service indicator Citroen C4 AIRCROSS 2014 1.G Owner's Manual

44
Monitoring






Service indicator

System which informs the driver when the
next ser vice is due in accordance with the
manufacturer's ser vicing schedule.
The point at which the next ser vice is due is
calculated from the last ser vice indicator zero
reset.
It is determined by two parameters:


- the distance travelled (in miles (km)),

- the time elapsed since the last ser vice
(in months).
The distance remaining to be travelled may be
weighted by the time factor, depending on the
use made of the vehicle.

Example:
the screen indicates that 7300 miles
(kilometres) remain before the next service
is due.
Service overdue


Example:
the screen indicates that the ser vice
is overdue. This ser vice must be carried out by
a CITROËN dealer or a qualified workshop.


Operation

The symbol "--

"
remains displayed until
the first ser vice of a new vehicle has
been carried out. Each time the ignition is switched on, the
"ROUTINE MAINTENANCE REQUIRED"
symbol is displayed for a few seconds to indicate
that the ser vice must be carried out without delay. When the ignition is switched on, you must press
the INFO
button several times in succession
until the ser vice indicator is displayed. The
distance recorder display line indicates the
number of miles or kilometres remaining and
the time elapsed line indicates the number of
months remaining before the next ser vice is due.

1
45
Monitoring

Resetting the service indicator
to zero

After a certain distance and a certain
time, the display of "---

"
is reset
automatically and the display indicates
the time remaining before the next
ser vice is due.
Your CITROËN dealer or a qualified workshop
carries out this operation after each ser vice.
If you have carried out your vehicle's ser vice
yourself, the zero reset procedure is the
following:


)
switch off the ignition,

)
press the INFO
button several times in
succession until the ser vice indicator is
displayed,

)
press and hold the INFO
button for a few
seconds until the spanner flashes
,

)
press the INFO
button while the spanner
is flashing to change the display "---

"
to
"CLEAR"
then the time remaining before
the next service is due is displayed.

75
2
Access
For all work on the alarm system,
contact a CITROËN dealer or a
qualified workshop.






Alarm *
System which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring:




- perimeter

The system checks for any opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet....


- volumetric

The system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks a
window, enters the passenger compartment or
moves inside the vehicle.




- tilt

The system checks for any change in the
attitude of the vehicle.
The alarm is triggered if the vehicle is lifted,
moved or knocked.




Self-protection function

The system checks for the putting out of
ser vice of its components.
The alarm is triggered if the battery, the central
control or the siren wiring are put out of service
or damaged.


Locking the vehicle with full
alarm system

Activation



)
Switch off the ignition (OFF mode if your
vehicle has the Keyless Entry and Starting
system).

)
Remove the key from the ignition switch,
if your vehicle does not have the "Keyless
Entry and Starting" system.

)
Leave the vehicle, and close all the doors
and the bonnet.

)
Press the locking button on the remote
control or one of the door or boot buttons
if your vehicle has the "Keyless Entry and
Starting" system.


Deactivation

Do one of the the following to deactivate the
alarm:


)
Press the unlocking button on the remote
control or one of the door or boot buttons
if your vehicle has the "Keyless Entry and
Starting" system.

)
Switch on the ignition (ON mode if your
vehicle has the "Keyless Entry and
Starting" system).

)
Open a door or the boot while the system is
being activated.
The alarm system is deactivated: the indicator
lamp A
goes off.
The alarm is being activated: the indicator
lamp A
flashes rapidly accompanied by
an intermittent audible signal for about
20 seconds.
Once the 20 seconds have expired, the
system is active
. The audible signal stops and
the indicator lamp in the button flashes slowly.

*
According to equipment.