check  the  level,  and  top Â
u
p  if  necessary,  every  3  000  miles  (5  000  kms).A
 =  MA X
B
 =  MINIf you find that the level is above the A
 mark  or Â
belo
w the B Â mark, Â do not star t the engine.
-
I
f the level is above the MAX
Â
mark  (risk Â
o
f  damage  to  the  engine),  contact  a Â
C
ITROËN  dealer  or  a  qualified  workshop.
-
I
f the level is below the MIN
Â
mark, Â you Â
m
ust  top  up  the  engine  oil.
Oil grade
Before topping-up the oil or changing the oil, check  that  the  oil  is  the  correct  grade  for  your Â
e
ngine  and  conforms  to  the  manufacturer's Â
r
ecommendations.
Take
Â
care
Â
when
Â
working
Â
under
Â
the
Â
b
onnet,
Â
as
Â
certain
Â
areas
Â
of
Â
the
Â
engine
Â
m
ay
Â
be
Â
extremely
Â
hot
Â
(risk
Â
of
Â
burns)
Â
and
Â
t
he
Â
cooling
Â
fan
Â
could
Â
start
Â
at
Â
any
Â
time
Â
(
even
Â
with
Â
the
Â
ignition
Â
off).
To
Â
ensure
Â
that
Â
the
Â
reading
Â
is
Â
correct,
 y
our
Â
vehicle
Â
must
Â
be
Â
parked
Â
on
Â
a
Â
level
Â
s
ur face
Â
with
Â
the
Â
engine
Â
having
Â
been
Â
off
Â
f
or
Â
more
Â
than
Â
30
Â
minutes. Refer
Â
to
Â
the
Â
"Petrol
Â
engine"
Â
or
Â
"Diesel
Â
engine"
Â
s
ection
Â
for
Â
the
Â
location
Â
of
Â
the
Â
dipstick
Â
in
Â
the
Â
e
ngine
Â
compartment
Â
of
Â
your
Â
vehicle.
F
Â
T
ake
Â
the
Â
dipstick
Â
by
Â
its
Â
coloured
Â
grip
Â
and
Â
r
emove
Â
it
Â
completely.
F
Â
W
ipe
Â
the
Â
end
Â
of
Â
the
Â
dipstick
Â
using
Â
a
Â
clean
Â
n
on-fluffy
Â
cloth.
F
Â
R
efit
Â
the
Â
dipstick
Â
and
Â
push
Â
fully
Â
down,
Â
then
Â
p
ull
Â
it
Â
out
Â
again
Â
to
Â
make
Â
the
Â
visual
Â
check:
Â
t
he
Â
correct
Â
level
Â
is
Â
between
Â
the
Â
marks
Â
A
and B .
10
Checks
Page 218 of 494

216
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Topping up the engine oil level
Refer to the "Petrol engine" or "Diesel engine" section for the location of the oil filler cap in the
engine
 compartment  of  your  vehicle.
F
Â
U
nscrew  the  oil  filler  cap  to  reveal  the  filler Â
a
perture.
F
Â
A
dd  oil  in  small  quantities,  avoiding  any Â
s
pills  on  engine  components  (risk  of  fire).
F
Â
W
ait  a  few  minutes  before  checking  the Â
l
evel  again  using  the  dipstick.
F
Â
A
dd  more  oil  if  necessary.
F
Â
A
fter  checking  the  level,  carefully  refit  the Â
o
il  filler  cap  and  the  dipstick  in  its  tube.
After
 topping  up  the  oil,  the  check  when Â
s
witching  on  the  ignition  with  the  oil  level Â
i
ndicator  in  the  instrument  panel  is  not  valid Â
d
uring  the  30  minutes  after  topping  up.
Engine oil change
Refer to the manufacturer's service schedule for  details  of  the  interval  for  this  operation.
In
 order  to  maintain  the  reliability  of  the  engine Â
a
nd  emission  control  system,  never  use Â
a
dditives  in  the  engine  oil.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for  details  of  the  interval  for  this  operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
The
 brake  fluid  level  should  be  close Â
t
o  the  "MA X"  mark.  If  it  is  not,  check Â
t
he  brake  pad  wear.
Power steering
fluid level
The power steering fluid level should b
e  close  to  the  "MA X"  mark.  With  the e
ngine  cold,  unscrew  the  cap  to  check
 t
he  level.
Checks
Page 219 of 494

217
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Screenwash / headlamp
wash fluid level
Specification of the fluid
To ensure optimum cleaning and to avoid freezing,  the  fluid  should  never  be  topped  up  or r
eplaced  by  plain  water.
In wintry conditions, the use of a fluid
with
 an  ethyl  alcohol  or  methanol  base  is Â
re
commended.
To
Â
check
Â
the
Â
level
Â
or
Â
top
Â
up
Â
the
Â
f
luid
Â
on
Â
vehicle
Â
fitted
Â
with
Â
headlamp
Â
w
ashers,
Â
immobilise
Â
the
Â
vehicle
Â
and
Â
s
witch
Â
of
Â
the
Â
engine.
F
o
p
en the bonnet and secure it with the
st ay.
F
Â
O
pen
Â
the
Â
screenwash
Â
reservoir
Â
filler
Â
cap.
F
Â
T
ake
Â
and
Â
pinch
Â
the
Â
level
Â
gauge
Â
to
Â
block
Â
its
Â
b
reather.
F
Â
R
emove
Â
the
Â
gauge
Â
completely
Â
from
Â
t
he reservoir to read the level in the
transparent
 s
ection.
Coolant level
The coolant level should be close
to  the  "MA X"  mark  but  should  never Â
e
xceed  it.
Fluid specification
The coolant must conform to the manufacturer's r ecommendations.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
When
 the  engine  is  warm,  the  temperature  of Â
t
he  coolant  is  regulated  by  the  fan.
In  addition,  as  the  cooling  system  is Â
p
ressurised, wait at least one hour after
switching  off  the  engine  before  carrying  out Â
any  work.
To  avoid  any  risk  of  scalding,  unscrew  the  cap Â
b
y  two  turns  to  allow  the  pressure  to  drop. Â
W
hen  the  pressure  has  dropped,  remove  the Â
c
ap  and  top  up  the  level. F Â
T
op  up  if  necessary.
F
R
efit the filler cap to the reservoir and
close  the  bonnet.
10
Checks
Page 221 of 494

219
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Checks
Particle filter (Diesel)
- fixed illumination  of  the  particle  f
ilter  warning  lamp,  accompanied Â
b
y  an  audible  signal  and  a Â
m
essage  that  there  is  a  risk  of Â
b
lockage  of  the  particle  filter.
The presence of this label, in particular with
the
Â
Stop
Â
&
Â
Start
Â
system,
Â
indicates
Â
the
Â
use
Â
of
Â
a s
pecific 12 V lead-acid battery with special
technology
Â
and
Â
specification.
Â
The
Â
involvement
Â
o
f
Â
a
Â
CITROËN
Â
dealer
Â
or
Â
a
Â
qualified
Â
workshop
Â
i
s
Â
essential
Â
when
Â
replacing
Â
or
Â
disconnecting
Â
t
he
Â
battery. As
Â
soon
Â
as  the  traffic  conditions  permit, Â
r
egenerate  the  filter  by  driving  at  a  speed  of  at Â
l
east
Â
40
Â
mph  (60  km/h)  until  the  warning  lamp Â
g
oes
Â
off.
If
Â
the
Â
warning  lamp  stays  on,  refer  to  the Â
"
Additive
Â
level" Â section.
Unless
Â
other wise
Â
indicated,
Â
check
Â
these
Â
components
Â
in
Â
accordance
Â
with
Â
the
Â
manufacturer's
Â
service
Â
schedule
Â
and  according  to  your  engine.
Other wise,
Â
have
Â
them
Â
checked
Â
by
Â
a
Â
CITROËN
Â
dealer
Â
or
Â
a
Â
qualified
Â
workshop.
Air filter and passenger compartment filter
Refer to the manufacturer's s
ervice schedule for details of the
replacement
 intervals  for  these Â
c
omponents.
Oil filter
Replace the oil filter each time the e ngine  oil  is  changed.
Refer
 to  the  manufacturer's Â
s
ervice schedule for details of
the
 replacement  interval  for  this Â
c
omponent.
12 V battery
The battery does not require any maintenance.
H owever,  check  that  the  terminals  are  clean a
nd  correctly  tightened,  particularly  in  summer
 a
nd  winter.
When carrying out work on the battery, refer to the "12 V battery" section for details of the
precautions
 to  be  taken  before  disconnecting Â
t
he  battery  and  following  its  reconnection.Depending
 on  the  environment  (e.g.  dusty  a
tmosphere)  and  the  use  of  the  vehicle Â
(e.g.
 city  driving),  replace them twice as often
if necessary .
A
 clogged  passenger  compartment  filter  may Â
h
ave  an  adverse  effect  on  the  per formance Â
o
f  the  air  conditioning  system  and  generate Â
u
ndesirable
 o
dours.The start of saturation of the particle filter is
indicated
 by:
on a n
ew vehicle, the first operations of
regeneration
 of  the  particle  filter  may  be Â
a
ccompanied  by  the  smell  of  "burning", Â
w
hich  is  per fectly  normal.
Following
 prolonged  operation  of  the Â
v
ehicle at very low speed or at idle,
you
 may,  in  exceptional  circumstances, Â
n
otice  the  emission  of  water  vapour  at Â
t
he  exhaust  on  acceleration.  This  does Â
n
ot affect the behaviour of the vehicle
or
 the  environment.
10
Checks
Page 223 of 494

221
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
adblue® additive and SCR system
f
or
Â
BlueHDi  Diesel  engines
To assure respect for the environment and c
onformity  with  the  new  Euro  6  emissions Â
s
tandard,  without  adversely  affecting  the Â
p
er formance  or  fuel  consumption  of  Diesel Â
e
ngines,  CITROËN  has  taken  the  decision  to Â
e
quip  its  vehicles  with  an  effective  system  that Â
a
ssociates  SCR  (Selective  Catalytic  Reduction) Â
w
ith  a  particle  filter  (FAP)  for  the  treatment  of Â
e
xhaust  gases.
Presentation of the SCR system
Using an additive called AdBlue® containing urea, a
Â
catalytic
Â
converter
Â
turns
Â
up
Â
to
Â
85%  of  nitrous o
xides
Â
(NOx)
Â
into
Â
nitrogen
Â
and
Â
water,  which  are
 h
armless
Â
to
Â
health
Â
and
Â
the
Â
environment.
The adblue® additive is held in a special
tank
Â
located
 under  the  boot  at  the  rear  of Â
t
he
Â
vehicle.
Â
It  has  a  capacity  of  17  litres:  this Â
p
rovides
Â
a
Â
driving  range  of  about  12  500  miles Â
(
20
Â
000
Â
km),
 after  which  an  alert  is  triggered Â
w
arning
Â
you
Â
when  the  reserve  remaining  is Â
e
nough
Â
for
Â
just  1  500  miles  (2  400  km).
During
Â
each
 scheduled  service  of  your  vehicle Â
b
y
Â
a
Â
CITROËN  dealer  or  a  qualified  workshop, Â
t
he
a
d
blu
e
® additive tank is refilled in order to a
llow
Â
normal  operation  of  the  SCR  system.
If
Â
the
Â
estimated  mileage  between  two  services Â
i
s
Â
greater
Â
than  12  500  miles  (20  000  km),  we Â
r
ecommend
 that  you  go  to  a  CITROËN  dealer Â
o
r
Â
a
Â
qualified  workshop  to  have  the  necessary Â
t
op-up
Â
carried  out.
on
ce the a
dbl
ue
® tank is empty, a s
ystem
Â
required
Â
by  regulations  prevents Â
s
tarting
Â
of
Â
the
Â
engine.
If the SCR
is faulty, the level of
emissions
Â
from
Â
your  vehicle  will  no Â
l
onger
Â
meet
Â
the
Â
Euro  6  standard:  you Â
v
ehicle
Â
becomes
Â
polluting.
In
Â
the
Â
event
Â
of
Â
a
Â
confirmed  fault Â
w
ith
Â
the
Â
SCR
Â
system,  you  must  go Â
t
o
Â
a
Â
CITROËN
Â
dealer  or  a  qualified Â
w
orkshop
Â
as
Â
soon  as  possible:  after Â
a
Â
running
Â
distance  of  650  miles Â
(
1Â 100
Â
km),
Â
a
Â
system  will  be  triggered Â
a
utomatically
Â
to
Â
prevent  engine  starting.
10
Checks
Page 224 of 494

222
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Range indicators
When switching on the ignition, an indicator gives  an  estimate  of  the  distance  that  can Â
b
e  travelled  with  your  vehicle  before  engine Â
s
tarting  is  automatically  prevented,  once  the Â
v
ehicle  starts  using  the  reserve  of  AdBlue
® or
after
Â
a
Â
fault
Â
is
Â
detected
Â
with
Â
the
Â
SCR
Â
system.
In
Â
the
Â
event
Â
of
Â
simultaneous
Â
system
Â
fault
Â
and Â
l
ow
a
d
blu
e
® level, the shortest range is the one d
isplayed.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
W hen  the  ignition  is  switched  on,  no Â
i
nformation  on  range  is  displayed  automatically Â
i
n  the  instrument  panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning  lamp  comes  on,  accompanied  by  an Â
a
udible  signal  and  the  temporary  display  in Â
t
he  instrument  panel  of  "NO  START  IN"  and Â
a
 distance,  indicating  the  remaining  range Â
e
xpressed  in  miles  or  kilometres  before Â
e
ngine  starting  is  prevented  -  (For  example Â
"
NO START  IN  900  miles"  means  that  "Starting Â
w
ill  be  prevented  in  900  miles).
When
 driving,  this  display  appears  every Â
1
50 miles  (300  km)  until  the  additive  tank  has Â
be
en
 t
opped-up.
Go
 to  a  CITROËN  dealer  or  a  qualified Â
w
orkshop  to  have  the  AdBlue
® tank topped-up.
Y
ou
Â
can
Â
also
Â
top-up
Â
the
Â
tank
Â
yourself.
Refer
Â
to
Â
the
Â
"Topping-up"
Â
section.
The
Â
engine
Â
start
Â
prevention
Â
system
Â
r
equired
Â
by
Â
regulations
Â
is
Â
activated
Â
a
utomatically
Â
once
Â
the
Â
AdBlue
® tank is e
m pt y.
Checks
Page 225 of 494

223
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE warning  lamp  comes  on  and  the  UREA Â
w
arning  lamp  flashes,  accompanied  by  an Â
a
udible  signal  and  the  temporary  display  in  the Â
i
nstrument  panel  of  "NO  START  IN"  and Â
0
 km  or  miles  -  ("NO  START  IN  0  miles"  means Â
"
Starting
 p
revented").
The
a d
blu
e
® tank is  empty:  t he  s ystem  r equired  b
y
Â
regulations  prevents  engine  starting.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE warning  lamp  comes  on  and  the  UREA Â
w
arning  lamp  flashes,  accompanied  by  an Â
a
udible  signal  and  the  temporary  display  in Â
t
he  instrument  panel  of  "NO  START  IN"  and Â
a
 distance  indicating  the  remaining  range Â
e
xpressed  in  miles  or  kilometres  before Â
e
ngine  starting  is  prevented  -  (For  example Â
"
NO START  IN  350  miles"  means  "Starting  will Â
b
e  prevented  in  350  miles).
When
 driving,  this  display  appears  every Â
3
0  seconds  until  the  additive  tank  has  been Â
t
opped-up.
Go
 to  a  CITROËN  dealer  or  a  qualified Â
w
orkshop  to  have  the  AdBlue
® tank topped-up.
Y
ou
Â
can
Â
also
Â
top-up
Â
the
Â
tank
Â
yourself.
Refer
Â
to
Â
the
Â
"Topping-up"
Â
section.
ot
her wise you will not be able to restart your
engine. To
 be  able  to  start  the  engine, Â
w
e  recommend  that  you  call  on Â
a
 CITROËN  dealer  or  a  qualified Â
w
orkshop  for  the  top-up  required.  If Â
y
ou carry out the top-up yourself, it is
essential  to  add  at  least  3.8  litres  of Â
a d
blu
e
® to the additive tank.
R
efer
Â
to
 the  "Topping-up"  section.
10
Checks
Page 226 of 494

224
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
In the event of a fault with the the SCR emissions control system
In the event of the detection of a fault
The UREA,  SERVICE  and  diagnostic  warning Â
l
amps  comes  on,  accompanied  by  an  audible Â
s
ignal  and  the  display  of  the  message Â
"
Emissions
 f
ault".
The
 alert  is  triggered  when  driving,  when Â
t
he  fault  is  detected  for  the  first  time,  then Â
w
hen  switching  on  the  ignition  for  subsequent Â
j
ourneys,  while  the  fault  persists.During an authorised driving phase
(between 650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed ( after  30  miles  (50  km)  covered  with  the Â
p
ermanent  display  of  the  message  signalling Â
a
 fault),  the  SERVICE  and  engine  diagnostic Â
w
arning  lamps  come  on  and  the  UREA Â
w
arning  lamp  flashes,  accompanied  by  an Â
a
udible  signal  and  the  temporary  display  in Â
t
he  instrument  panel  of  "NO  START  IN"  and Â
a
 distance,  indicating  the  remaining  range Â
e
xpress  in  miles  or  kilometres  before  engine Â
s
tarting  is  prevented  -  (e.g.:  "NO  START  IN Â
350
 miles"  means  "Starting  will  be  prevented Â
in
 350  miles").
A
Â
system
Â
that
Â
prevents
Â
engine
Â
starting
Â
is
Â
activated  automatically  from  650  miles  (1  100  km)  after  confirmation  of  a  fault  with  the  SCR  emissions Â
c
ontrol
Â
system.
Â
Have
Â
the
Â
system
Â
checked
Â
by
Â
a  CITROËN  dealer  or  a  qualified  workshop  as  soon  as  possible.
If
Â
it
Â
is
Â
a
Â
temporary
Â
fault,
Â
the
Â
alert
Â
d
isappears
Â
during
Â
the
Â
next
Â
journey,
Â
a
fter
Â
a
Â
self
Â
diagnosis
Â
test
Â
of
Â
the
Â
SCR
Â
e
missions
Â
control
Â
system. While
 driving,  this  display  appears  every Â
30  seconds  while  the  fault  with  the  SCR  system Â
p
ersists.
The
 alert  is  repeated  when  switching  on  the Â
ig
nition.
You
 should  go  to  a  CITROËN  dealer  or  a Â
q
ualified  workshop  as  soon  as  possible.
ot
her wise, you will not be able to restart your
engine.
Checks